Gne27jymfs Parts

This dispenser internal assembly replaces the internal housing that supports the dispenser controls, lever, and water/ice passage—restoring proper dispensing and preventing leaks or stuck levers. Fits refrigerator dispenser systems that use this OEM assembly. What it does

• Provides the internal housing and guide for the dispenser lever, actuator, and water/ice pathway
• Secures switches and valves used to control water or ice dispensing
• Helps prevent leaks by aligning water passages and seals
• Restores proper lever action when the dispenser is jammed, loose, or misaligned
• Addresses symptoms such as no water/ice dispense, stuck or loose dispenser lever, or visible leaks from the dispenser area

• One dispenser internal assembly

• Disconnect power and shut off the water supply before beginning repair
• Handle plastic components gently to avoid cracking; keep fasteners and small parts organized
• Some models require removing the inner door panel or control module to access this assembly

This right-side freezer slide holder secures and guides the sliding shelf or basket so it moves smoothly and stays supported. Replaces a cracked or worn holder to restore proper shelf alignment and prevent sagging or jamming. What it does:

• Supports the freezer shelf/basket on the right side and keeps it aligned during sliding
• Guides the shelf so it opens and closes smoothly without catching or tilting
• Prevents the shelf from sagging, falling, or coming off the track when loaded
• Helps reduce noise caused by a loose or damaged support

• One right-side freezer slide holder

• Designed for drop-in or snap-in replacement; remove shelf/basket first to access holder
• Inspect the mating track and left-side holder for wear; replace any damaged components
• Use gentle pressure to snap new holder into place; avoid forcing metal parts to prevent breakage
• Unplug appliance or turn off power before working near electrical components or lights

This is a 10-32 machine-thread screw used to secure appliance panels, trim, and components. It replaces missing or damaged fasteners so parts fit tightly and operate without rattles or misalignment. What it does:

• Fastens panels, brackets, or assemblies that use a 10-32 machine screw
• Restores secure mounting where a stripped, missing, or corroded screw causes looseness
• Helps eliminate vibration noise or gaps caused by loose hardware
• Matches OEM thread size and length for correct fit in designated mounting holes

• One 10-32 x 5/16 machine screw

• Disconnect power and remove power source or batteries before servicing appliances
• Use the correct screwdriver or nut driver to avoid stripping the head
• Thread carefully; do not force or overtighten to prevent thread damage
• Replace any damaged mating hardware or clipped inserts for a secure repair

A replacement Phillips flat-head screw sized 10-14 x 3/4 inch for appliance assembly and panel fastening. Replaces worn or missing fastening hardware to keep panels, brackets, and components secure and aligned. What it does:

• Secures panels, trim, brackets, and internal components where a 10-14 x 3/4" Phillips flat-head screw is required.
• Restores proper fit and prevents rattling, vibration, or gaps caused by missing or stripped screws.
• Provides a direct hardware match for repairs calling for this screw size and head style.

• Disconnect power to the appliance before starting any repair work.
• Use the correct size Phillips screwdriver to avoid stripping the screw head.
• Tighten until snug; avoid over-tightening which can strip threads or crack panels.
• Replace any corroded or damaged mating hardware to ensure a secure fit.

This striker top mullion replaces the top striker piece that the refrigerator door latch catches on, restoring proper door engagement and a tight seal. Useful when the striker is worn, damaged, or misaligned. What it does

• Provides the mating strike surface for the door latch so the door stays securely closed.
• Helps maintain an even door seal to reduce cold-air leaks and temperature loss.
• Stops door misalignment or rattling caused by a worn or broken striker.
• Compatible with standard mullion assemblies that use a separate top striker piece.

• One striker top mullion.

• Disconnect power and remove food from the door area before starting work.
• Inspect the surrounding mullion and latch for wear; replace damaged components as needed.
• Handle edges carefully; mounting screws or clips may be required.

This is a replacement screw used to secure appliance components and panels so parts stay properly attached for safe operation. It's a direct-fit fastener matching OEM form and function. What it does

• Secures panels, trim, or internal components to prevent rattling or gaps
• Restores factory attachment where a screw is missing or stripped
• Helps maintain proper alignment of housing and service access
• Suitable when repair requires original-fit fasteners

• Disconnect power or unplug the appliance before servicing to avoid shock
• Use the matching screwdriver or bit to avoid stripping the head
• Thread carefully and avoid overtightening to prevent damage to threads or plastic parts
• Keep removed screws organized; replace only the screws that match the original locations

This sound damper cushions the refrigerator compressor to reduce vibration and minimize noise for quieter operation. It helps protect the compressor from metal-on-metal contact and dampens normal operating sounds. What it does:

• Cushions compressor mounting to absorb vibration and reduce noise
• Prevents metal-on-metal contact that can cause rattling or buzzing
• Helps stabilize the compressor to reduce wear from vibration
• Commonly used when compressor noise, rattling, or increased vibration is noticed

• One sound damper

• Always disconnect power to the appliance before beginning any repair
• Access the compressor area (rear lower cabinet); remove any panels as needed
• Remove the old damper and press the replacement onto the compressor mounting foot until fully seated
• If mounting hardware is damaged or the compressor mount appears worn, replace mounting parts.

The Fastener Handle Assembly is an OEM part for GE refrigerators, specifically designed to securely attach the refrigerator or freezer handle to the door. This assembly includes the necessary components, such as screws or bolts, brackets, and possibly end caps, depending on the design, to ensure a sturdy and durable connection between the handle and the door. 

Causes for a Fastener Handle Assembly to fail include normal wear and tear from repeated use, excessive force applied to the handle, or corrosion of metal parts due to moisture and refrigeration environment.  

Symptoms of a bad Fastener Handle Assembly include:

• A loose handle that moves or wobbles when touched or used.
• Difficulty in opening the refrigerator or freezer door due to a compromised handle attachment.
• Visible damage or wear to the components of the fastener assembly 

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This vegetable drawer is the produce bin for the refrigerator's fresh-food section. It organizes fruits and vegetables and, when used with the crisper cover, helps maintain the proper environment while restoring smooth, reliable storage if the original is damaged. What it does:

• Holds fruits and vegetables in the fresh-food compartment and rides on the crisper rails
• Helps manage humidity for produce when paired with the crisper cover/control
• Replaces a cracked, warped, stained, or missing drawer
• Restores proper fit so the drawer opens and closes smoothly without derailing

• One vegetable drawer (bin)

• Remove contents, then pull the old drawer forward and lift the front slightly to clear the rails
• If needed, remove the crisper cover/shelf for access; follow your model's instructions
• Align the new drawer with the slides and push straight in until fully seated
• Handle plastic carefully and avoid overloading to prevent damage

The Gear Pinion is an OEM component specifically designed for GE French door refrigerators. This part is responsible for the smooth operation of door hinges and closing mechanisms. 

The gear pinion works together with other inner door components to evenly distribute strength across the refrigerator’s motion system. This ensures doors move fluidly and stay securely sealed when closed. 

Causes of a bad gear pinion can include wear from repetitive use over many years, stress from overloading the doors, or misalignment of connecting mechanisms.

Symptoms of a bad gear pinion include: 

• Doors not closing or latching properly
• Binding or sticking movement  
• Noise or vibration when opening/closing
• Increased effort required to operate doors

Note: Right-hand side

Replace this precision gear with a genuine GE OEM part to restore dependable door functionality. This product is also compatible with Hotpoint, RCA, and Kenmore refrigerator models.
 

The Center Hinge is an OEM part for GE refrigerators. It is responsible for connecting and supporting the refrigerator doors, allowing them to open and close smoothly.

A bad center hinge can be caused by wear and tear over time, excessive weight or force applied to the doors, or damage due to accidental impact or mishandling.

Symptoms of a bad center hinge include:

• Difficulty in opening or closing the refrigerator doors.
• Squeaking or grinding noises when opening or closing the doors.
• The doors not staying securely closed.
• Uneven alignment of the doors.

Replace your worn-out or damaged center hinge with this genuine OEM part. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This light housing replaces a cracked or damaged interior refrigerator lamp housing to securely mount the bulb and protect wiring. It restores proper light coverage and keeps the lamp area sealed from debris and moisture. What it does:

• Secures and protects the interior lamp and lens assembly.
• Replaces cracked, broken, or yellowed housings that expose the bulb or wiring.
• Helps prevent the bulb from rattling or shifting inside the cabinet.
• Improves light diffusion for more even interior illumination.

• Disconnect power to the appliance before starting — remove the plug or switch off the breaker.
• Allow the bulb to cool and remove shelves or bins as needed for access.
• Remove fasteners or clips holding the old housing, save any reusable screws, and handle the bulb and lens carefully.
• Test the lamp after installation; check the bulb and door switch separately.

This 12-24 screw secures brackets, panels, and other hardware in GE refrigerator assemblies. Replacing a stripped or missing fastener restores a tight, rattle-free fit and helps keep doors, handles, and internal components properly aligned.

• Fastens components where a #12-24 screw is specified
• Replaces damaged, stripped, corroded, or missing hardware
• Helps resolve loose handles/panels, vibration noises, or minor misalignment caused by missing screws
• OEM-grade hardware for a precise fit in the designated locations

• Disconnect power; turn off water supply if working near water lines
• Match the new screw to the original; start threads by hand to avoid cross-threading
• Support the part being secured (door/handle/panel) during removal and installation
• Use the correct driver/bit that matches the screw head; tighten snugly without overtightening

The Door Closure Spring is an OEM replacement part for GE refrigerators. This spring ensures that the refrigerator door closes securely and maintains a tight seal, preserving the freshness of your food and preventing energy loss. The door closure spring provides the necessary tension to keep the refrigerator door properly aligned and closed. It helps to prevent air leaks and maintain consistent temperature levels inside the refrigerator.

A bad door closure spring can occur due to wear and tear over time or accidental damage. If you notice symptoms such as a loose or sagging refrigerator door, difficulty in keeping the door closed, or a compromised seal, it may be time to replace the door closure spring.

Symptoms of a bad door closure spring include:

• Loose or sagging refrigerator door
• Difficulty in keeping the door closed
• Compromised seal resulting in temperature fluctuations

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Drier is an OEM component specifically designed for GE combination refrigerator-freezers. Absorbing moisture, its treated silica particles buffer humidity within refrigerant lines. Proper drying sustains energy-efficient performance while preventing corrosion.

Causes of a faulty drier commonly relate to saturation reducing capacity. As desiccant degrades, water passes into closed system compressors requiring change. 

Symptoms of a bad drier involve:

• Frost and ice buildup impairing cooling  
• Puddling around evaporator evidencing leaks
• Higher operating costs from impaired efficiency

Causes of a bad drier involve typical saturation shortening drying cycles. Cracks release desiccant particles risking blockages necessitating timely replacement.

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire combination units. Replace to retain steady humidity management protecting components and maximizing freshness years of operation.
 

This condenser fan and housing assembly circulates air across the condenser coils to help your refrigerator dissipate heat and run efficiently. Replaces a damaged or worn housing and fan to restore proper airflow and cooling performance. What it does

• Moves air over condenser coils so the compressor can shed heat and maintain cooling
• Prevents overheating and helps the system run more efficiently
• Can stop loud fan noise, rattling, or reduced cooling when the fan or housing is damaged
• Restores correct airflow when the original housing is cracked, bent, or obstructed

• One condenser fan and housing assembly

• Disconnect power to the appliance before starting any repair
• Access may require removing rear or bottom access panels; keep track of fasteners
• Handle sheet metal edges and fan blades carefully to avoid cuts and damage
• After installation, verify fan spins freely and recheck connections; confirm proper cooling