Gts18hynrfs Parts

The Ice Bucket is an OEM part for GE refrigerators. It is a component that stores ice from the icemaker in the freezer compartment. The ice bucket allows for convenient access to ice on demand, fitting seamlessly within the refrigerator design.

Symptoms of a bad ice bucket include:

• Cracks or damage to the plastic material
• Inability to easily remove or insert the bucket  
• Ice falling out of the bucket improperly
• Missing parts like the handle

Note: This is just the ice bucket. It does not include other ice maker components.

Replace your worn ice bucket before further issues arise like ice spilling in the freezer. This OEM GE part restores your refrigerator’s storage and access to ice. It is also compatible with Hotpoint, RCA, and Kenmore refrigerators.
 

The Capacitor is an OEM component specifically designed for GE refrigerators with bottom-mount freezers. Located inside near the compressor unit, it aids in powering the refrigerator system during startup.

Causes of a bad capacitor include normal wear from thousands of startup cycles. Exposure to moisture or fluctuating voltages over many years can diminish performance.

Symptoms of a failing capacitor include:

• Inconsistent cooling or inability to lower temperatures
• Buzzing or humming noises from inside the fridge 
• Repeatedly tripping the power breaker 

Replacing with this genuine GE capacitor restores reliable operation. Compatible with GE bottom-freezer models, it features reliable aluminum electrolytic construction. Backed by GE quality, this replacement ensures smooth powering of the compressor for efficient cooling cycles. Compatible replacements are also available for GE Profile and GE Cafe series refrigerators.
 

The Defrost Heater Assembly is an OEM replacement part for GE refrigerators. This assembly is responsible for preventing the buildup of ice and frost on the evaporator coils by providing controlled heat during the defrost cycle. It helps prevent ice accumulation that can hinder the refrigerator's ability to cool properly.

A bad defrost heater assembly can occur due to electrical issues, component failure, or damage to the heating element. If you notice symptoms such as excessive frost or ice buildup in the freezer compartment, inconsistent cooling, or water leaking from the refrigerator, it may indicate a need to replace the defrost heater assembly.

Symptoms of a bad defrost heater assembly include:

• Excessive frost or ice buildup in the freezer compartment
• Inconsistent cooling
• Water leaking from the refrigerator

Restore your refrigerator by replacing the faulty defrost heater assembly with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Grommet Water Fill Assembly is an OEM component specifically designed for GE top-mount refrigerators. It is located at the back of the fresh food compartment and consists of the water inlet grommet that channels water from the external line.

During use, causes of failure can include mineral buildup on the filter over time inhibiting proper water flow. Deterioration of the inlet grommet seal may also occur.

Symptoms of a bad water fill assembly include:

• Slow or incomplete filling of the internal water tank  
• Leaks occurring at the rear water inlet connection point
• Mineral deposits building up within the internal waterways

This OEM GE replacement ensures a secure seal and mesh filtration for clear, contaminant-free water going to the dispenser. It maintains proper filling and is also compatible with Hotpoint, RCA, and some Kenmore models.

This compressor start device is the overload/PTC relay combo that mounts on the compressor. It delivers the initial start boost and protects against overheating so your refrigerator starts reliably and maintains proper cooling.

• Provides start assistance to the compressor, then disengages once the motor is running
• Integrated overload opens on overcurrent/overheat to protect the compressor
• Common failure symptoms: not cooling, compressor won't start, rapid clicking or buzzing from the rear, intermittent cooling
• Mounts directly to the compressor terminals for a secure, correct connection

• Disconnect power and allow the compressor to cool before servicing
• Remove the rear access cover; note wire orientation
• Pull the old device straight off the compressor pins; push the new assembly fully onto the pins until seated
• Restore power and confirm the compressor starts smoothly

This genuine fastener secures appliance components such as panels and brackets. Replacing a missing or stripped screw restores proper fit and helps reduce vibration or rattling. Features 12-24 threads and an approximate 0.785-inch length. What it does:

• Fastens panels, brackets, covers, and other hardware points in the appliance
• Helps maintain proper alignment and a tight fit of components
• Replaces damaged, stripped, or missing hardware
• Common symptoms include loose or rattling parts and hardware that won't tighten

• One screw

• Disconnect power before servicing; shut off water supply if working near water components
• Start the screw by hand to avoid cross-threading; replace one-for-one in the original location
• Use the correct driver bit for the head style; tighten snugly without overtightening into plastic or thin metal

The Water Tube is an OEM replacement part for GE refrigerators. It is responsible for delivering water to the dispenser and ice maker, ensuring a steady flow of chilled water and ice cubes.

A bad water tube can occur due to wear and tear over time or damage caused by mishandling or accidents. If you notice symptoms such as water leaks, reduced water flow, or ice maker malfunctions, it may indicate a need to replace the water tube.

Symptoms of a bad water tube include:

• Water leaks or drips from the dispenser or ice maker
• Reduced water flow or weak water pressure
• Inconsistent ice production or ice cube quality

Restore your refrigerator by replacing the faulty water tube with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

Air tower directs cold air from the evaporator into the refrigerator compartment to improve airflow and temperature consistency. Replaces cracked or misaligned air guides that can cause uneven cooling or warm spots. What it does:

• Channels chilled air from the evaporator into the fresh-food compartment for more consistent temperatures.
• Helps reduce uneven cooling and warm spots caused by blocked or damaged airflow paths.
• Restores proper airflow that can prevent excessive frost or ice buildup in the evaporator area.
• Common replacement when the existing tower is cracked, warped, or missing sections.

• Disconnect power to the appliance before starting any repair.
• Remove shelves, bins, or inner liners as needed to access the tower; basic hand tools may be required.
• Align tabs/clips and gently snap or secure the tower into place; avoid forcing to prevent cracking.
• If frost or ice is present, fully defrost and dry the area before installing the new part.

The Drier is an OEM component specifically designed for GE combination refrigerator-freezers. Absorbing moisture, its treated silica particles buffer humidity within refrigerant lines. Proper drying sustains energy-efficient performance while preventing corrosion.

Causes of a faulty drier commonly relate to saturation reducing capacity. As desiccant degrades, water passes into closed system compressors requiring change. 

Symptoms of a bad drier involve:

• Frost and ice buildup impairing cooling  
• Puddling around evaporator evidencing leaks
• Higher operating costs from impaired efficiency

Causes of a bad drier involve typical saturation shortening drying cycles. Cracks release desiccant particles risking blockages necessitating timely replacement.

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire combination units. Replace to retain steady humidity management protecting components and maximizing freshness years of operation.
 

This replacement refrigerator door stop cushions and limits door travel to help prevent slamming and misalignment. It restores smooth, controlled door movement and helps the door stay properly positioned for reliable sealing. What it does:

• Absorbs impact and reduces door slam noise when opening or closing
• Limits door travel to prevent over-rotation that can damage the cabinet or hinge
• Helps maintain proper door alignment for an effective seal
• Commonly used when a door slams, hangs open, or rubs against the cabinet

• Unplug the appliance or disconnect power before working near electrical components
• Support the door while removing or installing the stop to prevent it from shifting
• Use appropriate hand tools; do not force or overtighten fasteners

Front control housing replaces the appliance's front control console to restore appearance and provide a secure mounting surface for the control components. It helps keep buttons, knobs, and the control board properly aligned and protected. What it does:

• Houses and supports the control board, touchpad/buttons and display so controls stay securely mounted.
• Replaces cracked, warped or damaged console sections that cause loose or misaligned buttons.
• Restores proper button and dial alignment when physical damage prevents normal operation.
• Helps reduce exposure of internal control parts to dust and splashes from normal use.

• Disconnect power (unplug appliance or switch off circuit breaker) before beginning any work.
• Removal typically requires taking off the control panel and detaching wiring—handle ribbon cables and connectors gently.
• Use the correct screwdriver and hardware; avoid overtightening screws to prevent cracking the plastic.

The GE Badge is an OEM replacement part for GE refrigerators. It is responsible for displaying the GE branding on the front exterior. Over time, the badge can become damaged from exposure and wear. Causes of a failing badge include sun damage, scrapes, and deterioration of the adhesive.

Symptoms of a bad refrigerator badge:

• Peeling edges or corners
• Discoloration or fading
• Scratches or scuffs
• The badge falling off completely

This GE badge is also compatible with Hotpoint, RCA, and some Kenmore models.

This freezer door stop replaces the damaged or worn bumper that cushions the freezer door, helping it close smoothly and preventing damage to the door or cabinet. Color-matched Dorian Gray finish. What it does:

• Cushions door movement to reduce banging and wear
• Helps the door seal more consistently by providing proper stopping position
• Reduces noise when opening or closing the freezer door
• Restores original fit and finish for a clean, finished appearance

• Basic hand tools may be required; follow the appliance manufacturer's instructions
• Power off and empty the door area if required for safe access before installing
• Inspect surrounding trim and mounting area; replace mounting screws if worn or damaged

This rear control housing replaces the rear enclosure that supports and protects the range/stove control area, restoring a secure mounting surface and covering wiring for safe operation and tidy appearance. What it does

• Secures the control board and control knobs so controls stay firmly mounted.
• Covers and protects control wiring from heat, debris, and accidental contact.
• Stops rattling or loose-feeling controls caused by cracked or broken housing.
• Helps restore proper alignment for control components and switches.

• Disconnect power to the appliance before beginning any work.
• Requires removal of the back panel and/or control console to access mounting points.
• Handle the housing and attached wiring gently to avoid damaging connectors or the control board.
• Use original fasteners; verify fit before final reassembly and test controls after reconnecting power.