Gldt690tbb-00 Parts

This spray arm support block secures the dishwasher's lower spray arm to the tub so the arm can rotate freely and spray dishes evenly. Replaces a worn or broken support to restore proper spray-arm positioning and rotation. What it does:

• Holds the lower spray arm in place and allows smooth rotation during cycles
• Prevents wobbling, binding, or misalignment of the spray arm that can reduce cleaning performance
• Helps stop spray-arm contact with the tub that can cause noise or uneven spray pattern
• Durable plastic piece designed to withstand normal dishwasher conditions

• One spray arm support block

• Disconnect power and turn off water supply before starting any repair
• Remove the bottom rack and lower spray arm to access the support block
• Snap the new block into the tub mounting point, reinstall the spray arm, and confirm it spins freely
• If the spray arm or mounting post is damaged, inspect and replace additional parts as needed

This is a black handle assembly designed to replace a worn or broken appliance door handle and restore a secure grip and clean appearance. It matches OEM fit and restores normal door operation when the original handle is damaged. What it does:

• Replaces a cracked, loose, or missing door handle to allow safe opening and closing
• Restores original grabbing surface and leverage for everyday use
• Helps eliminate rattling or misalignment caused by a broken handle
• Matches the appliance's original finish for a consistent look

• One black handle assembly

• High-level swap: remove fasteners or retainers holding the old handle, align new handle, and secure with original screws or clips
• Use basic hand tools; avoid over-tightening fasteners to prevent cracking the new handle
• Disconnect power and keep the door supported when removing a handle that requires door disassembly

This left-side hinge assembly secures and supports a refrigerator door so it opens and closes smoothly. Replacing a worn or damaged hinge restores proper door alignment and helps the seal close fully. What it does:

• Supports the refrigerator door and keeps it aligned on the cabinet
• Provides the pivot point that allows the door to open and close smoothly
• Helps prevent door sag, rubbing, or binding when the hinge is worn or damaged
• Reduces stress on the door seal to maintain proper cabinet temperature

• One left-side hinge assembly and its mounting screws

• Disconnect power and remove food from door shelves before starting; support the door to prevent drop or damage
• Use appropriate hand tools; keep fasteners tight but avoid over-torquing
• Check door alignment and gasket contact after installation; adjust as needed per your service manual

This replacement pressure switch hose routes air/suction from the wash tub to the pressure/water-level switch so the machine can detect fill level and run correctly. It restores reliable pressure signal transfer when the original hose is cracked, split, or blocked. What it does:

• Transfers air pressure from the tub to the pressure/water-level switch so the control senses water level
• Helps prevent overfilling or incorrect fill-level detection caused by leaks or clogs in the hose
• Can resolve symptoms like inconsistent fills, washer not completing cycles, or erratic water-level sensing
• Replaces brittle, collapsed, or hardened tubing that no longer seals

• Disconnect power and water before starting any repair; follow all safety guidance for your appliance
• Inspect hose routing and orientation, then slip new hose onto the same fittings with a secure, snug fit
• Replace any damaged clamps or connectors and avoid kinked or pinched hose routing

This fill hose delivers water from the washer inlet valve to the tub, restoring proper water flow and preventing leaks. Replace a cracked, split, or leaking hose to stop water damage and restore normal fill operation. What it does:

• Carries incoming water from the inlet valve to the washer tub during fill cycles
• Stops leaks and water spraying when the original hose is cracked, swollen, or split
• Helps restore normal water fill levels and cycle performance when the hose is failing
• Fits where a direct OEM replacement hose is required for proper seal and routing

• One fill hose

• Turn off water supply and unplug the appliance before starting work
• Inspect inlet valve fittings and hose ends; replace clamps or fittings if worn
• Hand-tighten fittings, then snug with tools—do not overtighten to avoid damage
• Check for leaks after restoring water and power; recheck fittings after a test cycle

This cup rack is an upper-rack shelf designed to hold cups and glasses securely during the wash cycle, helping prevent tipping and improving cleaning coverage. It replaces damaged or missing cup supports to restore rack functionality. What it does:

• Provides stable supports for cups, glasses and small drinkware on the dishwasher's upper rack
• Keeps items spaced to allow water and detergent flow for better cleaning
• Prevents cups from tipping or shifting during a cycle
• Replaces chipped, bent, or broken cup supports that can cause scratching or poor cleaning

• Disconnect power and follow dishwasher manufacturer safety recommendations before servicing
• Remove the upper rack and align the cup rack mounting points with the upper-rack rails
• Snap or slide the cup rack into place until it seats securely; verify it does not interfere with rack movement
• Inspect rack coating and supports for damage; replace if any broken or sharp edges are present

This outer door is the stainless-steel front panel that restores the appliance's exterior appearance and provides the finished surface for the door assembly. It replaces a dented, scratched or corroded outer door to improve aesthetics and protection. What it does:

• Serves as the exterior front panel for the door assembly, giving the appliance its finished look
• Protects internal door components from impact, moisture and everyday wear
• Restores a clean, stainless-steel appearance when the original panel is dented, scratched or corroded
• Helps the door seal and latch components sit correctly by providing the correct outer structure

• One outer door panel (stainless steel, type 304) as shown

• Installation requires removing the existing door panel and may need basic hand tools; follow the appliance's service instructions
• Support the door assembly while removing fasteners to prevent dropping or bending the panel
• Disconnect power to the appliance before servicing to avoid electrical hazards
• If any clips, foam seals or trim pieces are damaged, replace them to ensure proper fit and finish