Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Gtwn42501ws Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Thrust Washer
Genuine Ge part
By: Ge
Part Number: WH02X10283

This thrust washer is a small wear component used in washers to maintain proper spacing and smooth rotation between mating parts in the drive system. Replacing a worn washer helps reduce friction, noise, and premature wear.

  • Maintains clearance and alignment between rotating components
  • Reduces friction to support smooth agitation and spin
  • Helps prevent squeaking/scraping noises and binding during cycles
  • Replaces a cracked, worn, or missing washer that can cause excess play
What's included: 1 thrust washer. Install notes:
  • Disconnect power and turn off water before servicing
  • Access the drive/agitator area per your model's service information
  • Match the original washer's placement and orientation during reassembly
  • Inspect related spacers, bushings, or couplers and replace if worn

Do-It-Yourself Stories from Customers like You Rattling mode shifter & shaft assembly bearing.   Nick R. • Fontana , CA • June 14, 2019

Originally thought, based on reading and reviews, the banging was coming from a bad dampening strap. After a quick replacement, the noise was better but not completely fixed. Two loads later, the noise became ten times worse. Further investigation led to seeing the bearing on the Mode Shifter and Shaft Assembly was blown out. As another reviewer said, I think ultimately this is a result of a miniscule leak in the tub seal over time, rusting out the bearing and eventually causing it to go. ... Read more

More
Washer Main Control Board
Genuine Ge part
By: Ge
Part Number: WH12X10475

Fix a washer that won't start, is stuck in a cycle, or won't progress through wash modes. This main control board manages timing and operation. 15-minute DIY fix.

Do-It-Yourself Stories from Customers like You Machine was stuck in diagnostic mode   Phillip M. • Fort Lauderdale , FL • October 02, 2014

I changed the control board Read more

More
Probe Sensor Atc
Genuine Ge part
By: Ge
Part Number: WH12X10410

The Probe Sensor (ATC) is an OEM replacement part for GE washers. It plays a key role in monitoring water levels and temperatures during cycles.

Symptoms of a bad probe sensor include:

  • Incorrect or inconsistent fill levels
  • Fluctuations in water temperature
  • Delays or failures at the start of cycles
  • Error codes related to lack of temperature/level readings

Causes can include normal wear over time as the delicate internal components are subjected to constant temperature changes and immersion in water. Mineral deposits or contaminants may also affect performance.

This GE replacement is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Gtwn4250d1ws perfectemp auto temp control not working   Laurence H. • Greenwich , CT • January 01, 2017

Opened the control panel to find a very useful service instructions sheet which explained the self-diagnosis mode. Ran that mode suspecting the ATC thermistor and indeed it showed a thermistor fault. The sheet explained how to dismantle the front and top covers to access the ATC probe - resistance measurement was only 1.2 kOhms at room temp (should be 47 kOhms). Ordered ATC probe from this site for GTWN4250D0WS (slightly different model but looked identical). Arrived next day - fantastic... Read more

More
Funnel Bleach
Genuine Ge part
By: Ge
Part Number: WH01X10057

 

Do-It-Yourself Stories from Customers like You Broken bleach funnel   Richard M. • Huntsville , AL • April 10, 2018

Took out the broken one and snapped the new one in , done. Read more

More
Hose Drain Asm
Genuine Ge part
By: Ge
Part Number: WH41X25457

 

Do-It-Yourself Stories from Customers like You Drain hose   Roger L. • Port Charlotte , FL • February 06, 2017

Replaced Read more

More
Funnel Shower Head
Genuine Ge part
By: Ge
Part Number: WH41X10206

 

Do-It-Yourself Stories from Customers like You Leak while filling tub   Norman T. • Osprey , FL • February 19, 2021

Replaced the filler funnel, the hose between the water valve and the filler funnel split. Read more

More
Board Asm Mounted
Genuine Ge part
By: Ge
Part Number: WH12X10524

 

Do-It-Yourself Stories from Customers like You Intermittent cycle disruption; dump all water in the middle of a cycle; sometimes all lights on but no operation   Joseph E. • Lemont , IL • September 16, 2016

After part arrived, Unplugged unit from power outlet and removed 3- 1/4" head screws from back of panel, lifted off control cover. Took picture of existing connection, Remove and swap over the jumper connector from one side of circuit board. Carefully disconnected wire connections (some have squeeze clips). Remove all knobs from switches at front of panel. Remove 4- 5/16" head screws which were retaining board on to panel. Lift off old panel. Reverse process to reassemble. Pretty straight... Read more

More
Drain Hose
Genuine Ge part
By: Ge
Part Number: WH41X374

The Drain Hose is an OEM part for GE washing machines. It is specifically designed to channel used water out of the washer and into the household drainage system. 

Causes of a bad drain hose can include physical damage from movement or installation, clogging from lint and debris, or degradation of the hose material over time, leading to leaks and inefficiency.

Symptoms of a bad Drain Hose include:

  • Water leaking from the back or underside of the washing machine
  • Pools of water around the area where the washing machine is installed
  • Signs of wear or damage to the hose, such as cracks, holes, or bulging

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Have water leak   Carl W. • Hopkins , MI • June 26, 2015

I did it Read more

More
Washer Outer Tub Cover
Genuine Ge part
By: Ge
Part Number: WH49X21274

Outer tub cover that snaps over the washer's outer tub assembly. Replace if cracked, broken, or missing to restore proper clearance and protection.

Do-It-Yourself Stories from Customers like You Washer tub straps and part of cover tub broke   Edwin B. • Chicago , IL • October 13, 2014

I had to remove the front panel of the washing machine and top of the washing machine. i started by removing all the top screws as shown in one of videos. disconnected all the electrical wires (i have a commercial washer) and lifted the front panel over the back of the machine. i was then able to remove the top of the washing machine to give me access to the tub straps and the corresponding screws. i removed the broken straps and then was able to remove the tub cover by pushing down it down... Read more

More
Washer Motor And Inverter Assembly
Genuine Ge part
By: Ge
Part Number: WH20X10066

Washer won't spin or agitate? This motor and inverter assembly controls basket rotation and spin speed. Moderate DIY repair, 1-2 hours with tech sheet.

Do-It-Yourself Stories from Customers like You Flashing fill light with beep flashing 10 on motor card   Barry R. • Hummelstown , PA • August 22, 2016

It's always a tough decision on how much time and money to spend on an older $500 appliance. Besides fixing things being in my nature, Appliance Parts policy of allowing returns for any reason made the decision a lot easier. My 2+hour project time was due to lots of research and analyses trying to pin-point the exact cause. It still came down to a toss up between the control card and the motor. The control card did not fix, the motor did. Part replacement was in the 15 - 30 minute range. A... Read more

More
Cord Power Asm
Genuine Ge part
By: Ge
Part Number: WH19X10068

 

More
Wireform Hinge (Long)
Genuine Ge part
By: Ge
Part Number: WH1X2743

 

More
Washer Shipping Bar
Genuine Ge part
By: Ge
Part Number: WH46X344

This shipping bar was installed during appliance transport to secure moving parts and prevent damage. It should be removed before first use to allow proper operation of your washer's door mechanism. Remove this bar if your washer door won't open properly or if you hear rattling noises during operation.

More
Clamp Tub Outlet
Genuine Ge part
By: Ge
Part Number: WH01X10134

 

More
Terminal Housing
Genuine Ge part
By: Ge
Part Number: WH12X497

Harness to corset & shifter

More
Washer Balance Ring Assembly
Genuine Ge part
By: Ge
Part Number: WH45X10114

Counterweight ring that stabilizes the washer tub. Replace if cracked, leaking fluid, or damaged from friction wear to restore balanced spinning.

More
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google