We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix an oven that won't reach set temperature or shows inaccurate readings. This temperature sensor monitors heat levels for proper cooking performance.
Guessed it must be either a heat sensor or a lower element. Bosch wall oven with no easy access to the back of the stove. Had to remove the door (very Heavy) to more easily access the temperature sensor. I thought from a video that the sensor could be easily replaced without having to access the red of the stove - not true! The sensor wire was secured to other wires and a clip screwed into the sheet metal. I was able to remove all screws with a Torx head driver. Since I had to pull the unit out... Read more
Most orders arrive by Wednesday, November 25
The Bulb is an OEM part for Bosch ovens. This component provides illumination inside the oven, allowing you to easily monitor the cooking process without opening the door and losing heat.
Causes of a bad bulb can include filament burnout due to extended use, electrical issues that cause power surges, or physical damage from accidental impacts.
Symptoms of a bad bulb include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Changed light bulbs Read more
Replace your worn oven door gasket to restore a tight seal, prevent heat loss, and maintain consistent baking temperatures. Confirm fit with your model number.
After watching your great video showing how to install, we ordered the product from you. Great service and an easy install!!! Thanks so much!! Read more
Fix a burned out or non-working heating element in your wall oven. This replacement element restores proper temperatures. DIY-friendly, takes about 20 minutes.
It was an awkward position replacement job, but with a little help it is working well Read more
Fix an oven that won't reach temperature or gradually loses heat. This bake element generates heat for cooking. Moderate DIY install with clips.
Seals the oven door to retain heat and improve efficiency. Replace if you notice heat escaping or uneven cooking. Verify fit with your model number.
This meat probe sensor is a temperature-sensing device that inserts into food while it cooks in the oven, allowing the oven to monitor the internal temperature and automatically stop cooking when the target temperature is reached. It connects to a jack inside the oven cavity via a heat-resistant cable. Replace this probe if your oven no longer reads the food temperature accurately, displays a probe error code, or if the cable or tip is visibly damaged.
Replaced Read more
This is a cooling fan assembly used in wall ovens and ranges to circulate air and prevent overheating of internal components and surrounding cabinetry. It helps dissipate heat from the oven cavity and electronics during and after cooking cycles. Replace this fan if you notice excessive heat on the outer surfaces of the oven, the fan runs noisily or intermittently, or the oven displays overheating error codes.
The biggest issue was getting the double oven out where it could be worked on. Since I had installed it 3 years ago I knew how to do it. Remove doors and shelves to make it manageable then slide it out onto milk crates. Remove the top cover and power up the fan with a line cord plugged into 120 VAC. The fan doesn't run on low speed so I knew it was lame. It did run on high so probably just a couple of short turns in the motor. Called up APP and ordered the fan/sensor assembly and two days... Read more
Uneven baking or slow heating in convection mode? A failed convection fan motor stops hot air circulation. Moderate DIY repair restores even cooking.
Replace your wall oven's display module to restore clear indicator lights and responsive touch controls. Fixes erratic displays and unresponsive keypads. Verify fit with your model number.
Ordered new module; installed in about 15 minutes. Works great. Read more
This Terminal Box is an OEM part for Bosch Built-In Ovens. Integral to the oven's electrical system, this component serves as a secure connection point for various electrical wires within the appliance.
A common issue with a malfunctioning Terminal Box is loose connections or damage to the terminal block due to heat exposure or aging.
Symptoms of a defective Terminal Box may include:
Removed and replace Read more
This is a telescopic oven rack that slides out smoothly on ball-bearing glides, making it easier to access heavy dishes without reaching deep into a hot oven. It fits standard 30-inch wall ovens and replaces a fixed rack with a pull-out design. Replace this rack if the sliding mechanism is bent, the glides no longer roll smoothly, or the rack is warped from heat damage.
Replaced the oven bake element and the sensor. I don’t think that the sensor was faulty, but replaced anyway. The replacement was fairly easy, but there are 2 clips that hold the element and the element’s front crossbar will snag on the clip that holds the rear cross member. To solve this and prevent the rear clip grabbing the front cross member, used a saw as a guide to cover the rear clip and act as a ramp for the element. Once the front cross member has passed the rear clip, the saw can... Read more
Replacement glass panel for wall oven doors. Restores appearance when original glass is cracked, chipped, scratched, or broken. Direct fit part.
AppliancePartsPros.com was the only place that had the glass available. I have been waiting since the end of January for glass from the factory and they still don't have it available. AppliancePartsPros.com had to me in 2 days! I wish I had known about them sooner!! Read more
Factory fixing kit with mounting hardware to secure panels, brackets, or trim on your wall oven. Replaces worn, missing, or damaged fasteners for alignment.
Replace your wall oven door latch if the door won't stay closed, the oven won't start, or cycles are interrupted. Restores proper door closure and locking.
This electronic control module is the appliance's main control board. It manages cycle timing and routes power to key components, helping restore normal operation when the original board becomes unresponsive or behaves erratically. What it does:
I replaced the Control Module. Read more