Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix a burner that won't ignite or has a weak flame. This burner head replacement solves low flame and ignition issues on gas cooktops and ranges.
I decided to replace the whole orifice instead of just the 'spark plug'. In doing so it became apparent that the screws would not come off easily and so I purchased a couple of those to make sure I had enough just in case. Good thing, 2 were messed up taking them out. It was also pretty dirty after 13 years of cooking so I took the time to clean up most of the bits. It was a difficult thing to do and took me a while to get thru all the screws in correct order to remove the part and... Read more
Secures the gas orifice beneath your cooktop and routes gas to the burner head. Replace if cracked, damaged, or missing to restore proper alignment.
Replaced damaged burners and all screws using anti-seize. Also I found that a couple of the gas lines had seized in the nuts, so I replaced the lines with 1/8" copper tube and new compression fittings. Read more
Fix burner ignition problems or weak flames with this cooktop gas burner orifice holder. Channels gas from valve to burner head for reliable performance.
Replace the burner assembly due to igniter not sparking properly Read more
Color: Black. This large cap measures about 3 inches in diameter. For gray order WP3191905. For the small cap order WP3191898.
Ordered burner caps from appliance parts pro good price fast delivery time great customer service easy install less than five minutes will use this parts supply company again. Read more
If your cooktop burner won't ignite reliably or flame is uneven, a damaged orifice holder may be the cause. This part directs gas flow to the burner head.
My stove is probably 15 years old and when I was removing the screws that hold the burner in place on top of the stove top, both of them broke off so I had to replace the entire assembly. APP had all the parts I needed and were helpful on the phone. However when I was attempting to loosen the gas line to the burner the tubing wouldn't release from the brass nut and the tubing twisted too much. Even though it didn't appear broken I wasn't comfortable knowing the metal was surely weakened so I... Read more
Color: black. Measures about 1-1/2 inches in diameter.
Ordered new knob from you and replaced it. Hey I have a question. Does this same oven knob come in white? White is what I really wanted. Based on what I saw you only have it in black. Is that correct? Read more
Medium. Color: Black. Measures about 2-1/2 inches in diameter.
LP conversion kit with 7 spud orifices for converting gas cooktop from natural gas to propane. Includes multiple orifice sizes for different burners.
Was an easy fix. Removing natural gas orifices, replacing them with propane orifices. Read more
Black control knob for cooktop burners. Mounts on control shaft to adjust heat settings. Replace if cracked, broken, worn, or missing for proper appearance.
Hex head sheet metal screw secures appliance panels, brackets, and trim. Replace missing, stripped, or damaged screws to keep covers firmly attached.
Fix uneven flames or weak heat on your gas range with a new burner head. Restores proper gas distribution for consistent cooking temperature.
Gas burner won't light or clicks but doesn't ignite? This electrode creates the spark to ignite gas burners. Moderate DIY repair taking about 2 hours.
Replaced the electrode for the spark ignitor on the burner. Works great now. Read more
Black burner grate for cooktops and ranges. Replaces chipped, rusted, or damaged grates. Sits over burner to support cookware. Sold individually.
Replaced with new OEM grates. Read more
This holder secures the gas orifice in place on your cooktop burner, ensuring proper gas flow and flame pattern. It maintains the correct positioning of the orifice for safe and efficient gas combustion. Replace it if burner flames are uneven, too high or low, or if the burner won't light properly.
Adhesive foam sealing strip cushions parts and closes gaps causing air leaks or vibration on cooktops. Replace to restore proper sealing. Verify fit.
After paying an appliance repairman $200 to tell me he couldn't fix my electric cooktop, one burner of which was boiling water at the lowest setting, I took to Google and Youtube to figure out what the issue was. I watched a 5 minute APP video and ordered the infinite switch from their web site immediately. The part arrived in 2 days, and it took me all of 5 minutes to fix (10 including the time to find the right breaker to turn off - box in this new house wasn't labeled correctly). Thanks APP! Read more
Color: Gray. Size: Large. Matching small cap: WP3191899. Color options: Black WP3191904.
Took down model# and tried to match on website. However there were 5 sub-models. Had to look very carefully at the pictures of the parts. Also, there were 3 different size caps on the range. Ordered one small, 2 medium, and one large. Arrived in 48 hours. Perfect match. Placed on burners. Repair complete. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.