Jbp95s0f1ss Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Genuine Ge part

Cover Control

5.0 (1)

By: Ge

Part Number: WB02T10532

Do-It-Yourself Stories from Customers like You Parts missing from a used range we bought Linda U. • Viroqua , WI • April 03, 2015

Went on line and found appliance parts pros. Ordered what we needed. Put it all back together and it works great. Fast ordering and fast delivery. Thanks guys. We saved at least half on all the parts. Read more

Genuine Ge part

Trim Vent Door (Ge)

By: Ge

Part Number: WB07T10220

Genuine Ge part

Spring Clip

By: Ge

Part Number: WB09T10006

Genuine Ge part

Hinge Receiver

5.0 (3)

By: Ge

Part Number: WB10T10005

Do-It-Yourself Stories from Customers like You Ge electric oven door hinge & door handle broke Robert D. • Oceanside , CA • January 03, 2017

REPLACE door hinges and door handle (about 30 minutes) 1. Open the door to the first catch. 2. Lift the latch keepers (stoppers) on the hinge. 3. Lift / pull the door away from the oven. 4. set on a flat surface with inside of door up. 5. Remove three screws on the bottom of the door. 6. Remove two screws on the inside towards of the top of the door (gold in color). These are long wood type screws. 7. carefully lift the inner door from the outer door. (NOTE: there are two metal pieces that the... Read more

Genuine Ge part

Hinge Assembly

By: Ge

Part Number: WB10T10008

Genuine Ge part

Motorized Latch Assembly

By: Ge

Part Number: WB15T10018

Genuine Ge part

Latch Motorized Asm

By: Ge

Part Number: WB15T10106

Genuine Ge part

Terminal Box

By: Ge

Part Number: WB17T10002

Genuine Ge part

Main Terminal Block

By: Ge

Part Number: WB17T10003

Genuine Ge part

Nut

By: Ge

Part Number: WB1X5968

10 - 32 Nickel plated

Genuine Ge part

Fan Motor

5.0 (3)

By: Ge

Part Number: WB26T10007

Do-It-Yourself Stories from Customers like You Convection fan motor stopped working Bradley L. • Bellevue , WA • October 30, 2015

Pulled oven/range away from wall. Unplugged appliance. Removed oven racks and then the four screws holding fan/heating element cover. Holding fan blade used socket to remove retaining nut and then slid fan blade off of motor shaft. Note: the retaining nut is removed by turning clockwise. Removed screws holding back panel in place exposing fan motor. Removed three screws holding motor in place then disconnected two wires going to terminals on motor. Installed new motor using the same wires and... Read more