Gtd33easkww Parts

This main wiring harness routes power and signals between the dryer's control and major components, restoring reliable electrical connections so the dryer can run cycles and heat as intended. What it does

• Carries power and control signals between the timer/control, motor, heating element and safety switches
• Replaces damaged, burnt, or disconnected wiring that can prevent the dryer from starting
• Addresses intermittent power, sporadic operation, or loss of heating when caused by wiring faults
• Restores proper connector fit and circuit continuity when original harness terminals are corroded or loose

• Always disconnect the dryer from power (unplug or shut off breaker) before beginning work
• Verify correct routing and secure connections to match the original harness; avoid pinching or sharp bends
• Inspect mating connectors and terminals for damage; replace if necessary

This factory screw fastens appliance panels, brackets, and internal components. Replacing missing or damaged hardware restores a secure fit, reduces vibration and rattles, and keeps assemblies properly aligned for reliable operation.

• Secures panels, brackets, and assemblies as designed for your model
• Replaces missing, stripped, or corroded hardware
• Helps resolve loose panels, vibration/rattling, or misalignment
• Maintains proper fit and function of mounted components

• Disconnect power; shut off gas and water before service
• Match to the original screw and location; order the quantity your model requires
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Refer to your model's parts diagram or service information for exact placement

The Shoe Drying Rack is an OEM accessory component specifically designed for select GE dryers. As an added feature, this rack provides a convenient way to dry shoes along with regular laundry items. It allows wet shoes to be tumbled gently while being fully ventilated to dry effectively.

Symptoms of a bad shoe drying rack include:

• Broken or cracked rack supports that collapse the structure
• Missing hooks or attachment points to secure the rack in place  
• Rust, corrosion, or other damage that compromises its functionality

Causes of a bad shoe drying rack can include normal wear and tear over extended use, exposure to excessive heat levels, or damage from overloading or improper handling.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Trap Duct Assembly is an OEM part for GE dryers. It is responsible for guiding airflow through the dryer and out the vent, while also trapping lint and debris before it exits the dryer. 

Causes of a bad trap duct assembly can include excess buildup of lint that clogs the assembly, damage or cracks in the assembly that reduce airflow, or loose or missing components. 

Symptoms of a bad Trap Duct Assembly include: 

• Reduced or inefficient drying times 
• Vibrating or rattling noises from the vent area
• Excessive lint building up inside the dryer
• Vent blockages or restrictions 

This OEM GE replacement is also compatible with Hotpoint, RCA, and some Kenmore models. 

This white front panel restores the visible exterior and protects the control area on compatible GE ranges. It replaces cracked, dented or discolored panels to give the appliance a clean, finished appearance and support for mounted components. What it does:

• Covers and protects the control console and internal components from spills, heat, and impact
• Restores worn or damaged cosmetic finish and helps the range look like new again
• Provides the proper mounting surface and alignment for trim and controls
• Helps prevent debris from entering internal compartments that can affect operation

• Disconnect power (and gas if applicable) before starting any service to avoid shock or injury
• Remove the existing front panel by removing retaining screws; handle edges carefully to avoid cuts
• Reuse original mounting hardware unless new hardware is explicitly included

This complete dryer drum assembly replaces the rotating tub that holds and tumbles clothes, restoring proper drum movement and drying performance. Fits compatible GE/TAPPAN dryers and brings back secure, balanced load tumbling. What it does:

• Replaces the dryer's spinning drum so clothes tumble freely during cycles
• Restores even airflow and contact with the heating element for consistent drying
• Stops squeaks, scraping, or grinding caused by a damaged or warped drum
• Helps eliminate clothes catching or rubbing on drum edges that can cause wear

• One complete dryer drum assembly

• Disconnect power before servicing; this part requires panel and/or front removal
• Use basic hand tools; lifting the drum may require two people to avoid strain
• Inspect glide rings, rollers, seals, and belt while replacing the drum and replace as needed

This wire group assembly routes electrical power and signals between oven components to restore proper operation and safety. Replacing a damaged harness helps stop intermittent power, faulty controls, or non-working elements. What it does:

• Connects control board, switches, heating elements and sensors so components receive correct power and signals.
• Replaces frayed, burned or broken wires that can cause intermittent operation or loss of function.
• Helps resolve symptoms like burners or oven elements not heating, controls not responding, or lights failing.
• Keeps wiring organized and secured to reduce stress and chafing that can lead to shorts.

• Disconnect all power (unplug or shut off breaker) before beginning any repair.
• Compare new harness to the original for connector types and routing before removing the old part.
• Route harness along original clips and fasteners; avoid contact with sharp edges or hot surfaces.
• If wires show heat damage at terminals, inspect connected components and replace as needed.

This plate motor drives the microwave/oven turntable, keeping the glass tray rotating for even cooking and heating. Replaces a worn or failed motor to restore tray rotation and reduce uneven heating. What it does:

• Turns the glass turntable so food cooks evenly
• Stops rotation or hesitates when motor fails or wears out
• May make buzzing, grinding, or intermittent noises before failing
• Prevents the turntable from rotating if the motor no longer engages

• One replacement plate (turntable) motor

• Disconnect power before servicing to avoid shock; verify unit is fully powered off
• Remove the turntable glass and roller guide to access the motor underneath the oven/microwave floor
• Typical install requires removing interior fasteners and unplugging the motor connector; retain hardware for reassembly

This blower housing assembly directs airflow from the dryer motor to the drum and exhaust, restoring proper venting and drying performance. It replaces a damaged or cracked housing to help the dryer move air efficiently. What it does:

• Channels airflow from the motor to the lint filter and exhaust duct
• Supports the blower wheel and maintains correct blower clearance
• Helps prevent air leaks that can cause poor drying or overheating
• Commonly replaced when the housing is cracked, warped, or excessively worn

• One blower housing assembly as shown

• Disconnect power before beginning any repair; ensure the dryer is unplugged or its breaker is off
• Removal may require access panels and disconnection of the blower wheel and motor mounting hardware
• Inspect and clean nearby lint and venting while the dryer is disassembled

This is a genuine GE replacement screw used to secure appliance panels and components, restoring proper fit and reducing vibration or rattling. A simple fastener that helps keep assemblies aligned and functioning safely. What it does:

• Secures panels, brackets, and small components in place
• Prevents noise from loose parts and maintains structural alignment
• Restores proper fastening after repairs or wear
• Matches OEM fit for reliable replacement

• Disconnect power to the appliance before accessing internal parts
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread carefully and tighten until snug; do not overtighten to prevent damage
• Replace any damaged or missing fasteners with the same OEM part for best results

This motor support is the stamped metal bracket that secures the dryer motor and blower assembly, keeping components aligned for smooth operation. It restores proper motor mounting and reduces noise from loose or misaligned parts. What it does:

• Holds the dryer motor and blower housing in the correct position to prevent wobble or misalignment
• Helps maintain proper blower alignment for effective air movement
• Supports safe, reliable motor operation when the original bracket is bent, cracked, or worn

• Disconnect power (unplug electric or shut off gas and breaker) before beginning repair
• Access requires opening the dryer cabinet and removing the drum and/or front panel on many models
• Inspect related components (motor mounts, blower wheel, idler, belt) and replace if damaged

This black jumper harness is a direct replacement electrical connector that restores wiring continuity between appliance components, helping re-establish reliable power or signal paths and resolving connection-related failures. What it does:

• Provides a prefabricated wiring connection between two appliance components to restore continuity
• Transfers power or control signals where the original harness is damaged or corroded
• Commonly used when worn, melted, or broken leads cause intermittent operation or loss of function
• Helps prevent loose connections that can cause arcing or heat buildup when installed correctly

• Disconnect power to the appliance before inspecting or replacing wiring
• Match connector shapes and wire colors; do not splice unless using proper connectors and insulation
• Route and secure the harness away from heat sources, sharp edges, and moving parts
• Test affected function after installation and restore any removed panels or fasteners