Gsh25jsrfss25jstfss Parts
Genuine Ge part
By: Ge
Part Number: WR02X10558
Secures the drain tube to prevent water pooling or dripping. Replace if the clip is cracked, broken, or the tube has come loose. Verify fit with your model.
More
Genuine Ge part
By: Ge
Part Number: WR02X10560
Secures the lower front grille or trim panel to prevent rattles and gaps. Replace when clips break or go missing for a snug, aligned fit. Verify compatibility.
More
Genuine Ge part
By: Ge
Part Number: WR02X11607
Wire tie retainer for refrigerators. Secures and organizes internal wiring. Replace if cracked, broken, or missing to keep wires properly bundled.
More
Genuine Ge part
By: Ge
Part Number: WR2X4143
Replacement pivot that supports and aligns refrigerator doors or drawers. Needed when original pivot is cracked, broken, or worn, causing misalignment.
Do-It-Yourself Stories from Customers like You
The ice maker did not crush ice Joy U. • Galveston , TX • October 02, 2016
When we inspected the first time we found that
Plactic had broken from the spiral part that for wards the ice. Also there were cracks in two places of other parts. There was a hole in the bottom of the bin. The new spiral was assembled and two new parts were replaced with help from the video and the diagram and the unit worked well. Two months later, ice maker would not forward any ice though the bin was full. We emptied the bin sand have ordered a new part or two in hopes that they will...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X9299
Closes and protects the end of your refrigerator's mullion air duct on the door jamb. Replace this cap if cracked, broken, or missing to maintain a finished appearance.
More
Genuine Ge part
By: Ge
Part Number: WR14X10044
This foam gasket seals the control housing to prevent air leaks and maintain proper temperature. Replace if worn, compressed, or causing cooling issues.
More
Genuine Ge part
By: Ge
Part Number: WR02X40305
Do-It-Yourself Stories from Customers like You
Leaking vaporizer pan Rich M. • La Verne , CA • May 04, 2019
Installed new stainless steel pan replacing broken original plastic pan and installed new rubber grommets for the compressor
Read more
More
Genuine Ge part
By: Ge
Part Number: WR14X10053
This self-adhesive foam strip provides a flexible seal and buffer for appliance gaps, helping reduce drafts, rattling, and moisture intrusion. Designed for easy stick-on replacement where foam padding or sealing is needed. What it does
- Seals small gaps between components to help reduce air leaks and temperature loss
- Cushions panels and doors to minimize noise and vibration
- Helps block moisture and dust from entering sensitive areas
- Self-adhesive backing allows for quick placement without extra glue
What's included
- One self-adhesive foam strip
Install notes
- Surface must be clean and dry; wipe with isopropyl alcohol for best adhesion
- Measure and trim the foam strip to fit—use scissors or a utility knife
- Press firmly along the length to ensure full contact; allow adhesive to set before closing doors or panels
- For safety, disconnect power to the appliance before working in internal areas
More
Genuine Ge part
By: Ge
Part Number: WR17X13124
Plastic cover that conceals and protects water supply tubing behind the lower kickplate. Replace if cracked, broken, or missing for a finished look.
More
Genuine Ge part
By: Ge
Part Number: WR02X10593
Rear condenser fan mounting bracket for refrigerators and freezers. Replaces broken, cracked, or missing brackets that secure the fan assembly.
More
Genuine Ge part
By: Ge
Part Number: WR17X11505
Protective enclosure for the ice crusher mechanism in your refrigerator's dispenser. Replace if cracked, broken, or damaged from ice jams or wear.
Do-It-Yourself Stories from Customers like You
A fin on the plastic auger broke off and needed to be replaced John M. • Massanutten , VA • August 08, 2015
I ordered a replacement auger from AppliancePartsPros.com. Upon receipt of the new auger, I watched the repair video and took the ice crusher apart. I found several other parts that needed to be replaced as well. Once All the parts were received, I again watched the video. The video was not specific enough to show how to reassemble the ice crusher blades and the two types of washers. I found another video on YouTube that walked me through specific details of assembly and everything went...
Read more
More
$53.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR72X10170
Right side
Do-It-Yourself Stories from Customers like You
The fridge support bracket broke, along with auger motor as well as microwave coupler missing! Travis H. • East Bend , NC • October 10, 2021
Replaced the support bracket for the ice bucket. Replaced the auger motor for the ice dispenser and installed the new coupler for the microwave tray to spin. Everything works great now!
Read more
More
$45.45
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR17X11449
This small guide sits at the icemaker fill area and manages the water stream. It directs incoming water into the fill cup and channels any excess safely away to help prevent splashing, leaks, and ice buildup inside the freezer.
- Guides the icemaker fill stream into the fill cup/funnel during the fill cycle
- Diverts stray or excess water to the overflow path to reduce spills
- Helps prevent leaks, sheets of ice, and clumped cubes under the icemaker
- Clues it may be needed: cracked, warped, or missing guide; water dripping from the fill area
What's included: 1 diverter overflow. Install notes:
- Disconnect power and turn off the water supply before servicing
- Remove ice bin and any covers to access the icemaker fill area
- Unclip/unscrew the old diverter; align and secure the new part to the fill cup/tube
- Restore water and power; run a test fill and check for leaks
Do-It-Yourself Stories from Customers like You
Ice delivered very slow and pieces of plastic in it Richard D. • Chandler , AZ • November 18, 2019
The diverter was broken and looked like housing also, so replaced both and now works fine
Read more
More
$22.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR14X10047
Seals the air damper opening between freezer and fresh food compartments to prevent air leaks and maintain stable temperatures. Replace if worn or cracked.
Do-It-Yourself Stories from Customers like You
GE side by side. Fridge side not cooling, freezer side working fine. Thomas H. • La Mesa , CA • May 19, 2020
Evaporator fan motor in our freezer was bad. Ordered new one with 2 day delivery and had it in 2 days. Thankfully it was very easy to get to from the front of the freezer. There are 3 different options for same motor with different wire harnesses. I bought the cheapest option and then snipped and reconnected the wires to the existing harness. That saved us $50. Still well under an hour from the time I opened the tool box to putting the last tool away.
Fridge is now plenty cold even set on 5. .
Read more
More
$6.72
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR2X7309
This solenoid saddle is a small mounting bracket that secures a refrigerator solenoid in the correct position. By preventing movement and misalignment, it helps the linked mechanism engage smoothly and consistently.
- Secures the solenoid to its housing or frame to prevent shifting
- Maintains proper alignment for reliable actuation
- A worn or broken saddle can cause buzzing/chattering and intermittent operation
- Restores stable mounting to help the connected mechanism work correctly
What's included: 1 solenoid saddle Install notes:
- Disconnect power; shut off water supply if working near water lines
- Access the solenoid assembly and note the original saddle's orientation
- Transfer the solenoid into the new saddle and reuse existing fasteners/clips
- Smooth operation before reassembling panels
Do-It-Yourself Stories from Customers like You
Ice dispenser crushing ice only no cubes Eric W. • Copper Canyon , TX • June 27, 2014
Easy fix once I found the problem. Broken solenoid sleeve. Part cost $2.58 + shipping. 10 minute repair.
Read more
More
$7.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR02X11465
Door stop plate for side-by-side refrigerators. Mounts on the door hinge to control door swing and positioning. Replace if cracked or worn.
Do-It-Yourself Stories from Customers like You
Cam worn out Michael N. • Arlington , NY • August 23, 2019
REPLACED THE CAM AND DOOR PLATE.
Read more
More
$14.65
Out Of Stock
Usually ships within 4 - 14 days