Hrt16abshrww Parts

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Handle Door WW is an OEM part for GE refrigerators. It is the outer door handle component that is grasped to open and close the refrigerator door. 

The proper function of the handle is important to allow convenient access to food storage. Causes of a bad handle can include wear and tear over time, as well as damage from excessive force or impacts. 

Symptoms of a bad refrigerator door handle include:

• Difficulty grasping or turning the handle firmly  
• Looseness, wobbling or falling off from the door surface
• The handle not engaging properly to open the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

This replacement freezer door gasket provides a secure seal to help maintain proper freezer temperature and energy efficiency. Designed to match original fit and restore a tight door seal for reliable cold retention. What it does:

• Creates an airtight seal around the freezer door to help prevent warm air infiltration and frost buildup.
• Helps maintain consistent interior temperature for better food preservation.
• Reduces strain on the compressor by improving cooling efficiency.
• Commonly used when the existing gasket is torn, warped, compressed, or no longer seals.

• Remove power to the appliance before starting work to avoid electrical hazard.
• Clean the door flange and warm the gasket slightly for easier installation and proper seating.
• Inspect mounting channel and clips; replace any damaged hardware before installing gasket.

The Evaporator Fan Motor is an OEM replacement part for GE refrigerators. It is designed to fit in the freezer compartment, to circulate cold air and maintain a consistent temperature throughout the freezer. This fan ensures proper airflow, preventing the formation of frost and ice buildup. The felt helps reduce noise and vibration, providing a quieter and smoother operation.

A bad evaporator fan can occur due to various factors, including normal wear and tear, motor failure, or damage to the fan blades. If you notice symptoms such as unusual noises, reduced cooling performance, or frost accumulation in the freezer, it may indicate a need to replace the evaporator fan.

Symptoms of a bad evaporator fan include:

• Unusual noises coming from the freezer
• Reduced cooling performance
• Frost accumulation in the freezer

Restore your refrigerator's freezer compartment by replacing the faulty freezer fan with felt using this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This fresh food door gasket replaces the worn seal around the refrigerator's fresh-food compartment door to restore an airtight seal, helping keep cold air in and reduce warm-air leaks that can cause frost or spoilage. What it does:

• Replaces torn, cracked, or deformed door gasket to restore proper door sealing.
• Helps prevent warm, moist air from entering the fresh-food compartment, which can lead to frost build-up and uneven cooling.
• Restores consistent compartment temperature for better food preservation and appliance performance.
• Can reduce strain from frequent compressor cycling caused by a failing door seal.

• Disconnect power to the appliance before beginning any service to avoid electrical shock.
• Remove the old gasket and clean the door channel of debris or adhesive before installing the new gasket.
• Start installation at a top corner and press the gasket firmly into the channel; warming the gasket slightly (hot water or low-heat hair dryer) can improve flexibility for easier seating.
• After installing, check the door alignment and seal at multiple points; allow time for the gasket to fully seat before judging fit.

This replacement mounting screw fastens panels and components in compatible Frigidaire appliances to restore secure assembly and reduce rattling or loose parts. Simple fastener sized for the original factory location. What it does:

• Secures panels, brackets, or trim to keep parts aligned and stable
• Prevents vibration and noise caused by loose fittings
• Restores proper attachment after repair or disassembly
• Matches the OEM thread and length for a correct fit when specified

• Use the correct screw hole and do not force; cross-threading can damage components
• Tighten to a snug fit—do not overtighten to avoid stripping threads or cracking plastic
• Power tools can be used with care; slow speed and proper bit help prevent slippage
• Turn off power and disconnect the appliance before accessing internal parts

This center hinge pin secures the refrigerator door hinge assembly and provides a stable pivot for smooth door movement and alignment. Replaces a worn or damaged pin to help restore proper door swing and closing. What it does

• Serves as the pivot point for the center/door hinge, keeping the door aligned on the cabinet.
• Helps eliminate door sag, misalignment, or uneven gaps caused by a worn hinge pin.
• Reduces squeaking or binding at the hinge when the pivot is damaged or corroded.
• Works with the hinge assembly to maintain smooth opening and closing of the door.

• One center hinge pin.

• Unplug the appliance or shut off power to avoid electrical hazards before starting work.
• Support the door while removing the hinge assembly to prevent injury or damage.
• Use appropriate hand tools; avoid forcing parts—inspect hinge and surrounding components for wear.

This trough drain is the molded drain channel that guides defrost and condensation water safely to the refrigerator drain system, helping prevent puddling and water damage under the cabinet. What it does

• Collects and channels meltwater and condensation from the evaporator/defrost area into the drain outlet
• Helps prevent water pooling inside the freezer or under the fridge base
• Reduces risk of ice buildup and recurring water leaks in the cabinet
• Restores proper drainage when a cracked or clogged trough causes overflow

• One trough drain

• Disconnect power to the appliance before starting any repair
• Remove food, shelves, and access panels as needed to reach the drain trough
• Inspect surrounding seals and the drain tube for clogs or damage when replacing the trough
• Follow steps for proper removal and reinstallation; use OEM fasteners and gaskets if required

This is a #8 x 9/16" pan head Phillips screw used to fasten trim, panels, and small components on compatible appliances. It replaces lost or damaged mounting screws to restore secure fittings and proper alignment. What it does:

• Secures plastic trim, panels, and brackets to appliance housings
• Provides a flush, rounded head for a clean finished appearance
• Phillips drive allows easy installation with common screwdrivers
• Resists loosening under normal appliance vibration

• Use the correct-size Phillips driver to avoid stripping the head
• Thread the screw in straight and tighten until snug; avoid over-tightening
• Replace any corroded or damaged screws to maintain secure attachments
• Disconnect power to the appliance before accessing internal components

The Compressor is an OEM component specifically designed for GE top-mounted and bottom-mounted refrigerator freezers. Responsible for circulating refrigerant, its robust motor compressively moves gas to chill interiors reliably. Permanent lubrication withstands constant operation.

Symptoms of a faulty compressor commonly involve cycling off too frequently or inefficient temperature regulation. Loss of pressure from degradation risks expensive repairs necessitating replacement. 

Causes of a bad compressor relate to typical wear reducing circulation. Over-activation exposes motor windings to damage requiring timely change.

Causes of a bad compressor can involve:

• Failure to maintain set temperatures 
• Frost buildup impairing performance
• Vibrations transferring to cabinetry

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire refrigerators. Replace to retain steady refrigeration preserving freshness for dependable operation long-term.
 

This is a replacement mounting screw used to secure the defrost timer assembly to the refrigerator control housing, restoring proper fastening and preventing the timer from shifting or vibrating during operation. What it does:

• Secures the defrost timer to the control housing so the timer stays in position.
• Prevents vibration or movement that can cause intermittent contact or noisy operation.
• Helps maintain reliable defrost cycle timing by keeping the timer properly aligned.
• Addresses symptoms such as a loose or missing fastener, rattling behind the control panel, or a timer that shifts when the door is opened.

• Unplug the appliance before starting work to prevent electrical shock.
• Access the control housing or timer bracket per your model's service instructions.
• Use the correct screwdriver or driver bit; do not overtighten—stop when snug to avoid stripping.
• Retain removed hardware for reference and compare screw length/threads before installing.

A small white plug button that covers and protects exposed screw heads or openings, restoring a clean finished look and helping keep dirt and moisture out of the cavity. What it does

• Covers exposed screws or access holes to improve appearance and prevent debris buildup
• Helps reduce rattling by keeping fasteners and openings sealed
• Keeps moisture and contaminants away from internal components in exposed locations
• Works as a simple replacement for worn, cracked, or missing cosmetic plugs

• Snap-fit design; press firmly into the opening until fully seated
• Use a plastic trim tool or small flat screwdriver to remove the old plug gently; avoid damaging surrounding surfaces
• No wiring or special tools required for installation
• Unplug the appliance or disconnect power first

The Start Device is an OEM part for GE refrigerators. It initiates automated functions by sending a starting signal to various refrigerator components. Proper operation relies on the start device acting as the cue to begin cooling cycles, fan motors, and lighting circuits.

Symptoms of a defective start device may include:

• Refusal to turn on or respond to settings adjustments
• Slow or ineffective cooling inside cabinets    
• Lack of airflow circulation or interior lighting

Causes could be worn-out solenoid coils preventing magnetic attraction over extended use, loose wiring inhibiting communication with control boards, or moisture infiltration shortening the starting mechanism.   

Replacing with this genuine GE start device restores dependable appliance routines. Compatible with Hotpoint, RCA, and select Kenmore side-by-side models, it supports reliable refrigerator functioning for years.

This 18-inch full-width glass shelf replaces a cracked, chipped or missing refrigerator shelf to restore usable storage and a clean interior look. Tempered glass offers a flat, easy-to-clean surface for food and containers. What it does:

• Provides a sturdy, level surface for storing food and containers
• Replaces shelves that are cracked, broken, chipped or missing
• Helps contain spills and makes interior cleaning easier
• Restores correct spacing and support for adjustable shelving layouts

• Handle tempered glass carefully and wear cut-resistant gloves to avoid injury
• Remove food and any movable supports before installing the shelf
• Slide the shelf into existing shelf brackets or support rails until fully seated
• If brackets or rails are damaged, replace them before installing the new glass