Gsd4000 Parts

White. 8-18 x 5/16 inch.

This is a genuine replacement screw used to secure components and panels on compatible GE appliances. It restores proper fit and prevents rattling or loose parts for safe, reliable operation. What it does:

• Secures panels, brackets, or internal components to maintain proper alignment
• Stops rattling or vibration caused by loose fasteners
• Replaces missing, stripped, or damaged screws to restore safe operation
• Helps maintain seals and clearances by holding parts firmly in place

• Screw

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to components
• Keep removed fasteners organized to ensure correct reassembly

The Lower Dishrack is an OEM part for GE dishwashers. It provides a sturdy shelf for placing pots, pans, plates, and other dishware on the bottom level of the dishwasher interior. The lower dishrack supports dish loads, holding them securely in place during the wash cycles. 

Causes of a failing lower dishrack include long-term wear and tear, corrosion from exposure to water and detergents, damage from improper loading, and loose or broken components.

Symptoms of a bad lower dishrack:

• Difficulty sliding the rack in and out
• The rack getting stuck mid-cycle
• Broken or missing wheels/rollers
• Rust formation
• Bent or misshapen wires

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Spring Timer Lever is an OEM part for GE dishwashers. This small but crucial component works in conjunction with the control timer to advance the dishwasher through each phase of the cycle. It engages the timing mechanism using applied spring pressure to ensure programs run as specified. 

Symptoms of a bad spring timer lever include: 

• The dishwasher fails to advance through cycles properly
• Long wash cycles 
• The unit getting stuck and not progressing the wash

Causes of failure involve wear and tear over time, damage or deformation of the spring, or an inability of the lever to effectively engage the timer. 

This authentic GE replacement part helps maintain precise wash times and optimal cleaning performance. It is designed to OEM specifications for a perfect fit and direct replacement.
 

This E-Ring is a small retaining clip that snaps into a shaft groove to keep dishwasher components securely in place. Replacing a worn or missing ring restores proper fit and helps prevent parts from loosening during cycles.

• Locks a component onto a shaft/axle by engaging the groove
• Helps stop wobble, rattling, or components sliding off
• Common clue it's needed: clip is bent, broken, or missing
• Maintains alignment for smooth operation

• Disconnect power and shut off water before servicing
• Access the affected assembly and support the part being retained
• Use needle-nose pliers or a small flat-blade tool to remove/install; wear eye protection
• Ensure the ring is fully seated in the groove and the component cannot slide off

This fill funnel hose directs incoming water from the inlet to the washer tub, helping ensure proper fill and preventing water from spilling into surrounding components. It's a direct-replacement soft hose designed for OEM fit and routing. What it does

• Channels water from the inlet valve to the tub or dispenser so the washer fills correctly.
• Replaces cracked, kinked or deteriorated funnel hoses that can cause leaks or slow fills.
• Helps restore proper water flow and prevents water from contacting electrical components.
• Fits into the original routing to maintain factory water path and sealing.

• One fill funnel hose.

• Recommended for installers comfortable working with appliance water connections; disconnect power and shut off water before starting.
• Inspect inlet valve connection and clamps; replace clamps if corroded.
• Tighten clamps securely to prevent leaks, but avoid overtightening which can damage the hose.
• Run a short water-only cycle after installation to check for leaks before returning to normal use.

This bearing hinge arm replaces a worn or damaged door hinge on compatible GE laundry appliances, restoring smooth opening and secure door alignment for safe, reliable use. It provides a stable pivot point and reduces binding and noise. What it does:

• Supports the appliance door and provides a smooth pivot with an integrated bearing
• Prevents door sag and helps maintain proper door seal and alignment
• Reduces squeaks, grinding, or sticking when opening and closing the door
• Restores secure door movement after hinge wear or damage

• One bearing hinge arm

• Disconnect power and water before starting any repair
• Remove the door or access panel to reach hinge mounting hardware
• Reuse existing fasteners only if undamaged; tighten hardware securely but avoid over-torquing
• Check door alignment and operation after installation; if binding persists, inspect other hinge or strike components

This CSM module assembly is the control sub-module that manages tub functions on compatible GE top-load washers, restoring normal cycle control and communication between the console and tub components. What it does:

• Controls and coordinates tub operations including agitation, spin, and cycle sequencing
• Helps the washer register and execute user-selected wash cycles
• Addresses symptoms such as washer not starting cycles, intermittent or no agitation/spin, or error codes related to tub control
• Works with the washer's main control and sensors to ensure proper cycle timing and transitions

• 1 CSM module assembly (C-Tub)

• Disconnect power to the appliance before beginning any work to avoid electrical shock
• Access typically requires removing the washer cabinet or console; handle the module and connectors gently
• Verify connector orientation and secure all wiring before restoring power

This SCR (silicon-controlled rectifier) is a control-circuit power-regulation component that helps manage electrical flow to appliance subsystems for reliable operation and stable control response. What it does:

• Regulates power flow in an appliance's electronic control circuit for proper component operation
• Helps enable consistent motor, heater, or timing control where used on the control board
• Faulty SCRs can cause intermittent operation, failure to start, or erratic control behavior
• Replacing a damaged SCR can restore steady, predictable appliance function

• Disconnect power to the appliance before servicing to avoid shock hazard
• Handle as an electronic/ESD-sensitive component; use proper grounding and avoid static discharge
• Some installations require soldering or board-level replacement—inspect mounting and connections carefully

This timer cover is the replacement trim that surrounds and protects the dryer or washer control timer on the control panel, restoring a finished look and shielding the timer mechanism from dust and debris. What it does:

• Replaces a cracked, faded, or damaged timer trim to improve appearance and protect the underlying timer assembly
• Helps keep lint, dust, and moisture away from the timer control area
• Restores correct alignment and mounting for the timer knob and control components
• Useful when the existing cover is loose, broken, or missing

• One timer cover

• Disconnect power (unplug or switch off breaker) before starting any repair
• Remove the control panel or access bezel per your model's service instructions to reach the timer cover
• Use appropriate hand tools (screwdriver) and avoid forcing plastic tabs to prevent breakage

This left-side door arm hinge secures and guides the appliance door, restoring proper alignment and smooth opening/closing. It replaces a bent or broken hinge to reduce sagging and uneven door movement. What it does:

• Supports the door on the left side and helps control its travel and position
• Restores proper door alignment when a hinge is bent, worn, or broken
• Helps eliminate door sagging, scraping, or uneven closing
• Works with existing hinge pins and mounting points to stabilize the door

• One left-side arm hinge

• Installation requires basic hand tools; refer to your model's service manual for step-by-step instructions
• Disconnect power (and water for washers) before starting any repair
• Inspect adjacent hinge hardware and fasteners; replace if worn to ensure proper fit and function

This right-hand arm hinge secures and guides the appliance door or access panel for proper alignment and smooth operation. It replaces a worn or broken hinge to restore correct door movement and positioning. What it does:

• Attaches the door to the cabinet and provides a pivot point for opening and closing
• Keeps the door aligned to prevent sagging, gaps, or rubbing
• Restores smooth, consistent door motion when the original hinge is bent, worn, or broken
• Helps reduce stress on the door and adjacent components caused by misalignment

• Install with power disconnected and appliance stable to avoid injury
• Tighten mounting fasteners securely but avoid over-torquing to prevent damage
• If replacing both sides or multiple components, inspect companion hinge and fasteners for wear