Gud27essmww Parts

This motor pulley and nut kit replaces a worn or damaged drive pulley on a washing machine's motor, restoring proper belt engagement. A true, undamaged pulley helps ensure reliable agitation and spin without slippage or squeal.

• Mounts on the motor shaft to drive the belt for wash and spin cycles
• Worn grooves or wobble can cause belt slippage, squealing, or a burning rubber smell
• Failure may present as slow/no spin or weak/intermittent agitation
• Restoring the pulley helps maintain correct belt tracking and reduces premature belt wear

• Unplug the appliance and disconnect water; wear gloves and ensure stable access to the motor
• Remove the belt, hold the motor shaft, then remove the old nut and pulley
• Clean the motor shaft; seat the new pulley fully and install the new nut, tightening securely
• Reinstall and align the belt; rotate by hand to verify tracking before reassembly and testing

Dryer not drying properly or overheating? A clogged lint trap duct assembly restricts airflow. This replacement restores ventilation in 30-45 minutes.

Hardware kit for laundry centers includes mounting screws, brackets, and retainers to secure internal panels and components. Replace if missing or stripped.

This replacement drum assembly is the rotating cylinder that tumbles laundry in your dryer. Replacing a damaged or out-of-round drum restores smooth, quiet tumbling and helps protect fabrics from snags, scraping, and uneven drying.

• Forms the rotating chamber that holds clothes; driven by the belt and motor to tumble items for drying
• Works with drum seals and lifters/baffles to maintain airflow and separate fabrics for even drying
• Replacing a dented, cracked, or out-of-round drum can resolve thumping, scraping, or rumbling noises
• Addresses sharp seams, loose spots, or rust that can snag/tear clothing or leave marks

• Disconnect power; shut off gas supply for gas models before service
• Remove top/front panels and release belt tension to lift out the old drum; note belt routing
• Compare parts and move over any reusable, model-specific components if required
• Inspect belt, idler pulley, bearings, and felt seals while open; replace if worn

Seals dryer exhaust duct connection to contain airflow and prevent lint entering cabinet. Replace if cracked or loose to restore efficiency. Verify fit.

Replaces a cracked, broken, or missing top cover on your laundry center. Protects internal components and secures wiring. Restores cabinet appearance.

The Baffle is an OEM part for GE electric dryers. Located inside the dryer drum, it helps separate clothes and improves air circulation during tumbling cycles. 

To achieve consistent drying times, a dryer relies on balanced airflow penetrating all areas where clothes reside. The baffle creates divisions to ensure air fully surrounds each layer instead of bypassing some areas. Its raised ridges also help tumbling action by preventing clumps of clothes.

Symptoms of a bad baffle include:

• Slow, uneven drying requiring extra cycles  
• Certain areas of clothes remain damp while others over-dry
• Reduced airflow output from the vent due to blockage

Replacing it with the genuine GE baffle plate restores optimized air distribution within the drum. The part is also compatible with some Kenmore dryers that use GE elements.

Fix poor airflow or a fan that won't spin in your laundry center. This fan magnet assembly restores proper motor operation for consistent cooling performance.

Secures wiring and hoses in your laundry center to prevent rubbing and wear. Replace when broken or missing to maintain proper routing. Verify fit.

Replaces damaged or worn control panel face on laundry centers. Restores front appearance and provides secure mounting for controls. Needed when cracked or broken.

This lid bumper cushions the lid of your top-load washer as it closes, absorbing impact to reduce slamming noise and protect the top panel's finish. Replace a worn or missing bumper to restore smooth, quiet lid operation. What it does

• Absorbs impact between the lid and cabinet to reduce slamming and vibration noise
• Helps protect the top panel finish from chips and scratches near the lid area
• Restores proper cushioning when the original bumper is missing, cracked, or flattened
• Common symptoms: lid slams or clunks when closing, increased noise, visible missing bumper

• 1 lid bumper

• Disconnect power before servicing
• Open the lid and pull the old bumper straight out of its mounting hole; needle-nose pliers can help if it's stuck
• Clean the hole and surrounding surface for a secure fit
• Press the new bumper fully into the hole until seated flush; for even cushioning, consider replacing both if your model uses two

Hub nut secures the washer drum hub assembly in your laundry center. Replace if the nut is stripped, loose, or missing to properly mount the drum hub.

Secures front panel on laundry centers. Replace if broken or panel becomes loose. Verify fit with your model number before ordering this clip.

This seat for a ball joint provides the mating surface that holds a refrigerator/ice system ball joint in place, helping maintain a watertight seal and proper pivot action for dispensing or valve movement. What it does

• Replaces a worn or cracked ball-joint seat that can cause leaks at dispenser or valve connections
• Restores the proper seating surface so the ball joint can pivot and seal correctly
• Helps stop intermittent water drips or pooling near the valve/dispense area
• Useful when the ball shows wear, the seal is compromised, or the joint no longer holds pressure

• One seat (ball joint) as shown

• Turn off water supply and unplug appliance before beginning work
• Access may require removing trim or components; follow OEM instructions for your model
• Inspect mating ball and nearby seals; replace any damaged parts for reliable operation
• Use basic hand tools

Secures hoses in your laundry center. Replace if leaking, loose connections, or visible corrosion occur. Verify fit with your model number before ordering.

Left-side hinge cover for laundry center washer lids. Restores appearance and protects hinge assembly. Replace if cracked, broken, or missing.