Hbl870 Parts

This replacement screw secures appliance panels, brackets, or internal components. Swap out missing, stripped, or corroded hardware to restore a tight, rattle-free fit and keep assemblies properly aligned for reliable everyday use.

• Fastens panels, brackets, or subassemblies to the appliance frame
• Helps maintain alignment and reduce vibration and rattling
• Direct replacement for a worn, corroded, or missing screw
• Typical symptoms: loose panels/handles, gaps or misalignment, rattling noises, visibly missing fastener

• Disconnect power; also shut off water or gas before servicing
• Match head/driver type and length to the original; start threads by hand to avoid cross-threading
• Reuse any original washers or spacers if present
• Tighten snugly—do not overtighten to prevent stripping threads or damaging plastic mounts

This is a push-button control switch used to complete electrical circuits for appliance functions, restoring responsive button/control operation. It replaces a worn or failed switch to help return normal control-panel behavior. What it does

• Acts as the user-input electrical contact for a specific control or function.
• Completes or breaks the circuit when pressed so the appliance will respond to commands.
• Common symptom: control or button is unresponsive or intermittent.
• Common symptom: the appliance will not start or a function will not engage when the button is pressed.

• One switch.

• Disconnect power before accessing the control panel or wiring to avoid shock.
• Handle the switch and wiring gently to avoid damaging connectors or the control board.

This is a replacement mounting washer that helps secure fasteners and distributes load to protect appliance parts from wear and loosening. It's a small but essential hardware piece for stable, reliable assembly. What it does:

• Provides a stable bearing surface between a fastener and the appliance part to reduce wear
• Helps distribute clamp force to prevent pull-through or damage to softer materials
• Reduces loosening from vibration and movement that can cause noise or misalignment
• Restores correct spacing where a worn or missing washer causes loose fittings or rattling

• One mounting washer

• Turn off power and disconnect the appliance before accessing internal components
• Match orientation and location to the original washer; replace like-for-like using the same mounting hardware
• Use correct size fastener and torque to avoid over-compression or stripping
• If other hardware shows wear or damage, replace fasteners and adjacent parts at the same time

This genuine screw secures panels, brackets, and other components in your appliance. Replacing a missing, rusted, or stripped fastener restores a snug fit, reduces vibration, and helps keep assemblies properly aligned during daily use.

• Fastens panels, brackets, or covers to the appliance chassis
• Helps maintain alignment to reduce looseness and vibration
• Replaces missing, corroded, or stripped hardware

• Disconnect power and shut off water/gas before servicing
• Support the panel or component while removing the damaged screw
• Start the new screw by hand to avoid cross-threading, then tighten until snug—do not overtighten
• If the receiving clip or hole is stripped, repair or replace that hardware before reinstalling

This cable harness routes power and signals between the appliance control and components to restore electrical connectivity. Replaces a damaged or broken harness to help appliances power up and communicate correctly. What it does:

• Transfers power and control signals between modules, switches, and sensors
• Restores interrupted circuits caused by frayed wires or broken connectors
• Helps stop intermittent operation, loss of functions, or failure to power on when wiring is at fault
• Provides pre-terminated connector ends for plug-and-play replacement

• Disconnect power to the appliance before servicing to avoid shock or damage
• Compare connectors and wire routing to the old harness before installing
• Route harness along original clips and channels; secure to prevent chafing

This spacer sets the correct gap between mating components so the assembly aligns and operates smoothly. Replacing a worn or missing spacer restores proper fit, helps prevent rubbing, and supports consistent performance. What it does:

• Maintains specified clearance and alignment within the assembly
• Helps prevent metal-to-metal contact that can cause noise or wear
• Supports smooth movement or secure mounting where designed
• Symptoms of a failed spacer can include looseness, misalignment, scraping noises, or uneven movement

• 1 spacer

• Disconnect power (and shut off gas/water if applicable) before servicing
• Access the relevant assembly and note the spacer's orientation/position
• Replace one-for-one; seat fully and avoid overtightening fasteners
• Reassemble and test for proper alignment and smooth operation

This door latch secures the appliance door during operation so cycles can start and run safely. It replaces a worn or broken latch to restore proper door closure and reliable operation. What it does:

• Holds the door closed so the appliance can begin and complete cycles
• Prevents the door from opening mid-cycle, reducing spills and interruptions
• Replaces a cracked, loose, or non-engaging latch that won't catch
• Helps address symptoms like a door that won't stay closed or causes the unit to not start

• Disconnect power (and water for water-connected appliances) before starting work
• Handle door components carefully to avoid damaging trim or glass
• After installing, test door operation and run a short cycle to confirm proper latch engagement

This bottom heater is the oven/dryer heating element that generates heat for normal operation, restoring proper heating when the original element fails. It installs in the appliance's lower heater area to warm air or baking surfaces as designed. What it does:

• Produces heat for the appliance's lower heating chamber to enable normal drying or baking cycles
• Restores proper heating when the original element is burned out or broken
• Resolves symptoms like no heat, weak heat output, or uneven heating in the lower cavity
• Works as the core heating component; failure can cause longer cycles or incomplete drying/cooking

• One bottom heater

• Disconnect power (and gas supply, if applicable) before servicing to avoid shock or injury
• Access typically requires removing the lower access panel or back panel; follow your model's service manual
• Handle the element carefully to avoid damage; ensure all electrical connections are secure and correctly routed

This is a small OEM retainer clip designed to secure wiring, hoses or small components inside the appliance to prevent rubbing, chafing and noise. It helps keep internal parts in their intended position for reliable operation. What it does:

• Holds wiring harnesses or small hoses in place to prevent contact with moving or hot parts
• Reduces rattling and vibration-related noise by keeping components secured
• Prevents wear and potential damage caused by loose or rubbing wires and hoses
• Helps maintain proper routing so related components continue to function as intended

• Disconnect power and water before accessing internal components
• Inspect surrounding area and replace any damaged or worn clips with the same style
• Press clip into the designated mounting slot or panel until it seats securely; ensure harness/hose is routed correctly
• Use caution around sharp sheet metal; wear gloves and follow appliance manufacturer instructions

This insert is a replacement trim panel that restores the appliance's finished appearance and helps protect internal components from debris. It fits into the surrounding assembly to maintain a secure, flush exterior surface. What it does:

• Replaces a cracked, warped, or missing trim panel to improve appearance.
• Helps keep food, dust, and moisture out of internal gaps.
• Reduces rattling or movement when the surrounding panel is loose.
• Restores correct alignment for adjacent trim and controls.

• Disconnect power to the appliance before beginning any repair.
• Remove surrounding panels or door to access the insert; keep fasteners organized.
• Handle edges carefully to avoid cuts or damage to the finish.
• If adhesive, clips, or fasteners are damaged, replace them with exact-match parts for secure fit.

This inner door panel restores the dishwasher's internal door surface and helps protect internal components from water and steam. It keeps the door structure rigid and provides a clean, serviceable interior finish. What it does:

• Forms the inner surface of the dishwasher door, directing water and steam back into the tub
• Protects wiring, insulation, and latch mechanisms housed inside the door
• Helps the door close evenly and engage the latch correctly
• Visible damage, dents, cracks, or corrosion on this panel can cause leaks or alignment issues
• Replacing a damaged inner door panel can stop interior moisture damage and improve door performance

• 1 inner door panel

• Disconnect power to the appliance before servicing to avoid electrical shock
• Expect to remove the outer door panel and any attached trim or hardware to access the inner panel
• Handle edges carefully—sheet metal can be sharp and internal insulation or clips may be present

This glass cover replaces a damaged or missing exterior glass panel to restore the appliance's appearance and protect internal components from dirt and contact. It provides a clean, finished surface that matches the original fit. What it does:

• Replaces cracked, chipped, or broken glass to improve safety and appearance
• Shields internal components from debris and everyday contact
• Restores the appliance's original exterior finish
• Helps ensure proper fit of adjacent trim and controls

• One glass cover

• Handle carefully to avoid breakage and wear protective gloves when installing
• Follow the appliance manufacturer's disassembly and reassembly instructions
• Disconnect power to the appliance before beginning any repair

This support mounting bracket secures internal components to the appliance frame, restoring proper alignment and stable operation. It replaces a worn, broken, or loose support to help reduce rattling and prevent component sag. What it does:

• Provides a secure mounting point for internal parts and assemblies
• Re-establishes correct alignment when a bracket is bent or broken
• Helps reduce vibration and rattling caused by loose or damaged supports
• Commonly replaced when a component shifts, rubs, or no longer sits flush

• Disconnect power and water before starting any repair.
• Basic hand tools are typically required; follow OEM service instructions for disassembly/reassembly.
• Inspect adjacent fasteners and clips; replace any that are damaged to ensure a secure fit.

This trim plate is a decorative panel that restores the finished look of the appliance opening and helps cover gaps around the control or access area. It provides a clean, factory appearance and prevents dirt from collecting in the seam. What it does:

• Covers and finishes the edge of an opening or control area for a seamless appearance
• Helps keep crumbs, dust and spills from entering gaps around the appliance face
• Replaces bent, scratched or discolored trim that affects the appliance look
• Restores proper alignment where a damaged trim creates visible gaps

• One trim plate

• Disconnect power to the appliance before attempting removal or installation
• Handle carefully to avoid scratching the finished surface; use soft gloves if available
• Retain any mounting screws or clips from the original trim and reuse if appropriate