Gtd42esj2ww Parts

This replacement side panel restores the exterior cabinet surface and protects internal components from dust and damage while keeping the appliance looking finished. It matches OEM fit and finish for a seamless appearance. What it does:

• Replaces a dented, scratched, or corroded cabinet side to restore the appliance's exterior
• Shields wiring, insulation, and internal components from accidental contact and debris
• Helps maintain proper airflow gaps and enclosure integrity where applicable
• Improves overall appearance for a like-new look

• One replacement side panel

• Disconnect power (and water if applicable) before starting any repair
• Remove trim, screws, or mounting clips securing the existing panel; retain fasteners unless replacements are provided
• Align the new panel carefully and secure with the original mounting hardware

This socket assembly is the replacement connector that restores a secure electrical connection between wiring and the appliance component, helping eliminate intermittent power or component failure caused by a damaged socket. What it does:

• Provides a secure electrical connection for the targeted component to restore reliable operation
• Replaces a worn, cracked, or burnt socket that can cause intermittent power, no operation, or arcing
• Holds wiring and the component plug in correct alignment to prevent loose contacts
• Helps prevent heat buildup or further wiring damage when the original socket is compromised

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Inspect surrounding wiring and connectors; replace any damaged wires or terminals

The Shoe Drying Rack is an OEM accessory component specifically designed for select GE dryers. As an added feature, this rack provides a convenient way to dry shoes along with regular laundry items. It allows wet shoes to be tumbled gently while being fully ventilated to dry effectively.

Symptoms of a bad shoe drying rack include:

• Broken or cracked rack supports that collapse the structure
• Missing hooks or attachment points to secure the rack in place  
• Rust, corrosion, or other damage that compromises its functionality

Causes of a bad shoe drying rack can include normal wear and tear over extended use, exposure to excessive heat levels, or damage from overloading or improper handling.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Backsplash is an OEM part for GE dryers. The backsplash provides a user-friendly interface for selecting various drying options, such as cycle type, temperature, and special features. 

A bad backsplash control panel can occur due to wear and tear, electrical malfunctions, or physical damage. If you notice symptoms such as unresponsive buttons, error codes on the display, or the panel not lighting up, it may be time to replace this part.

Symptoms of a bad backsplash control panel include:

• Cosmetic damage
• Buttons not working
• Panel not lighting up

Regain full control over your GE dryer's settings by replacing the faulty backsplash control panel with this genuine OEM part.

This GE replacement part is designed specifically for GE dryers and may not be compatible with other brands.
 

This factory screw fastens appliance panels, brackets, and internal components. Replacing missing or damaged hardware restores a secure fit, reduces vibration and rattles, and keeps assemblies properly aligned for reliable operation.

• Secures panels, brackets, and assemblies as designed for your model
• Replaces missing, stripped, or corroded hardware
• Helps resolve loose panels, vibration/rattling, or misalignment
• Maintains proper fit and function of mounted components

• Disconnect power; shut off gas and water before service
• Match to the original screw and location; order the quantity your model requires
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Refer to your model's parts diagram or service information for exact placement

The Trap Duct Assembly is an OEM part for GE dryers. It is responsible for guiding airflow through the dryer and out the vent, while also trapping lint and debris before it exits the dryer. 

Causes of a bad trap duct assembly can include excess buildup of lint that clogs the assembly, damage or cracks in the assembly that reduce airflow, or loose or missing components. 

Symptoms of a bad Trap Duct Assembly include: 

• Reduced or inefficient drying times 
• Vibrating or rattling noises from the vent area
• Excessive lint building up inside the dryer
• Vent blockages or restrictions 

This OEM GE replacement is also compatible with Hotpoint, RCA, and some Kenmore models. 

This rotary switch is the user control that selects heat/settings for the appliance, restoring reliable selection and responsive control of cycles or temperature settings. It replaces a worn or non-responsive selector control. What it does:

• Switches between user-selected settings or heat levels when the control knob is turned
• Restores proper electrical contact for consistent operation and accurate selection
• Common symptom: knob turns but appliance does not change setting or cycle
• Common symptom: intermittent operation or loss of selected function

• One rotary selector switch

• Disconnect power to the appliance before servicing to avoid shock hazard
• Access typically requires removing the console or control panel; keep fasteners organized
• Verify knob alignment and any retaining clip or harness connector seating during reassembly

This white front panel restores the visible exterior and protects the control area on compatible GE ranges. It replaces cracked, dented or discolored panels to give the appliance a clean, finished appearance and support for mounted components. What it does:

• Covers and protects the control console and internal components from spills, heat, and impact
• Restores worn or damaged cosmetic finish and helps the range look like new again
• Provides the proper mounting surface and alignment for trim and controls
• Helps prevent debris from entering internal compartments that can affect operation

• Disconnect power (and gas if applicable) before starting any service to avoid shock or injury
• Remove the existing front panel by removing retaining screws; handle edges carefully to avoid cuts
• Reuse original mounting hardware unless new hardware is explicitly included

This main wiring harness routes power and signals between the dryer's controls and internal components so the dryer can operate reliably. It restores proper electrical connectivity for affected circuits. What it does

• Provides the primary electrical connections between the control console, motor, heating circuit and sensors
• Restores power and signal paths that allow the dryer to start and run
• Resolves symptoms such as no start, intermittent operation, or control/heat-related failures
• Replaces a damaged, burnt, or fractured harness that causes open or shorted circuits

• Disconnect power at the breaker or unplug the dryer before servicing
• Compare the new harness to the old one and route wires exactly as originally installed
• Reconnect all plugs and terminals fully; ensure secure, corrosion-free connections

This motor support is the stamped metal bracket that secures the dryer motor and blower assembly, keeping components aligned for smooth operation. It restores proper motor mounting and reduces noise from loose or misaligned parts. What it does:

• Holds the dryer motor and blower housing in the correct position to prevent wobble or misalignment
• Helps maintain proper blower alignment for effective air movement
• Supports safe, reliable motor operation when the original bracket is bent, cracked, or worn

• Disconnect power (unplug electric or shut off gas and breaker) before beginning repair
• Access requires opening the dryer cabinet and removing the drum and/or front panel on many models
• Inspect related components (motor mounts, blower wheel, idler, belt) and replace if damaged

This socket assembly provides a secure electrical connection for the appliance's component, restoring reliable power transfer where a worn or damaged socket prevents operation. It's a direct-fit replacement designed to reinstall using the original wiring and mounting points. What it does:

• Re-establishes a solid electrical connection between the appliance wiring and the component to restore functionality
• Commonly replaces sockets that are cracked, corroded, burned, or loose and cause intermittent operation
• Helps stop arcing, overheating at the terminal, or loss of power to the connected component
• Matches OEM fit and mounting to maintain safe, stable contact under normal use

• One socket assembly

• Disconnect power (unplug or switch off circuit breaker) before starting any repair
• Note wire colors/locations or take a photo before removing old socket to ensure correct reconnection
• Use appropriate tools; avoid crimping or pinching wires—replace any damaged wiring or terminals
• If corrosion, heat damage, or melting is present on surrounding components, inspect and replace affected parts.

This plate motor drives the microwave/oven turntable, keeping the glass tray rotating for even cooking and heating. Replaces a worn or failed motor to restore tray rotation and reduce uneven heating. What it does:

• Turns the glass turntable so food cooks evenly
• Stops rotation or hesitates when motor fails or wears out
• May make buzzing, grinding, or intermittent noises before failing
• Prevents the turntable from rotating if the motor no longer engages

• One replacement plate (turntable) motor

• Disconnect power before servicing to avoid shock; verify unit is fully powered off
• Remove the turntable glass and roller guide to access the motor underneath the oven/microwave floor
• Typical install requires removing interior fasteners and unplugging the motor connector; retain hardware for reassembly