Glda690mbb Parts

This connecting ring nut secures a threaded water-path connection inside the dishwasher, helping keep the joint tight and leak-resistant. Replace a cracked, stripped, or missing nut to restore a secure fit and reliable operation.

• Tightens and holds a mating connector, tube, or manifold in place
• Helps maintain a watertight connection when used with the proper seal
• Replaces worn or cross-threaded hardware that can cause leaks or loose joints
• Typical symptoms include dripping at the connection, a loose hose/manifold, or difficulty keeping the fitting tight

• Disconnect power and shut off the water supply before servicing
• Access the joint; start threads by hand to avoid cross-threading, then snug with the proper tool—do not overtighten
• Inspect any O-ring or gasket at the connection and replace if worn
• Restore water and check for leaks before reassembling panels

This sprinkler nozzle directs wash water into a focused spray inside the dishwasher for effective coverage. Replacing a clogged or damaged nozzle restores proper spray pattern and helps improve cleaning results, especially on the upper rack.

• Channels water through the sprinkler assembly for targeted spray coverage
• Maintains the correct spray pattern and pressure for thorough washing
• Replace if clogged with mineral deposits, cracked, loose, or missing
• Symptoms can include poor cleaning, weak/uneven spray, or the upper rack not getting clean

• Disconnect power and water supply before servicing; allow the tub to cool
• Pull out the rack to access the sprinkler area; remove the old nozzle (snap or twist fit varies by model)
• Clean mating surfaces and install the new nozzle securely, ensuring proper alignment
• Run a short test cycle to verify normal spray operation

The Spray Arm Connector Assembly is an OEM replacement part for GE dishwashers. This assembly connects the upper and lower spray arms to the water inlet valve, allowing water to flow through the spray arms during the wash cycle. 

Symptoms of a bad spray arm connector assembly include: 

• Uneven or inconsistent water coverage on dishes
• Clogged or kinked spray arm assemblies 
• Leaks at the tub connections
• Reduced water pressure impact 

Causes of a bad spray arm connector assembly can be mineral buildup affecting water flow, cracked or damaged connectors, or wear over time.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Pressure switch that monitors water level and signals the washer control board when to start or stop filling. Replacing a failing pressure switch can help restore correct fill levels and normal cycle operation. What it does:

• Senses air pressure from the tub and tells the control when the correct water level is reached
• Stops the fill valve once the desired level is detected to prevent overfilling
• Can cause underfilling, overfilling, or failure to advance cycles when faulty
• Works with the washer's control system to ensure proper fill and cycle progression

• Disconnect power to the appliance before starting any repair
• Shut off water supply and relieve any trapped water before accessing components
• Carefully disconnect wiring harness and air tube; note routing for reassembly

A replacement screw used to fasten internal or external appliance components, restoring secure mounting and eliminating movement. Simple, direct replacement for a single mounting point when the original screw is missing, stripped, or damaged. What it does:

• Secures panels, brackets, or components to prevent vibration and rattling during operation
• Restores proper alignment and stability to assemblies that have a loose or missing fastener
• Helps maintain safety by keeping covers and guards firmly in place
• Common symptom: loose panels, squeaks, or parts shifting during use

• Disconnect power and water before inspecting or working on the appliance
• Use the correct driver or bit to avoid stripping the head
• Thread carefully and tighten until snug; do not overtighten to prevent stripping or damage

This right-side refrigerator door hinge assembly includes the mounting screws needed to secure and pivot the door. It restores proper door support and alignment for smooth opening and closing. What it does:

• Replaces a worn or damaged right hinge to stop door sag and misalignment
• Restores a stable pivot point so the door seals and closes consistently
• Helps eliminate rubbing, scraping, or uneven gaps around the door
• Works with factory door hardware to maintain correct door movement

• Disconnect power to the appliance and empty or support the door before removing hardware
• Use appropriate hand tools and support the door while swapping the hinge to prevent drop or damage
• Tighten screws securely but avoid over-torquing metal-to-metal fasteners
• Adjust if needed per manufacturer instructions

This spring washer provides a tensioning/retaining function to keep fasteners and components secured under vibration and movement. It helps maintain proper assembly alignment and reduces the chance of parts working loose over time. What it does:

• Applies spring tension to fasteners to prevent loosening from vibration
• Helps keep assemblies aligned and components seated correctly
• Can reduce rattling, vibration noise, and intermittent contact caused by loose parts
• Restores proper clamping force when worn or damaged washers allow play

• One spring washer

• Disconnect power to the appliance before beginning any repair
• Use appropriate tools to remove fasteners and note component orientation
• Replace only with the exact part number to ensure correct fit and function