Gtup240gm Parts

This spring cover protects and retains a mechanism spring inside your washer. Replacing a cracked or missing cover helps keep the spring seated, limits debris intrusion, and supports smooth, reliable movement of the associated control, latch, or linkage.

• Shields the spring and helps keep it properly seated in its pocket
• Reduces friction and wear that can lead to premature spring failure
• Supports consistent return action for the related control, latch, or lever
• Typical symptoms include a missing/broken cover, exposed spring, rattling, or erratic operation

• Unplug the appliance and turn off water before servicing
• Access point varies by model; photograph spring/cover orientation before removal
• Control the spring during disassembly to prevent sudden release
• Ensure the cover is fully seated; test operation before final reassembly

This electronic control board assembly is the washer's central controller, managing cycle selection, timing, and communication with key components. Replacing a failed board can restore proper operation and dependable cycle performance. What it does

• Interprets user inputs and sensor signals to run wash, rinse, and spin sequences
• Sends power and control signals to the motor, drain pump, water valves, and lid/lock as designed
• Controls cycle timing, speeds, and status indicators
• Symptoms may include: washer won't power on or start, unresponsive controls, cycle won't advance or stops mid-cycle, or error codes/blinking lights

• One electronic control board assembly

• Disconnect power before servicing; verify no voltage is present
• Handle the PCB by the edges and use ESD protection
• Photograph/label wiring; transfer connectors to the new board one at a time
• Secure the board in the original mounts; some models may require configuration per service instructions

This adjustable leveling leg supports and stabilizes your washer. Replacing a worn or missing foot helps the appliance sit flat on the floor, reducing rocking, vibration, and noise for smoother, safer operation. What it does:

• Threads into the base to set height and level the cabinet
• Provides a stable contact point with the floor to minimize movement
• Helps address excessive vibration, rattling, "walking," and out-of-balance issues when the washer isn't level
• Direct replacement for a damaged or missing leveling leg

• 1 leveling leg

• Disconnect power and water before servicing; move the appliance carefully to access the foot
• With assistance, tip or raise the unit as needed to reach the leg safely
• Unscrew the old leg; thread in the new leg by hand and adjust until the washer is level front-to-back and side-to-side
• Tighten the lock nut and recheck stability; run a test cycle to verify

Bleach funnel directs liquid bleach from the washer dispenser into the wash tub for even distribution and helps reduce spills, pooling, and bleach odor. Designed to replace cracked, clogged, or worn dispenser funnels. What it does:

• Directs bleach into the wash tub for consistent dispensing and mixing during the wash cycle.
• Helps prevent bleach pooling, dispenser leaks, and blockages that can cause odors or uneven bleaching.
• Replaces damaged or deteriorated funnels; common symptoms include visible cracks, leaking, or persistent bleach residue in the dispenser area.

• Disconnect power to the appliance before servicing to reduce risk of shock or injury.
• The funnel typically seats or snaps into the dispenser housing.
• Inspect and clean surrounding dispenser components before installing the new funnel; rinse the part to remove any manufacturing residue.
• Handle concentrated bleach with care—wear gloves and follow bleach safety instructions.

This support sensor board is the OEM electronic interface that links appliance sensors to the main control, restoring reliable sensor reporting and helping stop sensor-related errors or intermittent operation after a failed board. What it does:

• Routes sensor signals to the main control so readings are interpreted correctly
• Supports normal sensor communications and helps prevent intermittent or erratic behavior
• Common symptom linkage: sensor error codes, incorrect or fluctuating sensor readings, or intermittent unit operation
• Used as a direct replacement for a failed or damaged sensor interface board

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Ground yourself and avoid touching circuit traces or connector pins to prevent ESD damage
• Verify connector seating and routing of any harnesses; re-check connections before restoring power

Package of 12

This hex washer-head screw secures dishwasher components like brackets, shields, and panels. Replacing a stripped or missing screw restores a tight fit and helps prevent vibration, rattling, and loose parts during operation.

• Fastens parts where a #10-16 x 1/2-inch hex washer-head screw is specified
• Secures brackets, panels, and assemblies to the tub or frame
• Helps resolve symptoms like loose panels, vibration, or rattling noises
• Restores proper hold when the original screw is stripped, missing, or damaged

• Disconnect power and shut off water to the dishwasher before servicing
• Match length and thread to the original; replace screws one at a time to maintain alignment
• Start threading by hand to avoid cross-threading; tighten snugly—do not overtighten, especially into plastic
• Verify no wires or hoses are pinched before reassembly

• Size: #10-16 x 1/2 inch
• Head: hex washer-head
• Type: AB tapping screw

Includes 12 screws. Size: 8-18 ab.

A replacement screw used to secure panels and components in compatible GE appliances. Replacing missing or damaged screws restores secure mounting, reduces rattling, and helps keep parts aligned during normal operation. What it does:

• Fastens panels, trim, brackets, or small appliance components to maintain proper alignment and fit.
• Keeps internal parts secured to reduce vibration, rattling, or movement during use.
• Replaces stripped, rusted, or missing hardware that can cause loose or misaligned panels.
• Small, non-electrical part — does not affect electrical circuits or controls.

• Disconnect power and unplug the appliance before accessing internal parts.
• Use the properly sized screwdriver to avoid stripping the head; hand-start threads to prevent cross-threading.
• Tighten securely but avoid over-torquing; overtightening can strip threads or damage plastic components.
• Keep track of small parts and hardware; replace any damaged or mismatched screws with the correct OEM part.

This electric pressure switch senses pressure changes and sends a signal to the appliance control, restoring reliable pressure detection and normal operation. Use it when the machine fails to detect pressure or shows pressure-related errors. What it does:

• Detects changes in air/water pressure and converts them to an electrical signal for the control board
• Helps the appliance recognize correct fill, drain, or airflow conditions
• Commonly linked to symptoms such as failure to start, not filling, running continuously, or pressure-related error codes
• Replaces a failed or intermittent pressure-sensing component to restore expected cycling behavior

• Disconnect power before attempting any service to avoid shock or damage
• Label and photograph wiring before removal to ensure correct reconnection
• Test with a multimeter if troubleshooting

This supports assembly stabilizes and supports the washer's internal moving components, keeping them properly aligned to control vibration during wash and spin. Replacing a worn support can restore smoother operation and reduce excessive shaking or noise. What it does:

• Supports and stabilizes the tub/drive system during agitation and spin
• Helps absorb vibration to minimize shaking, banging, and noise
• Maintains proper alignment to prevent rubbing or scraping
• Typical failure signs: excessive vibration, out-of-balance interruptions, knocking sounds, or the washer "walking"

• 1 supports assembly

• Disconnect power and water before servicing; wear gloves and eye protection
• Access the assembly by removing the appropriate cabinet/top or front panel per your model's service information
• Safely support the tub/drive to relieve load before removing fasteners and swapping the assembly
• Transfer any model-specific brackets or hardware as needed; the washer is level before test run

This replacement motor strap secures the dryer's drive motor to its mounting bracket so the motor and blower stay aligned and stable, helping reduce vibration and noise for smoother operation. What it does:

• Holds the drive motor firmly to the base/bracket
• Maintains proper alignment of the motor and blower wheel to prevent rubbing
• Helps reduce vibration, rattling, and related noise
• Typical signs of failure: increased vibration, rattling, scraping from the blower area, or a motor that feels loose inside the cabinet

• Includes 1 motor strap

• Disconnect power; for gas dryers, also shut off gas supply
• Access the motor assembly; note the strap's routing/orientation before removal
• Support the motor while releasing the strap to avoid stressing wiring and mounts
• After securing the strap, rotate the drum/blower by hand to verify free movement before reassembly

Restore a proper seal at the top of your washer's tub with this tub cover assembly. It contains water and suds, reduces splashing, and provides a smooth rim to protect garments during wash and spin. Also called a tub ring.

• Seals the top of the outer tub to keep water and suds contained during operation
• Provides a smooth basket opening to help prevent fabric snagging
• Helps maintain stable operation; a cracked or loose cover can rub, vibrate, or leak
• Common symptoms: water or suds at the top of the tub, excessive splashing, visible cracks or broken tabs

• Disconnect power and turn off water supply before servicing
• Lift/remove the washer top to access the tub area; release clips/fasteners holding the old cover
• Clean the tub lip and transfer any reusable components from the old cover if applicable
• Seat the new cover evenly and secure all tabs/clamps; run a leak check

The ball joint seat is the plastic socket for the washer's suspension rod ball. It supports the tub and allows smooth pivoting, helping control vibration and noise when the original seat becomes worn, cracked, or deformed.

• Provides a low-friction seat for the suspension rod ball
• Helps stabilize the tub and isolate vibration during wash and spin
• Wear can cause squeaks/creaks, knocking/banging, or a leaning/off-center tub
• Restores proper suspension movement for smoother, quieter operation

• Disconnect power and water supply; wear gloves and eye protection
• Support the tub before releasing spring/rod tension
• Access the suspension support per model; release the rod from the old seat and install the new seat fully into place
• Ensure the ball end is fully seated before reassembly and testing

This selector switch is the console control that lets you choose washer options. It routes power to the appropriate circuit so the setting you pick—such as temperature or speed—engages reliably during the cycle.

• Interfaces with the control knob to communicate user-selected options to the washer's control
• Common fix when options won't change or only one setting works
• Helps resolve intermittent response or dead spots when turning the selector
• Restores consistent operation of user-selected wash features

• Disconnect power to the appliance before servicing
• Access the control console; remove the rear cover or screws as required
• Note wire positions and transfer connectors to the new switch one at a time
• Secure the switch, reinstall the knob/panel, and test each selection

Size: 8-32 t. Includes 12 screws.