Hvm154olm1cs Parts

Made by GE. This microwave stirrer motor comes with a square shaped shaft and is usually located in the upper part of the microwave. For a D shaped shaft turntable motor order WB26X10038.

This glass light cover shields and diffuses the cooktop light, protecting the bulb from heat, grease, and splatter while maintaining clear, even illumination over your cooking surface.

• Covers and protects the cooktop light bulb
• Diffuses light for more even illumination and reduced glare
• Helps keep grease and debris out of the light cavity
• Replace if cracked, missing, discolored, or not staying secured

• Disconnect power to the appliance before servicing and allow the area to cool
• Support the cover while removing any retaining screw(s) or release tabs
• Reuse original hardware/clips as applicable and seat the cover fully
• Restore power and test the light for proper operation

This factory glass panel replaces a cracked, shattered, or missing original, restoring a clean, safe cover/viewing surface on your appliance. It helps protect internal areas from splatter and keeps the assembly looking and fitting the way it should.

• Replaces a damaged glass component within the original assembly on applicable models
• Restores a clear, smooth surface for proper appearance and function
• Helps shield underlying parts from spills, grease, and debris
• Common symptoms: cracked or shattered glass, missing piece, sharp edges, looseness/rattling

• Disconnect power before servicing; allow all surfaces to cool
• Wear cut-resistant gloves and eye protection; handle edges carefully
• Support the panel/door during removal and installation to prevent stress on frames/hinges

This holder nut assembly secures a component to the appliance frame, restoring proper mounting and reducing vibration or movement. Replace a damaged or missing holder nut to keep connected parts stable and functioning. What it does:

• Secures a component or assembly to the appliance frame or mounting bracket
• Prevents looseness, rattling, and misalignment caused by worn or missing mounting hardware
• Restores a safe, stable connection that helps maintain normal operation
• Matches OEM mounting geometry for a direct replacement when the original nut is damaged

• Disconnect power to the appliance before servicing to avoid shock or injury
• Access the mounting area by removing the appropriate panel or cover per your model's service instructions
• Start threads by hand to avoid cross-threading, then tighten with the correct tool; do not overtighten
• If any fasteners or nearby components are damaged, replace them as needed for a secure installation

This microwave thermostat is a temperature-sensitive safety switch that helps protect the unit from overheating. When the preset limit is reached, it interrupts power to the affected circuit to help prevent damage and erratic shutdowns.

• Monitors temperature at its mounting location and opens the circuit if overheating is detected
• Helps protect internal components from excessive heat
• Common symptoms of a failed thermostat include: unit shuts off during cooking, won't start until it cools down, or has no power/no heat due to an open safety
• Replace if the original tests open when it should be closed

• Disconnect power by unplugging the unit or switching off the circuit breaker before servicing
• Microwaves contain a high-voltage capacitor that can retain a dangerous charge; only qualified persons should service and discharge the capacitor
• Note wire locations before removal and transfer connections firmly to the new thermostat
• Mount the thermostat securely and in the same position to ensure proper temperature sensing

This TCO cavity is a thermal cutoff assembly that helps prevent oven overheating by interrupting power if temperatures get too high. It replaces a failed cutoff to restore proper temperature safety control. What it does:

• Acts as a temperature safety device that opens the circuit when excessive heat is detected
• Helps prevent overheating-related damage or fire risk when operating the oven
• Common symptom: oven or burner stops heating or cycles off unexpectedly
• Common symptom: oven will not maintain set temperature or complete heating cycles

• Disconnect power to the appliance before servicing to avoid electrical shock
• Replace with the exact part number; follow OEM wiring and mounting orientation
• Inspect surrounding wiring and insulation for heat damage; replace if frayed

Magnetron assembly that produces the microwave energy used to heat food. Replacing a failed magnetron restores heating performance so the oven can warm and cook food properly. What it does

• Generates the microwave energy that heats food; a failed magnetron typically causes little or no heating.
• Can produce loud humming or buzzing if failing.
• May cause sparking/arcing inside the cavity or a burning/odd smell when faulty.
• A bad magnetron can lead to blown fuses or tripped safety devices.

• High-voltage component — unplug the appliance before service. The high-voltage capacitor can retain dangerous charge; do not touch terminals.
• Recommended for installation by someone experienced with microwave high-voltage systems.
• Ensure all panels and covers are reinstalled before powering on.

This evaporator fan motor assembly circulates cold air through the refrigerator compartment to help maintain even cooling and proper temperature control. Replacing a failed fan restores airflow and helps the appliance cool correctly. What it does:

• Moves air across the evaporator coil so the refrigerator/freezer can cool efficiently
• Commonly replaced when there is little or no airflow from the fresh-food or freezer section
• Can stop excessive frost build-up on the evaporator caused by poor circulation
• May reduce unusual noise if the original motor bearings have failed
• Helps prevent uneven temperatures that can cause food spoilage

• One evaporator fan motor assembly as shown

• Disconnect power to the appliance before starting any repair
• Access may require removing interior panels or the evaporator cover
• Handle the fan blades carefully to avoid bending or cracking; ensure proper blade seating on the motor shaft

This magnetron assembly produces the microwave energy used to heat food and includes a built-in thermal cutoff for overheating protection. Replacing a failed magnetron restores heating performance and safe operation in microwave ovens. What it does:

• Generates high-frequency microwaves that cook and warm food.
• Thermal cutoff helps stop operation if the magnetron overheats.
• Commonly replaced when the oven stops heating, heats intermittently, or has weak heating.
• If the oven produces loud humming, arcing, or unusual burning smells.

• Disconnect power and unplug the appliance before service.
• High-voltage components (magnetron and capacitor) can retain lethal charge — discharge the capacitor and follow safety procedures.
• Handle the magnetron carefully; avoid touching terminals or the ceramic output window.

This Cover-Stirrer protects the microwave's stirrer assembly and helps direct microwave energy for more even cooking. It's a direct-replacement plastic cover that restores proper operation and prevents debris from reaching the stirrer. What it does:

• Shields the stirrer/fan area from food splatter and debris to prevent damage.
• Helps maintain proper microwave energy distribution so food heats more evenly.
• Prevents contact with moving stirrer components for safer operation.
• A cracked or missing cover can lead to uneven heating, noise, or arcing.

• One Cover-Stirrer

• Disconnect power to the appliance before servicing.
• Remove the microwave's inner components or cavity access panels to reach the stirrer area.
• Align and seat the cover securely over the stirrer assembly; do not force or overtighten.
• If the existing cover is damaged, replace it; inspect surrounding components for damage or wear.

This nut assembly secures an appliance component to its mounting point, restoring a solid connection and preventing unwanted movement. Replace a damaged or missing nut to stop rattling and keep parts aligned for reliable operation. What it does:

• Fastens a panel, bracket or component to its mounting stud or bolt to maintain proper alignment.
• Restores a secure connection when the original nut is stripped, corroded or missing.
• Helps stop rattling, looseness or parts that won't stay in place.
• Works as a direct replacement to restore proper fit and function.

• Disconnect power (and water if applicable) before beginning any repair.
• Use the correct-size socket or wrench; avoid cross-threading when installing.
• Tighten snugly but do not overtighten — replace mating hardware if threads are damaged.

This noise filter assembly is a direct-replacement line filter that helps reduce electrical interference and appliance noise for compatible GE appliances. It restores cleaner power to control boards and can help stop buzzing or interference-related behavior. What it does:

• Suppresses incoming electrical noise and RF interference on the power line
• Helps prevent control glitches and erratic behavior caused by voltage transients
• Can reduce humming, buzzing, or audio/EMI interference from the appliance
• Supports stable operation of electronic controls and sensors

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle wiring and connectors carefully; match wires/terminals exactly on reassembly
• Secure the filter in its mounting location and ensure wiring is routed clear of moving parts

Replacement mounting bracket that secures internal panels or components to the appliance frame, restoring alignment and stability. Use this bracket to replace cracked, bent, or missing supports that cause vibration or loose parts. What it does:

• Supports and secures panels, trim, or internal assemblies to keep components properly aligned.
• Reduces rattling, sagging, or movement caused by a broken or missing bracket.
• Restores stable mounting after impact, wear, or stripped mounting points.
• Helps maintain proper fit and operation of adjacent parts by providing a solid attachment point.

• Disconnect power (and water/gas if applicable) before starting any repair.
• Basic hand tools required; remove adjacent panels or trim for access as needed.
• Retain original fasteners when possible; replace damaged clips or screws.