Gud24gssmoww Parts

This 1/4-20 Taptite hex washer-head screw secures panels and internal components in your appliance. Its thread-forming design creates a tight, vibration-resistant hold in untapped metal to keep assemblies aligned when a fastener is missing or stripped.

• Fastens brackets, panels, and hardware to the cabinet/frame
• Taptite design forms threads in pre-punched, untapped holes for a secure fit
• Replaces missing, stripped, or rusted screws
• Helps reduce vibration and rattling from loose mounts

• Unplug the appliance; if servicing a washer, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the appropriate nut driver or socket until snug—do not overtighten

This is a hex pan thread screw used to secure appliance panels and components. It replaces missing or damaged fasteners to restore proper fit and reduce vibration or rattling. What it does

• Secures panels, brackets, or components to the appliance frame
• Restores tight fit where a worn or missing screw caused loose panels or rattling
• Provides a hex head drive for easy tightening with the correct socket or bit
• Matches OEM fastening points when replacing the original screw

• One hex pan thread screw

• Use the correct hex socket or driver to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or damage components
• Disconnect power or follow appliance safety procedures before servicing
• Keep removed hardware organized to confirm correct replacement

This bracket connector is a small metal mounting bracket that secures wiring or components inside the appliance, restoring stable alignment and connection points. It helps stop loose wires or parts from shifting and reduces intermittent electrical contact. What it does

• Provides a secure anchor point for wiring harnesses or small components
• Prevents strain on electrical connections that can cause intermittent operation
• Keeps internal parts aligned to reduce rattle and wear
• Replaces a damaged or missing mounting bracket to restore factory fit

• Inspect surrounding wiring and fasteners; replace any damaged clips or screws.
• Secure bracket with the original screws or the correct-size fasteners; do not overtighten.
• Disconnect power before accessing internal components to avoid shock or injury.

The Mode Shifter Assembly is an OEM part for GE washer/dryer units. This part is responsible for shifting between different modes such as washing, spinning, and drying. The mode shifter ensures smooth and accurate shifting, allowing for seamless transitions between the various modes of your GE washer/dryer. It engages and disengages the mode shifter mechanism, ensuring that the appropriate functions are activated at the right times.

A bad mode shifter actuator can occur due to wear and tear, mechanical failure, or electrical issues. If you notice symptoms such as the washer/dryer not shifting modes properly, unusual noises during operation, or error codes indicating a faulty actuator, it may be time to replace the component.

Symptoms of a bad mode shifter actuator include:

• Improper shifting between modes
• Unusual noises during operation
• Error codes indicating a faulty actuator

Restore the smooth operation of your GE washer/dryer by replacing the faulty mode shifter actuator with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Drain Pump is an OEM part for GE washing machines. It works to remove water from the washer tub at the end of each cycle.

Causes of a bad drain pump can include blockages in the pump mechanism from built-up debris or damage from attempts to manually clear obstructions. Wear over time may also affect pump function.

Symptoms of a bad drain pump include:

• Washer failing to fully drain water after cycles
• Excessively long drain times
• Water remaining or collecting in the bottom of the tub
• Potential leaks or overflow issues

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

The Tub Cover is an OEM component for GE front-load washing machines. It provides a protective barrier around the inner tub and mechanism while blending into the washer design.

Causes of a faulty tub cover can include cracking, bending, or warping from repeated use over several years. Excessive exposure to moisture or impacts can accelerate damage. 

Symptoms of a bad tub cover include:

• Water leaks inside or outside the washer during operation
• Unsecure door closure or door alignment issues
• Visible dents, cracks or punctures in the plastic material

This tub cover replacement is also compatible with models by Hotpoint, RCA, and some Kenmore brands.

This control knob assembly restores a solid, easy-to-grip selector on your appliance's console so you can accurately choose cycles and settings. It replaces broken or stripped knobs that slip, wobble, or fall off the control shaft.

• Attaches to the control/timer shaft so you can turn and set functions
• Replaces cracked, missing, or hub-stripped knobs
• Helps resolve free-spinning knobs or knobs that won't stay on
• Maintains correct shaft engagement and a clean, finished console appearance

• Disconnect power before servicing
• Pull the old knob straight off; avoid prying against the console
• Align the new knob with the flat/splined shaft and press until fully seated
• Inspect the shaft for wear or damage before forcing

This washer agitator and bolt kit replaces the central agitator and secures it to the drive shaft, restoring proper wash action so clothes roll and turn over through the water for consistent, effective cleaning.

• Produces the back-and-forth motion that moves laundry for turnover and soil removal
• Secures the agitator to the drive shaft with the included mounting bolt
• Common symptoms: no or weak agitation, poor cleaning results, agitator loose or free-spinning, clicking during wash
• Addresses worn or stripped agitator splines or a missing/loose mounting bolt

• Disconnect power and turn off water; wear gloves for protection
• Remove the dispenser and cap to access the agitator bolt
• Lift off the old agitator; align the new agitator on the shaft and start the bolt by hand to avoid cross-threading
• Tighten the bolt securely, reinstall caps, and run a quick test cycle to confirm proper agitation

This start button assembly is the external pushbutton on the dryer console. It lets you begin a cycle; replacing a broken or missing button restores proper engagement of the start switch and a clean, factory appearance.

• Provides the physical Start control on the console and actuates the underlying switch
• Replaces a button that is cracked, missing, loose, or won't stay in place
• Helps when the dryer won't start because the button can't press the switch
• Restores smooth, reliable button travel and appearance

• Disconnect power; if gas, shut off gas supply before moving the appliance
• Access the console, remove fasteners, release tabs, and remove the old button assembly
• Transfer any small hardware from the original as needed; align and secure the new button
• Reassemble, restore power, and test for proper button movement and start engagement

This agitator screw secures the washer's agitator to the drive hub/shaft. Replace a missing, stripped, or rusted screw to restore a tight, stable agitator and proper wash action while helping prevent wobble and rattling during cycles.

• Fastens the agitator to the drive hub/shaft
• Keeps the agitator from lifting or wobbling
• Helps maintain consistent agitation and wash performance
• Typical symptoms: loose or wobbly agitator, rattling/clicking during agitation, reduced cleaning results

• Disconnect power before servicing the washer
• Remove the agitator cap or fabric softener dispenser to access the screw
• Use an appropriate driver or socket; avoid cross-threading and overtightening
• Ensure the agitator is fully seated before tightening; reinstall the cap/dispenser

This motor pulley and nut kit replaces a worn or damaged drive pulley on a washing machine's motor, restoring proper belt engagement. A true, undamaged pulley helps ensure reliable agitation and spin without slippage or squeal.

• Mounts on the motor shaft to drive the belt for wash and spin cycles
• Worn grooves or wobble can cause belt slippage, squealing, or a burning rubber smell
• Failure may present as slow/no spin or weak/intermittent agitation
• Restoring the pulley helps maintain correct belt tracking and reduces premature belt wear

• Unplug the appliance and disconnect water; wear gloves and ensure stable access to the motor
• Remove the belt, hold the motor shaft, then remove the old nut and pulley
• Clean the motor shaft; seat the new pulley fully and install the new nut, tightening securely
• Reinstall and align the belt; rotate by hand to verify tracking before reassembly and testing

The Kit Tub 24 Hub Nut Washers & Agitator is an OEM set of components specifically designed for GE top-load washing machines. It includes vital agitator and suspension assembly items.

Located inside the washing machine tub, these parts work together to enable smooth oscillations during each wash cycle. The agitator transfers rotational force into controlled linear movements while properly guiding clothing through machine-pressurized water. 

Causes of bad kit items relate to wear from repeated use, inadvertent impacts from large loads, or normal aging of plastic materials over 10+ years.

Symptoms include: 

• Excessive tub vibration or noise during agitation  
• Loose or wobbly agitator movement inside the tub
• Premature bearing or suspension wear evident

  
Replacing with this authentic GE OEM kit restores optimized agitation for thorough cleaning results. Compatibility includes select Hotpoint, RCA, or Kenmore top-load washer models as well.
 

This exhaust gasket seals the dryer's exhaust duct connection to contain airflow and keep lint out of the cabinet. A tight seal helps maintain drying performance and efficiency while reducing warm, moist air leakage behind the unit.

• Seals the joint between the exhaust duct and outlet/blower housing to prevent air and lint leaks
• Helps maintain proper airflow for consistent drying results
• Wear or damage can cause longer dry times and warm, humid air or lint behind the dryer
• Visible tears, flattening, or missing sections indicate the gasket should be replaced

• Disconnect power; turn off gas supply for gas models before servicing
• Pull the dryer forward, disconnect the vent, and remove panel(s) as needed to access the exhaust connection
• Remove the old gasket and residue; clean mating surfaces; seat the new gasket evenly
• Reassemble, reconnect the vent, ensure the external vent is clear, and check for air leaks

The Baffle is an OEM part for GE electric dryers. Located inside the dryer drum, it helps separate clothes and improves air circulation during tumbling cycles. 

To achieve consistent drying times, a dryer relies on balanced airflow penetrating all areas where clothes reside. The baffle creates divisions to ensure air fully surrounds each layer instead of bypassing some areas. Its raised ridges also help tumbling action by preventing clumps of clothes.

Symptoms of a bad baffle include:

• Slow, uneven drying requiring extra cycles  
• Certain areas of clothes remain damp while others over-dry
• Reduced airflow output from the vent due to blockage

Replacing it with the genuine GE baffle plate restores optimized air distribution within the drum. The part is also compatible with some Kenmore dryers that use GE elements.

This retaining clamp secures wiring, hoses, or small assemblies to keep them routed and stable, helping prevent rubbing and vibration that can lead to wear or intermittent issues. Use it to replace a broken or missing clamp. What it does:

• Holds wires, hoses, or tubing in place to prevent contact with moving parts
• Reduces vibration and rattling by keeping components secure
• Prevents chafing that can cause insulation wear or exposed wiring
• Restores proper routing after repairs or part replacement

• Disconnect power (and water if applicable) before accessing internal components
• Use appropriate hand tools; avoid over-tightening which can damage the clamp or secured part
• Inspect surrounding wiring/hoses for damage and replace if needed

This motor and pulley assembly drives the dryer drum so clothes tumble and dry evenly. Replacing a worn or damaged unit restores normal drum rotation and reduces noise for reliable drying performance. What it does:

• Spins the dryer drum by transferring motor power through the pulley and belt
• Stops drum rotation when the motor or pulley fails
• Helps prevent loud squealing or grinding caused by worn pulley bearings
• Can resolve symptoms like no tumbling, intermittent rotation, or abnormal noise during operation

• Disconnect power (unplug or shut off breaker) before servicing
• Basic hand tools required; follow the dryer model's service manual for disassembly
• Handle wiring connectors and mounting hardware carefully; verify secure connections
• Test run after installation to confirm proper drum rotation and quiet operation