Gsd4000 Parts

This 10-32 hex head screw secures appliance panels and components where a small machine screw is required. It provides a durable, threaded fastening point for repair or reassembly. What it does:

• Fastens panels, brackets, and small components using a 10-32 machine thread
• Hex head accepts a 7/16" socket or wrench for positive torque application
• Replaces worn or damaged screws that cause loose or rattling parts
• Compatible with common metal-to-metal and tapped-hole connections

• One 10-32 hex head screw with 7/16" socket head

• Use the correct 7/16" socket or wrench to avoid rounding the head
• Thread engagement should match the appliance's threaded insert; do not force if resistance is felt
• Follow manufacturer service manual for torque specs and installation sequence
• Disconnect power and follow safety procedures before servicing the appliance

This genuine replacement fill hose routes incoming water from the inlet valve to the dishwasher tub, restoring proper water delivery for washing cycles. Replaces worn or cracked hoses to help stop leaks and ensure reliable fill performance. What it does:

• Carries water from the inlet valve to the dishwasher tub during fill cycles
• Restores proper water flow when original hose is leaking, split, or clogged
• Helps prevent water damage caused by deteriorated or cracked hose sections
• Works with the dishwasher's fill and wash functions to maintain normal operation

• Disconnect power and shut off the household water supply before starting
• Inspect clamps, grommets, and fittings and replace if damaged
• Route hose without kinks and secure with proper clamps to avoid leaks

This seal cap fits the washer tower to help seal the upper tower area and keep water contained during operation. It prevents leaks and helps maintain proper washer function at the tower interface. What it does:

• Provides a watertight seal where the upper tower meets the tub/tower assembly
• Helps stop leaks and moisture migration around the tower area
• Supports normal water flow and prevents damage from seepage
• Commonly replaced when the tower area shows signs of dampness or visible wear

• One seal cap (upper tower)

• Designed for direct replacement;
• Turn off power and water supply before beginning any repairs
• Inspect surrounding seals and tower components for wear during replacement

Size: 8-32 x 5/16 inch.

This SCR 8-18 silicon-controlled rectifier replaces the control semiconductor that switches and regulates power to heating or motor circuits in compatible appliances, restoring proper power delivery and control. It's a direct-fit electrical replacement part. What it does

• Acts as a switching device on control boards to allow or block current flow when signaled.
• Regulates power delivered to heating elements or motor circuits to enable proper operation.
• Commonly linked to symptoms like no heat or intermittent heating, motors that won't start, or erratic control-board behavior.
• Helps restore reliable on/off control when a failed SCR is causing open or shorted conditions.

• One SCR 8-18 silicon-controlled rectifier (WD02X10160).

• Always disconnect power before servicing the appliance to avoid shock.
• Handle the part carefully; avoid touching leads and use anti-static precautions if available.
• Inspect surrounding connectors and wiring for damage; replace any corroded terminals.

Replacement bracket that secures the flood/leak detection switch inside the appliance, keeping the switch positioned to sense unwanted water and help the leak-detection system work as intended. What it does:

• Holds the flood/leak switch in the correct position so it can detect water accumulation.
• Ensures consistent switch activation when water pools under the cabinet or base pan.
• Common repair when you find water under the appliance, persistent leaks, or when leak detection isn't responding.
• Simple, passive mounting part—no electrical function.

• Disconnect power and shut off the water supply before accessing the appliance.
• Remove the appropriate access panels to reach the bracket location; note orientation of the switch before removing.
• Reinstall bracket using the original fasteners or equivalent screws; keep parts organized during disassembly.
• Restore power/water and test the appliance for proper leak-detection operation after reassembly.

This hose clamp secures a washer or dryer hose connection to help prevent leaks and keep hoses firmly attached during operation. It's a simple replacement for worn or loose hose fasteners. What it does:

• Holds inlet or drain hose to the appliance fitting to reduce slipping and leaks
• Restores a tight seal at hose connection points that may be leaking or wobbling
• Keeps hoses positioned correctly during fill and drain cycles
• Useful when clamp is rusted, stretched, or no longer grips reliably

• One hose clamp

• Disconnect power and turn off the water supply before replacing the clamp
• Slide clamp onto hose, position over the fitting, then compress or tighten per clamp type (use pliers or screwdriver as required)
• Inspect the hose and fitting; replace the hose if cracked or damaged
• Test for leaks after restoring power and water

A stainless steel hex-washer-head screw used to secure panels and components on compatible appliances. Corrosion-resistant construction helps maintain a secure fit where short, strong fasteners are required. What it does

• Fastens appliance panels, trim, or brackets where an 8-18 thread and short 3/8" length are specified
• Hex washer head provides a larger bearing surface to reduce pull-through
• Stainless finish resists rust in humid appliance areas
• Common replacement when original mounting screw is stripped, missing, or corroded

• One stainless steel hex-washer-head screw

• Use the correct 8-18 thread fastener and do not force mismatched screws to avoid thread damage
• Tighten securely but avoid overtightening to prevent stripped threads or cracked panels
• Power tools may be used with appropriate bit, but start by hand to ensure proper alignment
• If installing near electrical components, disconnect power before servicing

A 10-24 x 1/2 thread-forming screw used to fasten panels and small components in appliances. Replaces missing or damaged fasteners to restore secure mounting and reduce rattling or misalignment. What it does:

• Secures panels, brackets, or trim to prevent movement and vibration
• Replaces missing, stripped, or damaged screws that allow parts to loosen
• Helps maintain proper alignment of doors and access panels
• Small, general-purpose fastener for a variety of appliance interior and exterior attachments

• Disconnect power to the appliance before beginning any repair
• Use the correct driver bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent thread damage
• Compare the old screw to length and thread before installing

This is a stainless steel hex washer-head screw used to fasten and secure components. Its integrated washer head provides a broad bearing surface for a tight, durable hold in appliance assemblies.

• Secures panels, brackets, and hardware to prevent looseness and vibration
• Restores proper fastening when originals are stripped, missing, or corroded
• Stainless construction helps resist rust in moisture-prone areas
• Common symptoms of a needed replacement include rattling, loose panels, or missing hardware

• Disconnect power and, if applicable, shut off water before servicing
• Use the correct nut driver or socket for the hex head to avoid stripping
• Replace any damaged or missing fasteners in matched pairs or sets for even clamping
• Do not overtighten; snug to manufacturer torque guidance when available

This is the mechanism S/S assembly used to control the appliance's mechanical functions and restore proper operation. Replacing a worn or broken mechanism helps resolve intermittent or failed mechanical actions and audible clicking. What it does:

• Transfers user input into mechanical movement to operate the appliance's internal components
• Engages and releases internal linkages for door, latch, or control actions
• Restores consistent mechanical response when original mechanism is worn, stuck, or broken
• Can stop symptoms like inconsistent operation, failure to engage, or unusual noises during cycles

• One mechanism S/S assembly

• Replace only with the exact OEM part number
• Disconnect power (and water, if applicable) before attempting any repair
• Handle small components carefully; keep screws and clips organized for reassembly

Size: 8-32 x 5/8 inch.

A replacement knob latch handle that secures and indexes the appliance control knob for reliable selection and tactile feedback. Restores proper knob engagement to help prevent slipping or incomplete setting changes. What it does:

• Latches and holds the control knob in selected positions so settings stay engaged.
• Provides tactile detents for clear position feedback when turning the knob.
• Commonly replaces worn, cracked, or broken latch pieces that let the knob slip or fail to engage.
• Fits directly onto the control shaft and works with the existing knob assembly.

• Disconnect power (unplug or switch off circuit) before servicing to avoid shock or injury.
• Removal typically requires removing the control knob and/or console trim to access the latch; keep track of fasteners.
• Inspect the control shaft and surrounding components for wear; replace damaged knobs or retention clips as needed.

This replacement chamber collection is the oven's inner cavity assembly that forms the cooking chamber and supports heating components. Replacing a damaged chamber restores the oven's proper enclosure for even cooking and safe operation. What it does

• Serves as the oven's inner liner and structural cavity that holds racks and heating elements
• Helps contain heat for consistent cooking temperatures
• Prevents heat and combustion byproducts from reaching external components
• Common symptom indicators: visible dents, cracks, rust or burn-through, smoke or unusual odors from the oven, or uneven cooking

• Disconnect power (and gas if applicable) before beginning work
• May require removal of the oven door, racks, and heating elements to access the cavity
• Handle carefully to avoid sharp edges; wear gloves and eye protection