Gltf2940fs2 Frigidaire Front Loading Washer Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 134816400
$1.48
- Compare At:
-
$1.63
- You Save:
-
$0.15
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134876501
This small plastic retainer clip secures trim and lightweight components so doors and shelves stay aligned and rattle-free. A simple replacement that restores proper fit where a broken or missing clip lets parts shift. What it does
- Fastens and aligns lightweight plastic trim, door, or shelf components
- Prevents movement and noise caused by a cracked or missing retainer
- Restores secure fit for loose or sagging trim pieces
- Commonly used where a push-in or snap-in fastener is required
What's included
Install notes
- Inspect the mating slots or holes for damage before installing the new clip
- Push the clip into place until it snaps; the attached part seats securely
- No special tools typically required; use a flat tool to remove the old clip if needed
- Disconnect power only when working near electrical components or lighting assemblies
More
$13.44
- Compare At:
-
$13.59
- You Save:
-
$0.15
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134994200
A small OEM fastener used to secure appliance panels and trim for a clean, stable fit. Replaces a worn or missing retainer to prevent rattling and keep exterior parts aligned for normal operation and appearance. What it does:
- Secures panels, trim, or small components to the appliance frame
- Helps prevent vibration noise and loose or sagging panels
- Restores proper alignment of exterior pieces after repair or removal
- Useful when a broken or missing retainer causes rattling or gaps
What's included: Fastener Install notes:
- Typical installation requires basic hand tools; tighten until snug—do not overtighten
- Turn off power to the appliance before accessing interior components when required
- Keep small parts away from children and pets during repair
More
$8.70
- Compare At:
-
$10.35
- You Save:
-
$1.65
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 137021600
$12.42
- Compare At:
-
$12.55
- You Save:
-
$0.13
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134051003
The Drive Belt is an OEM part for Frigidaire washing machines. This part transfers the rotational force from the motor to the drum, enabling the tumbling action during wash cycles.
Causes of a bad Drive Belt include wear and tear over time, exposure to excessive heat or moisture, or physical damage from improper installation or foreign objects.
Symptoms of a faulty Drive Belt include:
- Loud squeaking or grinding noises during the wash cycle
- The drum not spinning or rotating properly
- Slipping or failure to agitate during wash cycles
- Excessive vibrations or shaking from the washer
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
No error codes; just lots of noise and movement James S. • Winchester , TN • April 29, 2023
After a few days of our 16 YO Frigidaire Affinity front-loading washer (model ATF7000EG0) dancing around the room bellowing like an elephant in musth, I decided to fix it. Well, technically, my wife decided I would fix it. I postulated that the OEM tub suspension system was rapidly deteriorating, so I ordered the shock absorber kit (5304485917), three nylon pins (131268300), two suspension springs (134362800), and a new drive belt (134051003) for good measure. These parts all arrived in...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134472202
The Door Handle is an OEM replacement part for Frigidaire washing machines and dryers. As the component used to open and close the washer or dryer door, the handle plays an essential role in user access and operation.
Causes of a bad handle include broken or cracked plastic due to excessive force or repeated slamming of the door, as well as normal wear and tear over extended use. Failures in the handle's attachment hardware or mechanism used to interface with the door's lock can also occur.
Symptoms of a bad handle include:
- The handle breaking off the door entirely
- Difficulty turning or rotating the handle
- The handle hanging loose and not engaging the door lock
- Sharp or rough plastic edges presenting a safety hazard
This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
This part fixes the following symptoms
-
Lid or door will not open
See more...
Do-It-Yourself Stories from Customers like You
Broken handle Wayne D. • Glendale , AZ • January 10, 2015
Replaced with new handle, about five minutes.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137518800
Do-It-Yourself Stories from Customers like You
Wouldn't spin at first then no activity at all e23 code Levi G. • Wytheville , VA • March 06, 2017
We had a power surge that tripped the washer breaker. It showed an E23 error code so I replaced the main control board (part number AP4362398.) All washer activity back to normal except it still wouldn't spin and still had E23 code. I removed the tub to pump hose (part number AP3837322) to find all sorts of goodies inside such as underwires from bras, a quarter, nickel, penny, and dime stacked perfectly on top of each other inside the filter, and tangled yarn from a rug. Ended up replacing the...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134347700
Do-It-Yourself Stories from Customers like You
My firgidaire front loader dryer had a code and won't work Stanley N. • Longwood , FL • June 03, 2017
THANKS TO Wendy and Hannah both were extremely helpful with this order. I receive the video from Hannah to see what the code meant and the parts (Wendy help my to get) were exactly perfect in completing my problem with my dryer. Wendy said 1 to 3 business to receive the control board and she was right. The dryer is working just great now. Thanks for all the help, I will be using your company again when the need arising again. I will tell any who will listen to me how great you are!.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304506264
Includes: pulley and pulley bolt.
Do-It-Yourself Stories from Customers like You
F2 E0 James E. • Sidney , MT • November 07, 2017
Replaced heating element and limits.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134471500
Genuine Frigidaire part
By: Frigidaire
Part Number: 137104600
Genuine Frigidaire part
By: Frigidaire
Part Number: 134522100
Do-It-Yourself Stories from Customers like You
The door on my 10 year old Frigidaire washer rusted and warped such that we couldn't close the door Deborah R. • Madera , CA • September 22, 2017
I was willing to buy a new washing machine but, t found that I could not find an undercounter model that would fit in the space without major remodeling.
I was able to find the exact hinges, screws, handle that I needed to repair the washer.
At Appliance Parts Pros, I believe I can find all the parts needed to keep this old Frigidaire running like new indefinitely.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137105900
Do-It-Yourself Stories from Customers like You
Spider supporting drum was broken James S. • Passumpsic , VT • August 03, 2015
Follow instructions on internet. The only issue was the flat head allen drive screw securing the belt pulley to the shaft. Rounded the allen drive and wrench. Drilled two holes on opposite sides of allen drive hole. Elongated to make a long slot. Used impact driver to remove screw.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134349400
Genuine Frigidaire part
By: Frigidaire
Part Number: 134362200
Genuine Frigidaire part
By: Frigidaire
Part Number: 134372100
Do-It-Yourself Stories from Customers like You
Would not go through rinse cycle Donald S. • Cloudcroft , NM • July 31, 2015
Replaced the water valve assembly. did not really need the dispenser part. problem mainly caused by hard water buildup where the hose connects. also replaced the hoses as they also had some hard water buildup.
Read more
More