Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Gtup240gm Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Wiring Harness (Main, Assembly)
Genuine Ge part
By: Ge
Part Number: WE26X20715

This main wiring harness assembly routes power and signals between an appliance's control board and components so the unit can operate reliably. It replaces a damaged or failed harness to restore electrical connections. What it does:

  • Carries power and control signals between the control board and major components
  • Re-establishes connector-to-connector wiring when original harness is frayed, burned, or has broken terminals
  • Helps resolve symptoms such as no power to components, intermittent operation, or control/display errors when caused by damaged wiring
  • Prevents shorting or arcing from exposed wires when installed correctly
What's included:
  • 1 main wiring harness assembly
Install notes:
  • Disconnect power to the appliance before starting any work to avoid shock or injury
  • Compare connectors and wire routing to the original harness to ensure correct installation
  • Route and secure the harness with existing clips and fasteners; avoid pinching or chafing wires

More
$253.09

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dryer Mounting Screw
Genuine Ge part
By: Ge
Part Number: WE2M223

Mounting screw for dryer assembly. Secures panels, brackets, or internal components. Replace if stripped, missing, or damaged during repairs.

More
$9.88

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Scr 8-18 Ab 1/2 (Silicon Controlled Rectifier)
Genuine Ge part
By: Ge
Part Number: WE2M281

This SCR 8-18 AB 1/2 is a replacement silicon controlled rectifier that restores proper power control to the appliance's control circuitry, helping the unit switch and regulate current reliably. What it does:

  • Controls current flow in the appliance's power/control circuit for timed or regulated output
  • Replaces a failed or intermittent SCR to stop erratic cycling, no-power, or control malfunctions
  • Commonly used where electronic switching or phase control is required
  • Helps restore stable operation when heating or motor circuits fail to receive proper control signals
What's included:
  • One SCR 8-18 AB 1/2 replacement component
Install notes:
  • Disconnect power to the appliance before inspecting or replacing electrical components
  • Observe ESD precautions and handle the SCR by its body; avoid touching leads
  • Verify wiring and mounting orientation match the original part before final assembly

More
$9.88

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Hex Screw (8-32 Trilobular), 1 Count
Genuine Ge part
By: Ge
Part Number: WH01M10001

This is a replacement 8-32 trilobular hex screw used to fasten appliance panels and components. It restores secure mounting and helps eliminate loose parts or rattling caused by missing or worn fasteners. What it does:

  • Secures panels, brackets, or components in place using an 8-32 trilobular thread form
  • Helps prevent vibration, rattling, and loose connections when fasteners are missing or stripped
  • Designed to match OEM thread style for proper engagement and retention
  • Used wherever a small hex-head machine screw is required for assembly
What's included: One 8-32 trilobular hex screw Install notes:
  • Use the correct driver/socket to avoid rounding the hex head
  • Tighten to snug fit; avoid over-torquing which can strip threads or damage parts
  • If replacing a stripped hole, inspect mating threads and consider a thread repair or alternate fastening method
  • Disconnect power to the appliance before accessing internal components to reduce risk of shock or injury

More
$8.76

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Hose Clip (Hose Retainer), 1 Count
Genuine Ge part
By: Ge
Part Number: WH01X10592

A small replacement hose clip that secures flexible appliance hoses to fittings to help prevent leaks and disconnections. Fits commonly used appliance hose connections to restore a secure seal and reliable water flow. What it does:

  • Secures a water or drain hose to a barb or fitting to prevent the hose from coming loose
  • Helps stop leaks and drips caused by loose or slipping hoses
  • Prevents hose movement and rubbing that can lead to wear or abrasion
  • Useful when a hose slips off during operation or after maintenance
What's included: One hose clip Install notes:
  • Disconnect power and shut off the water supply before servicing the appliance
  • Use appropriate hand tools (needle-nose pliers or hose clamp pliers) to open and seat the clip
  • Position the clip over the fitting and tighten until the hose is snug and secure; avoid over-tightening
  • Replace only with the correct OEM-style clip for a proper fit

More
$9.24

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Scr 6-20 B Trt 3/8 S
Genuine Ge part
By: Ge
Part Number: WH01X10624

 

More
$9.88

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Damper Pad
Genuine Ge part
By: Ge
Part Number: WH01X10630

 

More
$12.37

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Stud Grounding
Genuine Ge part
By: Ge
Part Number: WH02X10347

 

More
$10.22

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Brace Front Upper 24
Genuine Ge part
By: Ge
Part Number: WH13X37177

 

More
$34.13

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Harness Selector
Genuine Ge part
By: Ge
Part Number: WH19X10082

 

More
$55.76

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Laundry Center Wire Harness Extension Assembly
Genuine Ge part
By: Ge
Part Number: WH19X10084

Wire harness extension assembly for laundry centers. Replaces damaged, frayed, or broken wiring harness extensions. Essential for safe electrical connections.

More
$20.29

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Laundry Center Hose Cover Cap
Genuine Ge part
By: Ge
Part Number: WH44X10280

Hose cover cap for laundry center units. Covers and protects hose connections. Replace if cracked, broken, or missing to prevent leaks and damage.

More
$20.20

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kit Bracket 24"" Asm "
Genuine Ge part
By: Ge
Part Number: WH49X10094

 

More
$27.25

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Agitator Screw
Genuine Ge part
By: Ge
Part Number: WH01X10619

Secures the washer agitator to the drive shaft. Replace if lost, stripped, or rusted to eliminate wobble and restore proper agitation during wash cycles.

Do-It-Yourself Stories from Customers like You Dirty agitator shaft otherwise nothing was broke   Kermit W. • Middletown , DE • October 07, 2019

Removed the agitator shaft and cleaned everything. I had to buy a 12-inch extension to remove the bolt that holds the agitator in place. Read more

More
Washer Tub Fill Nozzle Assembly
Genuine Ge part
By: Ge
Part Number: WH13X10051

This is a tub fill nozzle assembly that directs water from the inlet valve into the washer tub during the fill cycle. It connects between the water inlet and the wash tub to funnel water into the drum. Replace this part if you notice water leaking near the top of the tub, water spraying in the wrong direction, or if the nozzle is cracked or broken.

Do-It-Yourself Stories from Customers like You My washer would start filling then stop   Lori L. • Phoenix , AZ • October 11, 2018

I called a appliance repair company to fix my washing machine when they took it apart there was water in the control board area and they said I needed a new board control which would cost $356, but never addressed how the water was getting into the board control area. So I investigated and realized the funnel shower head was cracked and shooting water straight out instead of down into the tub. I found Appliance Parts Pros online and found the part I needed & watched a couple of their videos on... Read more

More
Washer Suspension Rod Support Socket
Genuine Ge part
By: Ge
Part Number: WH01X10620

Plastic cup that holds the suspension rod at the tub connection point. Replace if cracked, worn, or broken to restore proper tub support and alignment.

Do-It-Yourself Stories from Customers like You Washing tub wouldn't spin without going out of balance even when empty   Dion H. • Ventura , CA • February 05, 2021

Discovered that one of the rear tub support rods (which are different than the front support rods), had permanently compressed the internal spring, requiring replacement. I also replaced the plastic rod support socket to be sure that all the components would be updated. Removing the front panel allowed me to also remove the top lid panel, enabling access to the rear rod without completely disconnecting the machine & accessing the rear panel. Be aware that the internal sheet metal has sharp... Read more

More
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google