Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures interior panels and trim to prevent vibration and movement. Replace when clips break or lose grip. Verify fit with your model number.
This kit includes hose clamps and fasteners used during dishwasher installation to secure the drain hose and water supply connections. It ensures tight, leak-free connections between the dishwasher and household plumbing. Replace this kit if you notice water leaking at hose connections or if clamps are corroded, broken, or missing during a new installation or reinstallation.
I bought the part from AppliancePartsPros.com. Removed water inlet hose. Removed water outlet hose. Removed water inlet valve which was held on with one screw. Replaced the water inlet value. Reattached both hoses. It leaked a little bit, so I had to put plumbing tape and really make it tight. Then the leaked stopped. Read more
Replacement screw secures internal panels, brackets, and components in dishwashers. Replaces lost, stripped, or damaged fasteners during repair work.
Replaced the ebox cover discarded by the previous owner. Read more
Right-hand door hinge that restores proper door alignment and smooth operation. Replace if your dishwasher door sags, binds, or won't stay open. Verify fit.
Ordered the part via your chat service, excellent service!! install was completely smooth, exact part i needed after my children, while wrestling, fell on the open dishwasher door and bent it such that it wouldn't hold the bottom tray without it rolling onto the floor. Like brand new!! Thanks! Read more
The Thermostat Clip is an OEM part for Whirlpool dishwashers. It plays an important supporting role by securely fastening the thermostat sensor inside the wash chamber.
Symptoms of a faulty Thermostat Clip can include:
Causes could arise from typical wear and tear stresses weakening plastic retaining clips. Exposure to harsh detergents may also erode clip material integrity over time.
This OEM replacement part is compatible with KitchenAid, Jenn-Air, Kenmore, and select Hotpoint and Roper dishwasher models as well.
Replacement mounting screw for dishwashers. Secures internal components and panels. Order a new screw if yours is stripped, missing, or damaged.
Shield for dishwashers. Protects internal components from water and debris. Replace if cracked, broken, or missing to maintain proper coverage.
This is a small plastic or rubber fitting that secures the power cord where it enters the dishwasher's junction box or base. It prevents the electrical wiring from being pulled, kinked, or damaged by absorbing tension on the cord. Replace this part if it is cracked or missing, which can leave wiring exposed and vulnerable to damage during installation or use.
Perfect thanks. Read more
Dispenser won't latch or close? This detergent dispenser releases soap at the right time. Moderate DIY repair requiring inner door panel removal.
I ordered the part, looked at a YouTube instructional video on how to do it, and did it myself. It wasn't too hard, and I have no experience. I received the part very quickly! Read more
Usually ships within 4 - 14 days
Fix water leaking from under your dishwasher with this pump volute. Directs water flow and prevents leaks with integrated seal. 20-minute repair.
I reviewed the schematic and saw the Volute Seal, and Impeller Seal were the two that were closest my source of water. After watching the video about changing the Impeller/seal I removed the motor, impeller, and volute; I found that the impeller seal was the faulty one in my case. Since I'd ordered the volute and impeller seal kits (as I wasn't sure which it was) I installed both while I had it apart. Runs great, no water - simple to do. The seal changes took about 20 minutes. The only... Read more
This hose clamp secures dishwasher hoses to fittings and ports to maintain a tight, leak-resistant seal. Replacing a worn clamp helps prevent drips and loose connections that can cause water under the unit.
Secures the inner water tube assembly in your dishwasher. Replace if cracked, loose, or leaking. Rotates clockwise for removal. Verify fit with model.
Insulation pad that fits behind dishwasher panels to restore thermal protection and reduce noise. Replace if damaged, missing, or rattling occurs.
This is the lower spray arm assembly that sits at the bottom of the dishwasher tub and rotates during the wash cycle to spray water onto dishes. It distributes pressurized water through small nozzle holes to clean the items on the lower rack. Replace this arm if dishes on the bottom rack are not getting clean, if the spray holes are clogged or damaged, or if the arm is cracked and no longer spins freely.
Watche videos on their website - very good! Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.