Gud27gssmww Parts

Washer won't start or spin? This lid lock magnet triggers the safety sensor to confirm the lid is closed. Simple DIY fix restores normal operation.

Fix a washer that won't spin or stops after a few seconds. This speed sensor regulates wash basket rotation for proper cleaning. Moderate difficulty repair.

Fix a washer that won't spin with this clutch assembly. Restores proper spin speeds and reduces excessive noise during the spin cycle. DIY repair.

This lid actuator engages the washer's lid switch or lock when the lid closes, signaling the control that it's safe to run. Replacing a worn or broken actuator restores reliable lid detection for wash and spin cycles.

• Engages the lid switch/lock when the lid is closed
• Signals the control to allow the washer to start and spin
• A damaged or missing actuator can lead to "lid open" errors
• Common symptoms include won't start, won't spin, or lid lock light flashing

• Disconnect power before servicing
• Access the lid switch/lock area; remove the failed actuator
• Install the new actuator, aligning it to the original mounting points; reuse existing hardware
• Close up and test lid detection before running a full cycle

Fix loud clunking or grinding noises during spin cycle with this transmission platform assembly kit. Connects transmission to tub for proper operation.

Fix washer cycles not registering or settings not responding. This 3-switch selector assembly restores control panel input. Moderate difficulty repair.

Drain hose assembly routes wastewater from the washer pump to your standpipe or laundry tub. Replace if cracked, kinked, leaking, or causing floor puddles.

The Control Panel is an OEM part for GE laundry centers. It is designed to provide convenient and easy control over selecting different wash and dry cycles, adjusting temperature settings, and setting the timer for your laundry. 

A bad Laundry Center Control Panel can occur due to electrical malfunctions, physical damage, or wear and tear over time. If the control panel becomes unresponsive or fails to operate the laundry center properly, it may be time to replace the Control Panel.

Symptoms of a bad Control Panel include:

• Unresponsive buttons or knobs.
• Inability to select or change wash and dry cycles.
• Cracks or damage to the panel. 

If you're experiencing any of these issues, it's time to replace the Control Panel with this genuine GE part to regain full control over your laundry. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Dryer not heating or shutting off mid-cycle? A faulty safety thermostat can cut heat when temperatures climb too high. Direct heater duct mount part.

The UPPER BALL JOINT is an OEM component specifically designed for GE washers. It is found on the center post of the tub and allows the outer tub to pivot front to back during agitation cycles. This precise movement helps optimize cleaning performance by maximizing water and pressure distribution.

Causes of a bad upper ball joint can include wear and tear over time, damage due to impact or misalignment, or unbalanced loads that put added stress on the joint. 

Symptoms of a bad upper ball joint include:

• Excessive noise or squeaking coming from the center post area
• Hampered or sluggish movement of the outer tub during washing  
• Leaks developing around the center post 

Replace yours today with this genuine OEM GE part for reliable front-to-back agitation and smooth cycle operation. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Transmission Pulley Kit is an OEM part for GE washers. It includes nuts, washers, and other key components for connecting the transmission to the drive motor. This kit plays an essential role in transmitting power from the motor to spin the basket and turn the agitator during wash cycles.

Symptoms of a bad transmission pulley kit include:  

• The washer not spinning or agitating during cycles
• Grinding or clicking noises coming from the transmission area
• Leaks around the transmission seal or pulley area

Causes can be cracked or worn pulley components, stripped threads, or loosened nuts that no longer secure connections properly. Over time and through repeated use, normal wear and tear affect these transmission parts. 

Replacing with a genuine GE kit restores like-new operation, transferring optimized power for various cycles. This OEM GE replacement is also compatible with Hotpoint, RCA, and some Kenmore models.

Dryer barely blowing air or taking forever to dry? A worn blower wheel fails to pull air through the drum. This wheel restores airflow for efficient drying.

The Harness Lid Lock is an OEM replacement part for GE washing machines. It is responsible for securely locking the washer lid during operation, preventing the lid from opening while the machine is in use. 

Symptoms of a faulty harness lid lock include:

• Lid not locking or unlocking
• Error codes related to the lid lock system
• Inability to start the washing cycle

A bad harness lid lock can be caused by wear and tear over time, electrical issues, or accidental damage. If you experience problems such as the lid not locking or unlocking properly, or error codes indicating a lid lock failure, it may be necessary to replace the old or damaged harness lid lock with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Fix a washer that hums but won't spin with this motor and pulley assembly. Restores proper spinning and water removal during the spin cycle.

Fix a broken, stripped, or wobbly control knob that slips or falls off. This assembly restores accurate cycle and setting selection on your console.

Secures dryer panels, brackets, and internal assemblies. Replace missing, stripped, or damaged screws to restore proper alignment and prevent vibration.