Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This replacement timer is a genuine OEM part for a dishwasher. The timer works to regulate a dishwasher's cycles by controlling how long power is supplied to the internal components. This allows the dishwasher to have multiple wash modes and shut on or off automatically once set by the operator. The timer assembly can be located behind the kickplate in the door or at the top of the control panel. Dishwasher timers are often misdiagnosed as the problem in a faulty appliance, so be sure to test the timer before immediately replacing it. Using a multimeter, test the timer for a range of roughly 2,000 to 3,500 ohms. If the part does not give a reading within this range, it should be replaced. Disconnect the two attached wires and mark them so that they can be properly reattached during reassembly. Needle-nosed pliers are recommended for this job, as they can provide a more delicate touch than just yanking out the wires. This replacement timer is compatible with Kohler washers and comes sourced from its original manufacturer. This part does not include any additional hardware so be sure not to lose any of the screws removed during disassembly.
Replaced spray arm assembly, it's a different style than what was in the dishwasher but it's an easier style to work with. I also ordered support assembly and did not need it,spray arm assembly was all I needed. Read more
Reversible panel - white on one side, almond on the other.
We called your company and you found it. We had called several others including GE with no success. Read more
This kit fits both D style and T style shafts.
We removed the spray arm from the Spray Arm Hub and Support Assembly (GE part WD22X126) and discovered that the Check Valve (GE part WD1X5488), which prevents dirty water from flowing back into the tub, was missing completely. Replacement was very easy - the soft rubber valve pushes into position from the inside of the Support Assembly. We also found that the Plastic Thrust Washer (GE part WD3X766) inside the center of the Spray Arm Hub had eroded considerably, so we replaced that as well. Read more
Color: Chrome
The knob just popped in. For the door spring/cable assembly I removed the lower (black) kick panel that is right under the door and the springs fell out since one cable was completely broken. I replaced both cables since the other had some rust evident on it. Getting the cable assemblies on the springs was a little difficult because the spring hooks were closed against the spring. Had to use pliers to lift them a bit. Hook the cable ends to the door, then make the last spring connections... Read more
Specs: 10 - 32 t hex 7/16 s