We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Control Panel is an OEM part for GE laundry centers. It is designed to provide convenient and easy control over selecting different wash and dry cycles, adjusting temperature settings, and setting the timer for your laundry.
A bad Laundry Center Control Panel can occur due to electrical malfunctions, physical damage, or wear and tear over time. If the control panel becomes unresponsive or fails to operate the laundry center properly, it may be time to replace the Control Panel.
Symptoms of a bad Control Panel include:
If you're experiencing any of these issues, it's time to replace the Control Panel with this genuine GE part to regain full control over your laundry. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Most orders arrive by Wednesday, November 25
Drain hose assembly routes wastewater from the washer pump to your standpipe or laundry tub. Replace if cracked, kinked, leaking, or causing floor puddles.
First of you need to remove front panel of the washer, using a putty knife push the tabs between the top of the machine and the front panel. Once front panel is exposed drain hose is connected to pump which is in the front of the machine,very easy to access with the front off. Remove old hose with pliers and discard ,run new hose thru outlet on the back of the machine and secure new hose to drain and secure hose to the machine, reinstall front panel of washer and that's it Read more
The Harness Lid Lock is an OEM replacement part for GE washing machines. It is responsible for securely locking the washer lid during operation, preventing the lid from opening while the machine is in use.
Symptoms of a faulty harness lid lock include:
A bad harness lid lock can be caused by wear and tear over time, electrical issues, or accidental damage. If you experience problems such as the lid not locking or unlocking properly, or error codes indicating a lid lock failure, it may be necessary to replace the old or damaged harness lid lock with this genuine OEM part.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I replaced the Lid Lock Harness and all is good! Fast shipping. Read more
The UPPER BALL JOINT is an OEM component specifically designed for GE washers. It is found on the center post of the tub and allows the outer tub to pivot front to back during agitation cycles. This precise movement helps optimize cleaning performance by maximizing water and pressure distribution.
Causes of a bad upper ball joint can include wear and tear over time, damage due to impact or misalignment, or unbalanced loads that put added stress on the joint.
Symptoms of a bad upper ball joint include:
Replace yours today with this genuine OEM GE part for reliable front-to-back agitation and smooth cycle operation. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Dryer not heating or shutting off mid-cycle? A faulty safety thermostat can cut heat when temperatures climb too high. Direct heater duct mount part.
Dryer barely blowing air or taking forever to dry? A worn blower wheel fails to pull air through the drum. This wheel restores airflow for efficient drying.
Replaced the top bearing assembly, drive belt, and blower wheel. The most time consuming and difficult part was putting the new drive belt back on the pulley and tensioner. Be sure to know how it is routed through them. It is a very tight fit getting your arm in there and connecting it blindly. Read more
Seals joints between washer components to prevent leaks. Replace if flattened, cracked, or causing drips from the tub bottom. Confirm fit with your model.
To access the tub seal, complete disassembly of the washer unit was involved, including removal of the dryer unit on top in order to pull out both tubs. The motor and bearings must also be removed as well from the underside of the outer tub. Read more
Fix a washer that hums but won't spin with this motor and pulley assembly. Restores proper spinning and water removal during the spin cycle.
Replaced motor. Read more
Fix a broken, stripped, or wobbly control knob that slips or falls off. This assembly restores accurate cycle and setting selection on your console.
Mounts in the washer's drive mechanism to support the shift fork. Replace if the assembly is cracked, broken, or worn to restore proper gear shifting.
Secures dryer panels, brackets, and internal assemblies. Replace missing, stripped, or damaged screws to restore proper alignment and prevent vibration.
It was easy, I got the model number of my dryer, then I went on google and found your website. You got a perfect diagram of the door of my dryer. After I saw the video relate it to my problem, I purchased the parts that I need it to fix it, I didn’t need my husband to do it for me. I gave him a surprise after he got home for work. It was all done. Thanks Read more
Shifter hub connects the drive system to the agitator and spin mechanism in washers. Replace if cracked, worn, or broken to restore proper shifting.
This gas conversion kit adapts select 27-inch GE gas dryers to the correct fuel type, helping ensure safe, efficient burner performance when switching between natural gas and LP (propane) after a move or service change.
Ordered the kit from you. Thank you for shipping so fast. We had the product in 24 hours. Read more
Fix excessive vibration and drum noise in your washer dryer combo. This shock dampening strap stabilizes the drum and reduces wear on components.
Mounts on the transmission shaft to transfer motor power for agitation and spin. Replace if worn, cracked, or causing belt tracking issues.
By replacing it. Read more
The CAPACITOR is an OEM part for GE washers. It works along with the motor to efficiently power the agitation and spinning functions. The capacitor stores and releases electrical current as needed to ensure a smooth wash action.
Symptoms of a bad capacitor include:
Causes of failure can include drying out of internal components over many years, defects in capacitor plates or wiring, or electrical surges damaging sensitive components.
Replace yours today with this genuine OEM GE part for reliable storage and delivery of current. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.