Gtwn280d1ww Parts

This badge is the external logo emblem that restores the appliance's factory appearance and identification. It replaces a missing, faded, or damaged emblem to keep the cabinet looking finished. What it does

• Covers the designated badge location on the appliance exterior for a factory-fresh look
• Replaces worn, cracked, or faded logos that affect appearance
• Helps identify original equipment styling for resale or cosmetic repair
• Matches the original shape and finish to maintain visual consistency

• One (1) badge emblem

• Installation method varies by model—may press into place, secure with clips, or adhere; your model's service instructions
• Clean and dry the mounting surface before installing to ensure proper fit and adhesion
• Use common hand tools only; avoid excessive force to prevent scratching or damaging surrounding surfaces
• Disconnect power or follow manufacturer safety recommendations if working near electrical controls

This short wireform hinge secures and guides a door or panel so it opens and closes smoothly. It restores proper alignment and reduces binding or sag that can prevent a door from seating correctly. What it does:

• Provides pivot support for a door or access panel to maintain correct motion and alignment
• Replaces bent, worn, or broken hinge hardware that causes uneven closing or door sag
• Reduces noise and binding during opening/closing when the original hinge has lost shape
• Works with existing hinge mounts and fasteners when in good condition

• One short wireform hinge

• Designed for straightforward replacement; verify correct hinge orientation before removing the old part
• Use appropriate hand tools and keep fasteners organized for reassembly
• Disconnect power or gas and follow appliance safety instructions when replacing hinges on powered appliances
• Address those issues before installing the new hinge

Size: 8-18 b.

The Triple Water Valve is an OEM part for GE washing machines. This part controls the flow of water into the washer, allowing for the precise mixing of hot, cold, and warm water necessary for different wash cycles.  

Causes of a bad triple water valve can include mineral buildup or blockages from debris, electrical issues such as faulty solenoids, and wear and tear from frequent use.  

Symptoms of a bad triple water valve include:

• The washer not filling with water or filling very slowly
• Incorrect water temperature during wash cycles
• Leaks from the valve area
• The washer not advancing through cycles properly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This double-style hinge bushing supports the washer lid hinge pin and provides a smooth bearing surface. Replacing a worn bushing restores quiet, even lid movement and helps keep the lid properly aligned over time.

• Supports and centers the lid at the hinge
• Provides a low-friction bearing surface for the hinge pin/rod
• Helps reduce squeaking, looseness, and metal-on-metal wear
• Can help resolve a wobbly, misaligned, or scraping lid

• Disconnect power before servicing; support the lid to prevent dropping
• Remove the hinge pin/rod or screws as your model requires to access the bushing
• Pry out the worn bushing and press the new bushing fully into the hinge opening
• Reassemble and check lid operation; consider replacing the opposite-side bushing if worn

Secure your washer's drain hose with this drain hose strap. It keeps the hose positioned at the standpipe or laundry tub, helping prevent movement, dislodging, and messy leaks when vibration increases during drain and spin cycles.

• Secures the drain hose to a standpipe or utility sink, per installation guidelines
• Helps prevent the hose from backing out or spraying water during operation
• Reduces strain and kinking by keeping the hose routed in place
• Replaces a missing, cracked, or broken strap

• Unplug the washer and turn off water supply before starting
• Position the drain hose in the standpipe or tub and tighten the strap to secure it without kinking the hose
• Maintain the manufacturer-recommended air gap and hose height per your installation manual
• Run a quick drain/spin to ensure the hose stays secured and there are no leaks

This backsplash assembly replaces a damaged or worn backguard on your range or oven, restoring the appliance's rear trim and protecting the wall behind it. It returns a finished look and proper support for controls and wiring cover. What it does:

• Covers and protects the rear upper area of the range/oven, hiding wiring and mounting points
• Restores a finished appearance when the original backsplash is dented, cracked, or discolored
• Provides mounting surface for control panels and associated trim pieces
• Helps prevent grease and splatter from reaching the wall behind the appliance

• Disconnect power to the appliance before starting — this part sits near control wiring.
• Remove the range/oven from the cabinet opening as needed for access; two people may be required for safe handling.
• Use existing mounting hardware if service instructions do not list included fasteners; follow OEM instructions for proper alignment.
• Wear gloves to protect against sharp metal edges and avoid damage to finish during installation.

This tub clamp secures the washer tub or associated hoses to keep components aligned and sealed during operation. It replaces a worn or broken clamp to reduce movement and help prevent leaks and noise. What it does:

• Holds the tub/hose connection or tub assembly parts together to maintain a tight fit
• Helps prevent leaks caused by loose or damaged clamps
• Reduces rubbing, vibration, and associated noise from a loose tub assembly
• Restores proper component alignment after clamp failure

• Disconnect power and turn off water supply before starting any repair
• Inspect mating parts (tub, hoses, mounting points) for damage and clean before installing
• Use appropriate clamp pliers or screwdriver as required; ensure clamp is seated and tightened evenly

This balance ring assembly helps stabilize the washer tub during spin cycles to reduce vibration and noisy operation. Replaces a worn or damaged counterweight to restore smoother, more balanced spinning. What it does:

• Acts as a counterweight around the washer tub to help reduce vibration and wobbling during high-speed spins
• Helps decrease noise caused by an unbalanced load or damaged tub support
• Can prevent excessive movement that may cause wear to suspension components
• Commonly replaced when you see persistent shaking, loud knocking during spin, or visible damage to the ring

• One balance ring assembly

• Designed for use with compatible top-load washer tubs; confirm fit for your model before ordering
• Basic mechanical skill and common hand tools required; larger repairs may require tub removal
• Disconnect power and water supply before starting any repair to avoid injury or damage

5/16-18 tpt ihw s n

A small push-in plug button used to fill or cover an access hole or trim opening and restore a finished appearance. Designed to snap into place for a secure fit and to keep dirt and moisture out. What it does:

• Covers unused holes or fastener openings to restore a finished look
• Helps keep dirt, moisture, and debris from entering cavities
• Holds trim or panels flush by filling gaps where a fastener or post is missing
• Commonly replaced when cracked, lost, loose, or causing rattles or gaps

• One plug button

• Disconnect power to the appliance before accessing panels or trim
• Typically snaps into place—press firmly until seated; may require removing trim for access
• Avoid prying with sharp tools that can damage surrounding surfaces
• Replace only with the exact part number to ensure proper fit and finish