George K Saint Johns , FL September 30, 2014 Broken probe Replaced Read More... 7 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes
Robert O San Diego , CA December 14, 2019 Oven on bake would reach temperature but then would gradually loose temperature almost 100 degrees Replaced the oven bake element and the sensor. I don’t think that the sensor was faulty, but replaced anyway. The replacement was fairly easy, but there are 2 clips that hold the element and the element’s front crossbar will snag on the clip that holds the rear cross member. To solve this and prevent the rear clip grabbing the front cross member, used a saw as a guide to cover the rear clip and act as a ramp for the element. Once the front cross member has passed the rear clip, the saw can be pulled out. A long ruler could be used instead. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers
Kristin S Manteca , CA December 05, 2021 Temperature probe failed This probe labeled for BOSCH ovens works in my Thermador Oven/microwave/warming drawer combination. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes
Edward H Townsend , MA February 24, 2019 Appliance: Bosch Electric Range HEI7152U/01 Bosch electric oven not coming up to temp. The broiling element (Upper) does not come on if the door is not closed - I realized this when I tried to test the element using Broil - it kept saying 'Close Door', and would not heat. Therefore by replacing the door switch it fixed the problem with coming up to temperature on Bake - I guess the upper Broiling element is used in addition to the baking element to get up to temp. Changing switch is trivial - just pull/pry it out and pull off connectors and push it back it in. Oven has worked perfect last 4 months now - all because of this switch we had been dealing with this for over a year! Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Kathie H Danville , CA October 18, 2016 Probe setting on oven wouldn't work New probe Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes