Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures wiring harness to prevent rubbing and loose connections. Replace if worn or broken to restore proper wire routing. Confirm fit with your model.
Pretty easy job! Just had to remove the old parts and new ones fit perfectly. Read more
Replacement screw secures panels, brackets, and trim inside your oven or range. Restores tight fit when original hardware is missing, stripped, or damaged.
Secures the oven door hinge to the range cabinet frame. Replace if cracked, bent, or damaged to restore proper door alignment and closure fit.
The oven door was open and the wife fell onto the door. After that, the door would not close all the way and hung lower than it should. I could not tell if it was the hinge or hinge receiver that was bent so I ordered both. When the parts arrived I removed the door by unlatching the hinge and lifting it off the range. the door has 3 screws on the bottom and two at the top. Once the door was separated each hinge has three screws to remove and replace the hinge. Reassembled the door, reinstalled... Read more
Figured out how to take oven apart then removed all the old insulation. Throughly cleaned every thing and black taped the wire where the mice chewed on it. I ordered this insulation and didn't use the oven until it came in. Once I received it I took the oven back apart and placed the insulation in place. Every thing was precut to size. Super easy to install! Then put everything back together. Oven is good as new. Read more
Replacement mounting screw for securing panels, brackets, and components inside your appliance. Needed when original screws are stripped or missing.
Hex washer head screw for electric ranges. Secures panels, brackets, and internal components. Replace if screw is stripped, missing, or damaged.
Replace your missing, worn, or damaged range washer. This small metal component secures parts and assemblies throughout your oven, ensuring proper fit.
Tested the power to the unit by turning on the cooktop portion and saw that I had power to all of the burners. Turned the selector knob to broil and saw that the top element would heat up. I then turned off the breaker to the unit. I then decided to take out the baking element to do a continuity test. When I touched it, a 1.5 inch section fell out. Since that concluded my continuity test, I assumed I needed a baking element. After receiving the parts the NEXT DAY (amazingly great service... Read more
8-18 AB IHW 5/8 S
Bottom trim channel for range oven doors. Covers gaps and finishes the bottom exterior edge of the door. Replace if rusted, bent, cracked, or missing.
I ordered the part and was impressed to receive it within two day! I didn't need the screws I ordered (which I ordered just in case) but the trim was put on with no problem and my oven looks brand new again! Thank you! Read more
White vent door trim for range. Replaces cracked, discolored, or missing trim pieces. Installs on the front panel around the vent opening for a clean finish.
Replacement maintop hinge for your range. Secures and supports the cooktop maintop panel. Order a new hinge if yours is broken, cracked, or worn.
Replacement vent tube for electric ranges. Routes air from oven cavity to exterior vent. Order if original is cracked, damaged, or missing.
Replaces brittle, burned, or grease-soaked insulation inside your oven door. Restores the thermal barrier to reduce heat loss and exterior heat.
Replaced broken parts, all ok. Read more
Usually ships within 4 - 14 days
Drawer wedge guide aligns and stabilizes your range's lower drawer for smooth operation. Replace if cracked, broken, worn, or missing to eliminate wobble.
This replacement mounting screw is used in cooking appliances to fasten components securely. It restores a tight, rattle-free fit so panels, brackets, or burner-related parts stay properly aligned during everyday use.
I did some research on my own and then spoke with the “Pros” at Appliance Parts Pros. Both confirmed the main board needed to be changed. The other less likely item was the oven sensor. I changed the sensor first as it was inexpensive. The error codes continued. Subsequently, I then changed the main board which was slightly difficult. When changing 2 screws hold the board in place on each front corner only. Also suggest you take a picture of wiring. I replaced wiring in place from old board to... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.