Gsh25jsrfss25jstfss Parts
Genuine Ge part
By: Ge
Part Number: WR02X11863
Secures the condenser fan motor in position. Replace this bracket if cracked, bent, or causing excessive vibration to restore stable mounting.
More
Genuine Ge part
By: Ge
Part Number: WR02X10678
Front mounting grommet for refrigerator ice makers. Secures ice maker assembly to freezer wall. Replace if cracked, missing, or worn to restore stability.
Do-It-Yourself Stories from Customers like You
Water in door came out in reduced stream James K. • Estero , FL • December 10, 2015
Replaced the housing the water filter screws into. Water works fine now.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR32X10130
Glass insert for refrigerator pan cover, forming the flat shelf above crisper drawers. Replace cracked, broken, or missing glass to restore a stable surface.
Do-It-Yourself Stories from Customers like You
The glass shelf that sits on top of the fresh produce drawer shattered while I was cleaning it so I needed a new one Jamela F. • Tallahassee , FL • February 15, 2021
I "Binged" the refrigerator model number and Appliance Parts Pros website was one of the options to click on, so I did. Found what I needed. The diagram of the refrigerator helped too.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR86X25269
The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.
You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.
Symptoms of a bad R134 drier include:
- Reduced cooling efficiency
- Frost buildup on the evaporator coils
- Unusual noises from the refrigeration system
- Increased energy consumption
- Refrigerator not maintaining the set temperature
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
More
Genuine Ge part
By: Ge
Part Number: WR01X10606
8-18 CA HX 1/2 S
Do-It-Yourself Stories from Customers like You
Evaporator fan. James W. • Leakesville , MS • April 04, 2020
Replacement went good. The fan was perfect match. I am glad I ordered the two grommets, because the other ones were worn. I found this when dismantling. The blade was replaced as well.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR1X1367D
Includes 12 retainer rings.
Do-It-Yourself Stories from Customers like You
A fin on the plastic auger broke off and needed to be replaced John M. • Massanutten , VA • August 08, 2015
I ordered a replacement auger from AppliancePartsPros.com. Upon receipt of the new auger, I watched the repair video and took the ice crusher apart. I found several other parts that needed to be replaced as well. Once All the parts were received, I again watched the video. The video was not specific enough to show how to reassemble the ice crusher blades and the two types of washers. I found another video on YouTube that walked me through specific details of assembly and everything went...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR01X10649
This is a mounting screw used to secure various internal or external components in the refrigerator. It is a small Phillips pan-head fastener designed for use with the specific thread and length required by the appliance. Replace this screw if the original is stripped, lost, or damaged during a repair, causing a component to be loose or improperly secured.
Do-It-Yourself Stories from Customers like You
Ice maker not dispensing/frost buildup J Craig H. • Boynton Beach , FL • June 14, 2015
Replaced solenoid and flap as per instructions on site. Fast, easy and working great! Thanks
Read more
More
Genuine Ge part
By: Ge
Part Number: WR01X10652
Mounting screw for refrigerator interior components like fan brackets, ice maker assemblies, and shelving. Replace if stripped, missing, or corroded.
Do-It-Yourself Stories from Customers like You
This is the third time i have had to replace the "evaporator fan" in my ge refridgerator Leroy S. • Roseville , MN • December 07, 2014
Because I have had to replace this fan before, the process goes pretty fast.. I am impressed with AppliancePros for a number of reasons, the price for componets is always cheaper that other major parts suppliers. They go to great length to insure all ordered parts are shipped and in a timely fashion.. Also the live tutorials are a great help for the Doit yourselfer..
Read more
More
Genuine Ge part
By: Ge
Part Number: WR1X5278
Secures refrigerator wiring to prevent chafing and vibration noise. Replace when damaged or missing to keep harnesses organized. Confirm fit by model.
More
Genuine Ge part
By: Ge
Part Number: WR01X10619
10-18 hex washer screw for securing panels, trim, brackets, and components in appliances. Replaces lost, stripped, or corroded fasteners.
Do-It-Yourself Stories from Customers like You
No ice would come out dispenser Donovan L. • Atlanta , GA • July 04, 2015
The auger motor failed and wouldn't turn. I replaced the motor and it works without a problem. Make sure you dont throw away the motor boot or buy one if you don't have one. Otherwise, the temperature will freeze up the motor and lead to premature failure.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR01X10201
This top-closed thimble is a small protective plug that presses into a cabinet opening to cap and finish the hole, helping prevent abrasion and limiting air or moisture leaks for reliable appliance performance.
- Caps and seals an unused hole/opening in the liner or cabinet
- Shields edges to help protect nearby wiring or tubing from chafing
- Helps reduce drafts and moisture migration that can contribute to frost, condensation, or temperature swings
- Replace if cracked, brittle, loose, missing, or if you notice gaps or rubbing noises
What's included: 1 top-closed thimble Install notes:
- Disconnect power; if applicable, turn off the water supply
- Access the opening, remove the old thimble/plug, and clean the area
- Align and press the new thimble into the hole until fully seated and flush; avoid pinching wires or tubing
- Restore power/water and verify a snug fit
Do-It-Yourself Stories from Customers like You
Lost top hinge for freezer door while moving fridge Thomas W. • Sunbury , PA • September 20, 2016
Ordered hinge from appliance parts pros.com, received part quickly and put door back on fridge.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR02X11622
Secures the evaporator fan motor to the refrigerator cabinet. Replace if your original bracket is bent, broken, or cracked to restore proper mounting.
Do-It-Yourself Stories from Customers like You
This is the third time i have had to replace the "evaporator fan" in my ge refridgerator Leroy S. • Roseville , MN • December 07, 2014
Because I have had to replace this fan before, the process goes pretty fast.. I am impressed with AppliancePros for a number of reasons, the price for componets is always cheaper that other major parts suppliers. They go to great length to insure all ordered parts are shipped and in a timely fashion.. Also the live tutorials are a great help for the Doit yourselfer..
Read more
More
Genuine Ge part
By: Ge
Part Number: WR01X10379
Secures the hinge cover to your refrigerator door or cabinet hinge. Replace this screw if it's missing, stripped, or damaged to stop the cover from loosening.
Do-It-Yourself Stories from Customers like You
We bought a cheap refrigerator and during the move we lost a handful of the parts for the door Adam M. • Racine , WI • February 26, 2019
Found the parts on this website and installed them. I was actually quite happy since there is a diagram of the door and I could go piece-by-piece to order what I needed.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR84X10022
Refrigerator not cooling or running constantly? A damaged condenser coil prevents proper heat release. This assembly restores cooling efficiency.
More
Genuine Ge part
By: Ge
Part Number: WR02X10522
Secures water tubing to fittings in refrigerators and dishwashers. Replace if leaking, tubing slips off, or clamp is cracked. Confirm fit with model number.
Do-It-Yourself Stories from Customers like You
Broken parts needing replaced Cristy N. • Charleston , SC • March 22, 2016
When moving a "Scratch & Dent" Ref we broke the coupling on the back for the water line. We purchased new and repaired ourselves!
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X4138
Mounting spacer maintains proper clearance between refrigerator panels, doors, or components. Replace if cracked, broken, or missing to restore fit.
More