Gtw330askww Parts

This GE Ball Joint Upper is an OEM part for GE washing machines. Designed to ensure smooth and stable movement of the washing drum, this ball joint plays a crucial role in the appliance's suspension system. 

A compromised ball joint can lead to a decline in the performance of the washing machine, making it essential to address the issue promptly.

Symptoms of a bad Ball Joint Upper include:

• Unusual noises during operation, especially during the spin cycle.
• The drum may seem to wobble or be off-balance.
• Excessive vibration of the machine, more than usual.
• Uneven wear of other suspension parts, leading to further maintenance issues.
• Potential leakage or damage to surrounding components due to misalignment.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Large Lid is an OEM replacement part for GE washers. It is designed to fit and cover the opening of the washer drum interior. This large lid ensures a secure closure during the washing cycle, preventing accidents, water from splashing out and keeping your laundry contained.

A bad large lid can be caused by normal wear and tear over time or accidental damage. If you notice cracks, discoloration, or any other damage to the lid, it is recommended to replace it.

Symptoms of a faulty large lid include:

• Water leaking or splashing out of the washer drum
• Difficulty in closing or sealing the lid properly
• A loose or wobbly lid

Restore your GE washer by replacing the old or damaged large lid with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Start Capacitor is an OEM part for GE washing machines. It is comprised of a bracket and capacitor, which work together in the motor control circuit to start and run the drive motor. The capacitor provides a phase shift that allows for smoother operation of the electric motor.

Symptoms of a bad Start Capacitor include:

• The washer fails to agitate or spin clothes
• An electric burning smell coming from the motor or control board  
• The drive motor makes buzzing or humming noises during the operation

Causes of failure can be normal component degradation over time. Exposure to moisture, physical damage, or operating the machine with an unbalanced load can also stress the capacitor prematurely. 

This OEM GE part is also compatible with Hotpoint, RCA, and select Kenmore models.

The External Drain Hose is an OEM part for GE washers. It is responsible for directing excess water from the washer out of the home during the drain cycle. The external drain hose connects from the bottom of the washer to an external drain point, such as a standpipe, drain pump, or utility sink. 

Causes of a bad external drain hose can include cracks, leaks, or holes developing over prolonged use. Mineral buildup or contaminants inside the hose can also cause blockages.

Symptoms of a bad external drain hose include: 

• Water failing to drain or draining slowly during the cycle 
• Puddles or flooding occurring near or beneath the washer
• Strange draining noises or sounds emanating from the hose

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Leveling leg is an OEM component specifically designed for GE washing machines. This accessory provides stability for the entire unit during operation. 

Symptoms of a bad Leveling leg can include:

• Excessive tipping or leaning of the washer during operation   
• Walks or moves across a tile floor while operating  
• Deterioration like rust developing or cracks appearing

Causes involve long-term exposure to vibration and cycles of weight variations inside the washer. Over time, wearing down can potentially compromise support.

This GE replacement part is also compatible with Hotpoint, RCA and select Kenmore models. 

The Spring is an OEM part for GE front-loading washing machines. It is responsible for assisting with the opening and closing of the washer door during the loading and unloading of clothes.

Causes of a bad spring can include cracks or fractures from repeated flexing over thousands of cycles. Stress and damage from excessively heavy loads or forced/slammed door movements can hasten spring failure.

Symptoms of a failed spring include:

• The door being hard to open/close or moving too freely
• An inability to hold the door securely closed
• Unnecessary noise and vibration from the door

Replace the worn spring with this genuine GE OEM part to restore proper function and balance to the door. It is designed for precise performance and durability. This replacement is also compatible with some Kenmore machines using GE components.

The Power Cord is an OEM part for GE washers. It provides the crucial connection, transmitting electrical current from the wall outlet to power the washer components and functions. Ensuring the integrity of this cord is vital for safe and reliable operation. 

Symptoms of a bad power cord include:

• Frayed, cracked, or exposed copper wiring 
• Loose connections at either end
• Buzzing, sparks, or shocks felt around the cord
• The washer fails to power on as expected

Causes can be normal flexing wear over thousands of cycles, damage from pinching, rodents, or excess tension on the cord. 

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This washer control knob assembly replaces the main cycle selector knob. Swap a cracked or loose knob to restore precise, reliable selection of wash cycles and settings.

• Attaches to the selector shaft to set wash cycles and options
• Fixes issues such as a cracked hub, stripped insert, or knob that falls off
• Symptoms include free-spinning or loose knob, difficulty turning, or inability to select a cycle
• Restores positive engagement and control feel

• Disconnect power to the washer before servicing
• Pull the old knob straight off; gently wiggle if needed to release
• Align the flat/D-shaped side of the new knob with the shaft and press firmly until fully seated
• If the knob won't seat or stay on, inspect the selector/timer shaft for damage

The Bleach Cup is an OEM component specifically designed for GE top-load washing machines. It provides centralized bleach dispensing during wash cycles. 

Located at the lower rear of the tub interior, this small plastic cup features a perimeter vent design. It holds liquid bleach to permeate laundry as needed, then rinses away fully before spinning. Proper cup placement prevents unwanted coloring or bleaching of inner tub surfaces. 

Causes of issues include stretching/cracking from chemicals over time or accidental impacts disrupting vent placement.

Symptoms of a bad bleach cup:

• Bleach stains or residue accumulating inside the tub  
• Bleach not fully washing away after dispensing
• Cup detaching during agitation cycles

Replacing with this authentic GE OEM part restores optimized dispensing. It helps fabrics receive full bleaching benefits without damage to washer components. Compatible units include select Hotpoint, RCA, or Kenmore top-load models.

The SELECTOR SWITCH is an OEM component specifically designed for GE washers. It is an electrical switch located inside the control panel that allows the user to toggle between various wash cycles like normal, heavy-duty, and spin. The selector switch directs power and programming to the proper cycles upon input from the control buttons. 

Causes of a bad selector switch can include wear and tear of internal contacts and mechanisms over extended use, failures in soldering or electrical connections, or damage from water damage inside the control panel area.

Symptoms of a bad selector switch include:

• The washer only operates on one continuous cycle regardless of button input  
• Multiple cycles activating simultaneously in a random manner
• Inability to toggle effectively between options like temperature levels
• Error codes or strange electrical noises occurring 

This GE replacement part is compatible with Hotpoint, RCA, and select Kenmore models.

This is a self-tapping Plastite screw with a hex washer head and a 5/8 in. length that secures plastic and thin-sheet components. Use it to replace missing or damaged mounting screws for a snug, reliable fit. What it does:

• Forms threads in plastic (Plastite style) to fasten panels, brackets, and trims.
• Hex washer head provides a larger bearing surface for better holding power.
• Replaces stripped, corroded, or missing screws to stop loose or rattling parts.
• Works where a self-tapping screw is required for secure mounting without a separate nut.

• Use the correct hex/nut driver and a properly fitting bit to avoid stripping the head.
• Hand-start the screw and drive straight to prevent cross-threading; stop when snug—do not overtighten into plastic.
• Unplug the appliance or shut off power before disassembling or working near electrical components.
• Replace with the same screw type and size to maintain proper fit and function.

LID BUSHING LEFT

LID BUSHING RIGHT

This belt protector is a replacement cover that shields the dryer drive belt and nearby components from damage, helping maintain smooth drum rotation and prevent premature belt wear. What it does:

• Covers and protects the dryer drive belt from contact with the cabinet and foreign objects
• Helps prevent belt fraying and rubbing that can cause noise or reduced performance
• Keeps lint and debris away from the belt path to reduce overheating risk
• Supports proper belt routing for consistent drum movement

• Disconnect power to the appliance before starting any repair
• Access typically requires removing the dryer top or rear panel—use basic hand tools
• Inspect the drive belt and idler for wear while the protector is off; replace if damaged

This left-side wireform hinge secures and guides a top lid, restoring smooth opening and stable closure for affected appliances. It replaces a bent or worn hinge to reduce sagging, uneven gaps, and noisy or sticky lid movement. What it does

• Supports the lid on the left side and keeps it aligned during open/close cycles
• Restores smooth pivoting when the original hinge is bent, stretched, or broken
• Helps eliminate lid sag, uneven gaps, or rubbing against the cabinet
• Reduces rattling or binding caused by a damaged wireform hinge

• Disconnect power to the appliance before starting repairs to avoid injury
• Basic hand tools typically required; remove any trim or screws securing the old hinge
• Align the new hinge carefully and test the lid travel before fully tightening fasteners