Hps18bthww Parts

This condenser support is the replacement mounting bracket that secures the refrigerator condenser coil and helps keep the unit stable behind the lower access panel. It restores proper condenser positioning for reliable cooling performance. What it does:

• Holds the condenser coil in the correct position to prevent contact with other components
• Reduces vibration and rattling from a loose condenser assembly
• Helps maintain proper airflow behind the cabinet when installed correctly
• Can prevent wear to nearby components caused by a displaced condenser

• Disconnect power before servicing and work with the appliance unplugged to avoid shock
• Access typically requires removing the refrigerator's lower access panel or rear service panel
• Basic hand tools are usually sufficient; keep fasteners for reuse unless damaged
• Handle edges carefully; inspect surrounding parts and wiring before reassembly

This plug button thimble is a small control-panel insert that secures and centers push buttons, helping keep button caps in place and reducing moisture or debris entry. It restores proper button feel and alignment on the control panel. What it does:

• Centers and retains push-button caps so buttons press and release correctly
• Helps prevent dirt and spills from entering the control-panel opening
• Replaces a cracked, worn, or missing thimble that lets buttons wobble or fall inward
• Compatible with the original push-button assembly to restore original fit and function

• Simple, non-electrical replacement—power to the appliance is not required for this exterior part, but unplugging is recommended if removing trim near live components
• Remove the button cap first, press the old thimble out from the front or back as applicable, then press the new thimble into the panel opening until fully seated
• Inspect button cap and surrounding trim for damage; replace any damaged mating parts for best fit
• Use care to avoid scratching the control panel; keep small parts away from children

This gasket supply foam is a replacement foam seal strip used to restore a refrigerator door or cabinet seal cushion for a tighter fit and improved temperature control. It helps reduce drafts and keeps fresh food fresher. What it does:

• Replaces worn or compressed foam that can allow air leaks around the door or compartment
• Restores the gasket's shape and cushioning to improve door sealing performance
• Helps reduce humidity build-up and cycling from frequent compressor starts
• Addresses symptoms such as visible gaps, cold loss, frost buildup, or higher energy use

• Remove old foam and any adhesive residue before installing the new strip
• Use appropriate gasket adhesive and follow manufacturer instructions if required
• Work with the appliance unplugged or power turned off; keep fingers clear of pinch points

This metal compressor mounting clip secures the refrigerator compressor to the base, helping keep the unit stable and reducing vibration transfer. Replaces a worn or broken clip to restore proper compressor alignment and quieter operation. What it does:

• Secures the compressor to the cabinet/base to prevent movement during operation and transport
• Helps reduce vibration and rattling that can indicate a loose or damaged mount
• Keeps the compressor aligned so refrigerant lines and mounting hardware remain correctly positioned
• Useful when the original clip is bent, cracked, or missing

• One compressor mounting clip

• Disconnect power to the appliance before beginning any repair
• Support the compressor before removing or installing the clip to avoid strain on lines or fittings
• Use appropriate hand tools; avoid over-tightening fasteners which can cause damage
• Replace rubber grommets or insulation if present and damaged for best vibration isolation

The Vegetable Pan Cover With Slides is an OEM replacement part for GE bottom-mount refrigerators. Located in the refrigerator door, the vegetable pan and cover provide organized storage for fruits and vegetables keeping produce fresher for longer. The inspection slides allow for views of contents without removing the entire cover. 

Causes of a bad vegetable pan cover can include broken or cracked clips, dents compromising the seal, or scratched/faded surfaces reducing aesthetic appeal.

Symptoms of a bad vegetable pan cover include:

• Gaps allowing airflow and faster spoilage of stored items
• Difficulty opening or removing the cover due to poor-fitting slides  
• An uncleanable interior space due to a compromised seal
• Broken clips unable to securely latch the cover in its track

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore bottom-mount refrigerator models. 

The Fresh Food Door Gasket is an OEM part for GE refrigerators. It creates an airtight seal around the refrigerator's fresh food compartment door, preventing warm air from entering and cool air from escaping.

Causes of a bad fresh food door gasket can include wear and tear from frequent opening and closing of the door, damage due to improper cleaning methods, or warping from exposure to extreme temperatures.

Symptoms of a bad fresh food door gasket include:

• Condensation or frost buildup inside the refrigerator
• The refrigerator running more frequently or constantly
• Warm air entering the refrigerator, causing temperature fluctuations
• Visible cracks, tears, or deformations in the gasket

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Water Valve and Tube Assembly is an OEM replacement part for GE side-by-side refrigerators. It serves as the inlet valve installed inside the fresh food compartment. 

Causes of a faulty assembly can include mineral buildup inhibiting proper valve opening or cracking/splitting of aging plastic tubes. Electrical issues affecting the valve solenoid may also develop over time.

Symptoms of a problematic assembly include:

• Ice maker or water dispenser unable to consistently produce ice/water  
• Leaks present around the rear inlet area
• Valve components failed to activate 

Compatible models also include Profile and Monogram side-by-side refrigerators.

The Icemaker is an OEM part for GE refrigerators. It is designed to produce ice cubes by automatically filling the ice mold with water, freezing it, and then ejecting the ice into the ice bucket. This part ensures a steady supply of ice for your household needs.

Causes of a bad icemaker can include mechanical wear and tear, electrical failures, or issues with the water supply. Over time, the icemaker’s components can degrade, leading to inconsistent ice production or complete failure.

Symptoms of a bad icemaker include:

• No ice production
• Small, misshapen, or hollow ice cubes
• Ice maker not ejecting ice
• Unusual noises from the ice maker

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ice Bucket is an OEM part for GE refrigerators. It is a component that stores ice from the icemaker in the freezer compartment. The ice bucket allows for convenient access to ice on demand, fitting seamlessly within the refrigerator design.

Symptoms of a bad ice bucket include:

• Cracks or damage to the plastic material
• Inability to easily remove or insert the bucket  
• Ice falling out of the bucket improperly
• Missing parts like the handle

Note: This is just the ice bucket. It does not include other ice maker components.

Replace your worn ice bucket before further issues arise like ice spilling in the freezer. This OEM GE part restores your refrigerator’s storage and access to ice. It is also compatible with Hotpoint, RCA, and Kenmore refrigerators.
 

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This genuine fastener secures appliance components such as panels and brackets. Replacing a missing or stripped screw restores proper fit and helps reduce vibration or rattling. Features 12-24 threads and an approximate 0.785-inch length. What it does:

• Fastens panels, brackets, covers, and other hardware points in the appliance
• Helps maintain proper alignment and a tight fit of components
• Replaces damaged, stripped, or missing hardware
• Common symptoms include loose or rattling parts and hardware that won't tighten

• One screw

• Disconnect power before servicing; shut off water supply if working near water components
• Start the screw by hand to avoid cross-threading; replace one-for-one in the original location
• Use the correct driver bit for the head style; tighten snugly without overtightening into plastic or thin metal

This control housing is the outer console frame that holds the oven/range control board and user interface, restoring a clean, secure mounting for switches, buttons and the display. It helps keep controls aligned and protected for reliable operation. What it does:

• Secures the electronic control board and control panel components in the appliance console
• Keeps buttons, knobs and display window properly aligned and protected from debris
• Helps prevent intermittent button or display contact caused by a loose or cracked housing
• Addresses symptoms like loose or rattling controls, misaligned buttons, or visible cracks in the console

• Disconnect power (unplug appliance or shut off breaker) before starting any repair
• Remove screws and any trim pieces to access the control housing; handle plastic parts gently to avoid cracking
• Support the control board and wiring when removing the housing to avoid strain on connectors

This mechanical control harness connects the appliance's mechanical timer/control to switches and motors, restoring reliable signal and power routing for timed cycles. Helps re-establish proper control function when wiring is damaged or worn. What it does

• Routes power and control signals between the mechanical timer and associated switches/components
• Restores electrical continuity when original harness has broken wires or failed connectors
• Can resolve symptoms such as intermittent or no timer advancement, loss of specific functions, or components not receiving power
• Designed to match OEM connector locations and wire lengths for direct replacement

• Disconnect power to the appliance before inspecting or replacing the harness.
• Compare the replacement harness to the original to confirm connector types and routing before installation.
• Handle connector terminals gently; avoid pinching or over-bending wires during routing.