Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replaces a worn, cracked, or missing control knob on your range or cooktop. Attaches to the control shaft to restore burner and function selection.
I popped them right on, they work perfectly. Read more
This surface burner valve regulates gas flow to the 16K burner on your gas range or cooktop, providing smooth flame control from low to high. Replacing a worn valve helps restore proper ignition and precise heat at that high-output position.
The burner valve was stuck and would not turn. I removed the Knobs and the four screws under the knobs two side screws & the four screws under the keypad panel. I removed the ground wire so the panel rolled out of the way I used duck tape to hold the panel and secured it to the grates my valve was the right side inside. I just bought a Dewalt Right Angle Drill Adaptor Model DWARA 50 for another project and it fit right into the bolts securing the valve to the manifold . I turned the shaft with... Read more
If your gas burner won't ignite or only one igniter sparks, this spark module generates the high-voltage pulses needed to light surface burners reliably.
Metal leveling leg screw threads into your range base to adjust height and stabilize the unit. Replace missing, bent, or stripped screws for level footing.
I price shopped for the missing adjuster feet for our big box discounted slide in range. Most local appliance parts suppliers want $12 - $15 per foot... I needed 3, applianceparts.com had them for 4.50 plus shipping. I saved enough to go out to eat and avoid using the new range for another day. Read more
Oven light won't turn on or off? Replace the light switch assembly to restore reliable control. Moderate DIY repair taking 15-30 minutes with basic tools.
Could not find info anywhere to fix it Pulled out the stove seen a side panel of sorts undid the trim remove side panel switch was right there 15 min tops and everything was working again. The rapid preheat door lock everything. I have a duel fuel so no way do you remove the control panel as some were saying Nope look on the side Really easy fix Philips screw driver and 1/4 nut socket and that's it! Read more
This is a genuine lock nut replacement. This is a general piece of hardware that is often used on several types of lawn and garden equipment, including in engines, housing, and other areas. The exact application of this part will vary based on the unit. The lock nut is used to create a more secure seal than a standard nut. When properly secured, the lock nut tightens to a bolt and uses an extra locking washer with teeth to ensure a snug fit.If lock washers do get damaged or lost, they need to be replaced immediately with a genuine OEM replacement. This model is compatible with all types of machines and units since it is a generic part. The washer is sold as an individual part and manufactured by Whirlpool. Lock nuts will need to be installed using a socket wrench or adjustable wrench. Pliers, a screwdriver, or another socket wrench will be needed to hold the bolt while the lock nut is being secured in place. Be sure to thread the lock nut carefully to ensure a strong seal and avoid stripping the bolt or the nut.
Ordered the roller and nut, reattached the nylon wheel that I found in the floor under the oven.This was the only website where I could find all of the parts detailed and so I knew exactly what to buy. Even the manufacturer's website didn't have this info. Read more
A shoulder screw that secures appliance components and provides a precise pivot or spacer point. Replaces a missing or worn screw to restore alignment, reduce rattling, and keep panels and assemblies securely in place. What it does:
I had to remove the oven door, which I learned is made to come off without tools. Then took out the bottom by removing two screws and lifting. Removed the screws attaching the igniter, pulled wires thru back until I could get the connector and disconnect. When the new igniter arrived, I had to change the connector. I cut the one off the old one, and spliced to the new one using solder and shrink tubing. Just reverse the procedure to install. I replaced the screws with new ones. Read more
Color: White. For black order WP98008545. For biscuit order 98008169.
Weak or uneven flames? This gas pressure regulator controls gas flow to your range burners for stable, consistent heating and proper ignition.
Fix weak or uneven flames on your gas range burner. This orifice holder secures the gas orifice for proper flow and consistent flame performance.
I am a plumber by trade so I was guessing my way through this. It took me a while to figure out that I had to drill out the screws that held the burners in place. The screws were so rusted that I couldn't tell that they were philips. Then I found that I needed to pull the stove out about 5" and put 2x4s under the feet so I could get the screws that hold the top down. I ruined the orfice holders trying to drill out the old screws. I think my entire problem was caused by rust on the pan that the... Read more
Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.
I purchased a can of black appliance spray paint, removed the panels on the dishwasher, sprayed them, and a few hours later put them back. They're beautiful and it looks like I have a brand new dishwasher! It now matches everything and looks great with the new granite counter tops I just installed. THANK YOU FOR THE GREAT IDEA!!! I'm a 76 year old female and my friends think I'm a genius! Read more
White porcelain touch-up paint for repairing chipped, scratched, or worn surfaces on ranges, ovens, and refrigerators. Restores appearance on exterior panels and trim. 2 oz. can.
Simply painted over worked great Read more
Sheet metal pan head screw secures panels, brackets, and components to appliance cabinets. Replace missing, stripped, or corroded screws to restore fit.
Replaced burners and cleaned Read more
Replace a missing or damaged burner cap to restore proper flame shape and even cooking heat. Covers the sealed gas burner head for reliable ignition.
I purchased all four burner caps. They fixed it and look great. Read more
White touch-up paint for covering minor scratches, chips, and blemishes on oven liners. Restores appearance of damaged oven interior surfaces.
Metal support trim that secures and cushions the glass panel along the bottom of your oven door. Replace if rusted, cracked, or missing to stabilize glass.
Took the oven doors off the hinges and then removed the old rusted trim, cleaned up the doors and put new trim in. Completed in 20 minutes Read more