Jbs8860bdp Parts

This vent tube directs heated air and moisture from the appliance to its exhaust path, maintaining proper airflow around internal components. Replace a cracked, warped, or missing tube to restore safe ventilation and help prevent heat and condensation buildup. What it does:

• Channels hot air and steam from the cavity to the outlet
• Helps prevent heat accumulation around controls and adjacent surfaces
• Reduces moisture/condensation at the vent outlet
• Common symptoms: excessive warmth near the console, persistent odors/steam, visible damage, or rattling from a loose/broken tube

• 1 vent tube

• Disconnect power; shut off gas. Allow the appliance to cool completely before servicing.
• Access and attachment points vary by model; refer to your service manual or diagram for location.
• Note the tube's orientation and routing; transfer any brackets or seals from the old part if present.
• Reuse existing screws/clamps and ensure the vent path is clear after installation.

The Oven Rack is an OEM replacement part for GE ranges. It provides an elevated surface for baking, roasting or broiling food inside the oven cavity. 

Causes of a bad rack can include warping or discoloration from exposure to high heat over time. Cracks or breakage may also occur due to mishandling or loading the rack with excess weight. 

Symptoms of a bad oven rack include:

• Food not baking or cooking evenly while on the rack    
• Difficulty sliding the rack in and out of the oven 
• Cracks, bends or broken welds in the rack frame

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replacement bracket that secures a cooktop radiant heating element, restoring stable element positioning and safer operation. Use this bracket when the original is bent, cracked, or no longer holds the element firmly in place. What it does:

• Secures the radiant heating element to the cooktop so the element stays aligned and stable.
• Helps prevent element sagging or movement that can cause uneven heating or rattling.
• Keeps element terminals positioned for proper contact with the cooktop assembly.
• Common service part when the original bracket is bent, broken, or corroded.

• Disconnect power at the breaker and ensure the cooktop and element are fully cool before starting.
• Remove damaged bracket and fasten the replacement using the original screws or clips; confirm element alignment before restoring power.
• Use basic hand tools and avoid overtightening fasteners to prevent bracket or element damage.

This maintop harness routes power and control signals across the cooktop area so burners, switches and igniters can operate reliably. Replacing a damaged harness restores electrical connections and reduces arcing or intermittent operation. What it does:

• Carries power and signal connections for the cooktop/maintop assembly
• Restores reliable electrical paths to burner switches, ignitors and controls
• Fixes symptoms like intermittent burner operation, sparking at connectors, or no power to specific cooktop functions
• Helps prevent shorts caused by frayed or damaged wires

• One maintop wiring harness

• Disconnect all power to the appliance before starting work to avoid shock or injury
• Access typically requires removing the cooktop or control console; keep track of fasteners and wire routing
• Reconnect connectors to matching plugs; ensure secure, fully seated connections and correct routing away from heat sources

This electrical jumper links two terminals within the appliance's wiring to restore proper continuity for the affected circuit. Replace a burnt, damaged, or missing jumper to bring the related function back to reliable operation.

• Bridges terminals to complete or modify an electrical circuit as designed by the manufacturer
• Helps address symptoms like a specific feature not working, intermittent operation, or no power to a component
• Replace if the original shows heat damage, broken leads, or loose connections
• Direct replacement for the original jumper used in the wiring harness

• Disconnect power at the breaker or unplug the appliance before servicing
• Use your model's wiring diagram to locate the correct jumper
• Label/photograph wire positions and transfer one connection at a time
• Ensure connectors are fully seated; do not alter the factory wiring configuration

This broil shield is the oven's rear cavity panel that protects the oven back and nearby components from direct broiler heat. It helps channel heat for safer broiling and prevents heat damage to internal parts. What it does:

• Deflects direct broiler heat away from the oven back wall and components
• Helps maintain proper broiling performance by directing heat toward food
• Reduces risk of heat-related damage, discoloration, or premature wear on internal oven parts
• Limits grease and debris contact with sensitive rear components

• Disconnect power (and gas supply on gas ovens) before servicing the oven
• Remove oven racks and, if required, the broil element to access the shield
• Handle edges carefully—metal parts can be sharp
• Keep hardware removed during disassembly; screw locations for reassembly

This stainless control trim is the exterior trim piece that restores the look of the appliance's control area and helps protect the controls from spills and debris. It provides a clean, finished appearance for damaged or scratched control bezels. What it does:

• Covers and protects the front control area from spills, grease and everyday wear
• Restores a factory-finish appearance to scratched or dented control bezels
• Helps keep buttons and knobs cleaner by diverting surface debris
• Fits in place of damaged trim to reduce drafts and improve panel alignment

• Disconnect power to the appliance before beginning any work.
• Installation typically requires removal of the control panel trim screws; keep track of fasteners.
• Handle edges carefully to avoid cuts and to protect the finish.

This silicon controlled rectifier (SCR) is an electrical switching component used to control power to heating or motor circuits, restoring proper on/off control for affected appliance functions. What it does:

• Regulates power flow in heater and motor control circuits to enable correct cycling
• Helps control startup and run voltage to motors and heating elements
• Commonly linked to symptoms like no power to heater or motor, intermittent operation, or erratic cycling
• Works as a replacement component on control assemblies that use a discrete SCR

• Disconnect all power to the appliance before accessing electrical components
• SCRs are static-sensitive and may require careful handling; use ESD precautions
• May be soldered or mounted to terminals; confirm mounting and connector type before installation

This right-side hinge assembly secures and guides the appliance door for consistent opening and closing, restoring proper alignment and sealing. It's a direct-fit replacement when the door feels loose, binds, or won't stay aligned. What it does:

• Supports the door on the right side and maintains correct pivoting motion
• Restores proper door alignment to improve closing and sealing
• Helps eliminate sagging, binding, or uneven gaps during operation
• Works with existing hinge pins and mounts where applicable

• Replace both hinges if the left-side hinge shows similar wear; balance is recommended for long-term alignment
• Disconnect power and remove any panels or door components per manufacturer instructions before starting
• Use proper tools and keep fasteners organized; tighten to OEM torque if specified

This left door hinge secures and pivots a refrigerator or freezer door so it opens and closes smoothly. Replacing a worn hinge restores proper door alignment and helps the seal close evenly to maintain temperature. What it does:

• Provides the pivot point that supports the door and allows smooth opening/closing
• Restores correct door alignment to help prevent sagging or uneven gaps
• Reduces binding or scraping that can occur with worn or bent hinges
• Helps the door seal fully to reduce cool-air loss and compressor overwork

• Unplug the appliance and empty/secure the door before starting work
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use the existing screws or included hardware as specified by the OEM; tighten fasteners securely

This wire harness connects the oven/stove user interface to the main control, restoring reliable signal and power between the control board and the touchpad/display. Replaces a damaged or worn UI harness to help recover responsive controls. What it does:

• Carries signals and power between the front control (touchpad/display) and the main control board
• Can resolve intermittent or non-responsive buttons, blank or flickering displays, or erratic control behavior caused by damaged wiring
• Maintains proper routing and secure connections to prevent shorts or loss of communication
• Designed to match OEM connector types and wire lengths for a direct replacement

• One wire harness for the user interface

• Always unplug the appliance or shut off power at the breaker before servicing
• Handle connectors gently; align and seat plugs fully to ensure secure connections
• Route the harness along original clips and channels; avoid pinching or contact with sharp edges or heating elements