Gss25gshss Parts

This RFID cover and FCC label assembly protects the appliance's RFID module and provides the required regulatory marking. It helps keep the module secure and the label visible for compliance and service identification. What it does:

• Covers and protects the RFID module or antenna from dirt and physical contact
• Keeps the FCC/regulatory label attached and visible for compliance verification
• Helps prevent accidental damage that can affect communication or service diagnostics
• Suited for replacing a cracked, missing, or detached cover or label

• One RFID cover with attached FCC label

• Disconnect power to the appliance before servicing to avoid shock or damage
• Handle with care; this plastic cover and label are small and can be damaged by excessive force
• Reinstall using the original clips or fasteners; do not force into place
• If the RFID module or nearby electronics are exposed, avoid static discharge—use a grounding strap if available

This pivot is the replacement pivot piece that supports and guides a refrigerator door or sliding drawer, restoring proper alignment for smooth opening and closing. Fits original equipment pivot points. What it does:

• Supports the weight of a door or drawer and keeps it aligned on its track
• Guides smooth opening and closing and prevents binding or sagging
• Restores proper contact and seal when a worn pivot causes misalignment
• Helps reduce noise from loose or worn pivot points

• Disconnect power to the appliance before beginning any repair
• Access may require removing interior panels, trim, or the drawer/door per model instructions
• Handle carefully to avoid scratching sealed surfaces; replace worn fasteners if needed
• If alignment issues persist after replacement, check related hinges, tracks, and mounting hardware

This is a 10-32 machine-thread screw used to secure appliance panels, trim, and components. It replaces missing or damaged fasteners so parts fit tightly and operate without rattles or misalignment. What it does:

• Fastens panels, brackets, or assemblies that use a 10-32 machine screw
• Restores secure mounting where a stripped, missing, or corroded screw causes looseness
• Helps eliminate vibration noise or gaps caused by loose hardware
• Matches OEM thread size and length for correct fit in designated mounting holes

• One 10-32 x 5/16 machine screw

• Disconnect power and remove power source or batteries before servicing appliances
• Use the correct screwdriver or nut driver to avoid stripping the head
• Thread carefully; do not force or overtighten to prevent thread damage
• Replace any damaged mating hardware or clipped inserts for a secure repair

This rubber grommet secures the appliance's base grille, helping keep the grille fitted and reducing vibration and rattle. It's a simple replacement part to restore a snug, finished look at the appliance base. What it does:

• Cushions and retains the base grille in place to prevent gaps and movement
• Helps reduce vibration noise and rattling from a loose grille
• Restores proper fit where a grommet is cracked, torn, or missing

• One (1) grommet for the base grille

• Disconnect power to the appliance before beginning any service
• Typically installs by pressing into the grille or cabinet opening—no special tools required
• Inspect surrounding grille tabs or mounting points and replace any damaged hardware as needed

This cover fits over the refrigerator auger motor to protect internal components and help guide ice through the dispenser. It keeps the motor area enclosed to reduce debris intrusion and supports smooth auger movement. What it does

• Protects the auger motor and gearbox from ice, frost, and debris
• Helps guide ice from the bin into the auger for consistent dispensing
• Common symptom: reduced or intermittent ice dispensing, unusual noises from the dispenser area

• One cover

• High-level replacement — remove power to the refrigerator before starting
• Handle components gently to avoid damaging the auger or wiring
• If the auger still doesn't turn after replacement, check the motor, wiring, and control components

This XWFE filter cover secures the refrigerator's XWFE water filter in its housing to help maintain a proper seal and alignment for reliable water flow and filter performance. It replaces a damaged or missing housing cover. What it does:

• Covers and locks the XWFE water filter into the filter housing to keep the filter seated correctly
• Helps maintain the water seal to reduce leaks and prevent bypass
• Supports proper water flow through the filter for cleaner-tasting water
• Addresses symptoms like a loose/missing cover, filter not staying in place, or intermittent leaks near the filter area

• One XWFE filter cover

• Replace with power/water supply off; follow your refrigerator manufacturer's instructions before working on water system
• Typically installs by snapping or sliding into the filter housing—confirm alignment before pressing fully
• Inspect the filter O-ring and housing for damage and replace if necessary to ensure a proper seal

This is a replacement screw used to secure appliance components and panels so parts stay properly attached for safe operation. It's a direct-fit fastener matching OEM form and function. What it does

• Secures panels, trim, or internal components to prevent rattling or gaps
• Restores factory attachment where a screw is missing or stripped
• Helps maintain proper alignment of housing and service access
• Suitable when repair requires original-fit fasteners

• Disconnect power or unplug the appliance before servicing to avoid shock
• Use the matching screwdriver or bit to avoid stripping the head
• Thread carefully and avoid overtightening to prevent damage to threads or plastic parts
• Keep removed screws organized; replace only the screws that match the original locations

This sound damper cushions the refrigerator compressor to reduce vibration and minimize noise for quieter operation. It helps protect the compressor from metal-on-metal contact and dampens normal operating sounds. What it does:

• Cushions compressor mounting to absorb vibration and reduce noise
• Prevents metal-on-metal contact that can cause rattling or buzzing
• Helps stabilize the compressor to reduce wear from vibration
• Commonly used when compressor noise, rattling, or increased vibration is noticed

• One sound damper

• Always disconnect power to the appliance before beginning any repair
• Access the compressor area (rear lower cabinet); remove any panels as needed
• Remove the old damper and press the replacement onto the compressor mounting foot until fully seated
• If mounting hardware is damaged or the compressor mount appears worn, replace mounting parts.

The MWF Bypass is an OEM replacement part for GE refrigerators. Located within the bottom freezer compartment, the metal water filter bypass fitted assembly is responsible for directing filtered or unfiltered water flow to the ice maker and dispenser.

Causes for replacement may include faulty diverter components obstructing water flow to selections or resulting in water leaks.

Symptoms of a problematic bypass unit include:

• Inability to select filtered or unfiltered water from the dispenser
• Ice maker failure due to lack of water or poor water quality
• Mineral deposits accumulating on internal parts from unfiltered water

This OEM replacement bypass is compatible with GE, Hotpoint, and Profile model refrigerators.

This water filter manifold and tubing assembly fits refrigerators that use the XWF-style filter. It holds and seals the filter cartridge and routes water to the dispenser and icemaker for correct flow and leak-free operation. What it does:

• Mounts and seals the XWF filter cartridge
• Routes water through the filter to the dispenser and ice maker
• Replaces a cracked, clogged, or leaking filter head/manifold
• Typical symptoms: leaks at the filter connection, weak/no water dispensing, reduced ice production, filter won't seat or stay in

• One manifold/head with attached inlet and outlet tubing

• Unplug the refrigerator and shut off the water supply
• Dispense water to relieve pressure; place a towel or pan to catch residual water
• Release quick-connect fittings; note tube routing and transfer any mounting hardware from the old assembly
• Restore water and power, check all connections for leaks, and flush several cups of water to purge air

This LED board mounting bracket secures the interior light board inside your refrigerator. Replacing a cracked or missing bracket restores proper support for the LED module so the compartment light stays stable and correctly positioned.

• Holds the LED light board securely within the light housing
• Aligns the board for consistent, even illumination
• Replaces broken, warped, or loose mounting hardware
• Common symptoms: intermittent light when the housing is touched, sagging/rattling light board, or visible cracked bracket

• Disconnect power to the refrigerator before service
• Remove the light lens/cover and release the failed bracket
• Transfer the LED board to the new bracket; handle electronics by the edges
• Reinstall the cover and restore power to test operation

The Interface Dispenser Assembly is an OEM part for GE refrigerators. This assembly serves as the control panel for your refrigerator's dispenser, allowing you to easily dispense water, ice, and other functions.

A bad interface dispenser assembly can occur due to electrical issues, component failure, or other factors. If you notice symptoms such as unresponsive buttons, dispenser not working, or incorrect display readings, it may be time to replace the interface dispenser assembly.

Symptoms of a bad interface dispenser assembly include:

• Unresponsive buttons
• Dispenser not working
• Incorrect display readings

Restore the function of your GE refrigerator's dispenser by replacing the faulty interface dispenser assembly with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.