Jds1860aap Parts

This replacement bezel knob restores the appearance and secure fit of a range or oven control panel. It replaces a cracked, loose, or missing knob bezel to help ensure proper knob seating and a finished look. What it does:

• Centers and secures the control knob on the appliance control panel
• Maintains correct spacing so the knob turns smoothly and seats properly
• Helps prevent debris from entering the knob shaft area
• Commonly replaced for visible cracks, breaks, or when the bezel no longer holds the knob firmly

• One bezel knob

• Disconnect power to the appliance before starting any work
• Typically aligns over the knob shaft and snaps or slides into place; avoid forcing it
• Inspect the knob shaft and surrounding trim for damage and replace if necessary

This replacement screw restores secure fastening for appliance panels and components, helping stop loose parts and rattling so controls and panels stay aligned. Use when original screws are missing, stripped, or damaged. What it does:

• Secures panels, trim, control boards, brackets, or components to the appliance frame
• Stops rattling, vibration noise, and loose or misaligned parts caused by missing or damaged fasteners
• Replaces stripped, corroded, or missing screws to restore proper fit and function
• Matches OEM fit and threading for straightforward hardware replacement when the correct screw is identified

• Turn off power and unplug the appliance before accessing internal components
• Use the correct screwdriver or bit to avoid stripping the head; do not force mismatched drivers
• Tighten until snug—do not overtighten, which can strip threads or crack plastic
• Keep removed hardware organized and verify the replacement screw matches the original before installation

This replacement mounting screw secures panels and small components on compatible Whirlpool appliances, restoring proper fit and reducing rattles or loose parts for a solid, finished appearance. What it does

• Fastens control panels, trim pieces, or internal brackets to the appliance chassis
• Helps stop panel vibration, rattling, or misalignment caused by missing or worn fasteners
• Restores secure attachment after disassembly for service or part replacement
• Simple hardware replacement that maintains original fit and function

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Thread gently and stop when snug — do not overtighten to prevent damage to mating parts
• Keep removed hardware organized to ensure correct reassembly

This surface ignitor lights the burner on compatible gas cooktops and ranges, restoring reliable spark ignition for normal burner operation. Replace a broken or weak ignitor to help restore consistent ignition and safer cooking. What it does:

• Generates the spark that lights the burner when the control is turned on
• Helps ensure quick, consistent ignition and reduces repeated clicking or delayed lighting
• Commonly replaces cracked, burned, or non-sparking ignitors
• Works with the cooktop's existing valve and electronic control to initiate flame

• Always disconnect power and shut off the gas supply before removing or installing the ignitor
• Handle the ceramic and electrode tip carefully—these components are fragile and can crack if dropped
• Reuse existing mounting hardware unless replacement is specified

This glass spacer positions and cushions oven door glass to keep panels aligned and prevent direct glass-to-glass contact. Replacing a damaged spacer restores proper door fit and reduces rattling or uneven sealing. What it does

• Separates and spaces oven door glass panels to prevent rubbing and stress cracks.
• Cushions the glass to reduce vibration and noise during operation.
• Helps maintain even door alignment for a tighter closure and consistent heat containment.
• Commonly replaced when the spacer is worn, cracked, missing, or allowing glass to contact adjacent parts.

• One glass spacer

• Disconnect power to the appliance before starting any repair.
• Handle glass and the spacer with care; wear safety gloves and eye protection.
• Removal/installation typically requires partial door disassembly—retain fasteners and note orientation.
• If door glass is cracked or loose, replace damaged glass to avoid injury.

This insert is a small OEM component designed to fit into a specific location on your appliance to secure, align, or finish an assembly. Replacing a worn, damaged, or missing insert restores proper fit and clean appearance.

• Provides a snug interface or cover within the designated assembly
• Helps prevent looseness, vibration, or gaps in the connected part
• Replaces cracked, worn, or missing insert pieces
• Common symptoms include loose or wobbly parts, misalignment, or a missing cap/cover

• Disconnect power and shut off gas/water before servicing
• Refer to your model's parts diagram to confirm location and orientation
• Use non-marring tools to avoid cosmetic damage
• Seat the insert fully; do not overtighten adjacent fasteners

This electronic control board manages and coordinates your appliance's core functions. Replacing a failed board restores proper response to button presses, accurate cycle timing, and reliable power delivery to motors, valves, heaters, and fans.

• Coordinates cycle selection and timing using inputs from sensors and the user interface
• Distributes power through onboard relays to run loads such as motors, pumps, valves, heaters, and fans
• Monitors system feedback and stores/communicates fault codes when faults are detected
• Common failure symptoms: won't start or respond, cycles won't advance, stops mid-cycle, lights/beeps without action, recurring error codes

• Disconnect power at the breaker or unplug the appliance before service; shut off water/gas if applicable
• Use ESD protection and handle the board by the edges; avoid touching components and solder traces
• Photograph wiring and label connectors; transfer any brackets, shields, or jumpers from the old board
• Ensure all connectors are fully seated, then run a diagnostic or test cycle to operation

This surface burner igniter creates the spark that lights a gas cooktop or range burner. The attached wire lead simplifies hookup and helps restore quick, dependable ignition when a burner won't light or only lights intermittently.

• Generates a high-voltage spark at the burner to ignite gas
• Restores reliable burner lighting and consistent flame startup
• Common symptoms: burner won't ignite, no visible spark, intermittent lighting, or a chipped/cracked ceramic insulator
• Replaces a worn or damaged electrode to eliminate the need for manual lighting

• Disconnect electrical power and shut off gas before servicing
• Allow the cooktop/range to cool; handle the ceramic tip carefully to avoid damage
• Match the igniter position/orientation to the original for proper spark at the burner
• Route the lead away from sharp edges and heat; make a secure connection to the harness, then test for spark before reassembly

This spark module supplies the high-voltage pulses that ignite the surface burners on a gas cooktop or range. Replacing a failing module helps restore consistent clicking and spark so burners light promptly and reliably.

• Supplies high-voltage to up to five surface igniters (5+0 configuration)
• Sends spark when a burner control is turned to Lite
• Failure symptoms can include no spark on all or multiple burners
• May also cause intermittent/weak spark or continuous clicking

• Disconnect power and shut off gas before servicing
• Note wire locations; move one connector at a time to matching terminals
• Mount securely in the original position and ensure proper grounding
• After replacement, if only one burner won't ignite, inspect that burner's switch and igniter

This oven rack replaces a worn, bent or missing shelf inside the oven cavity so cookware sits level and slides in and out smoothly. It restores proper support for baking sheets, pans and cookware for even cooking results. What it does:

• Provides a sturdy shelf for bakeware, pans and roasting cookware
• Keeps cookware level to promote even browning and consistent results
• Replaces warped, bent or damaged racks that won't slide or stay in position
• Helps prevent cookware from tipping or sliding during use

• Install by sliding rack into the desired oven track; no tools typically required
• Allow the oven to cool completely and disconnect power before handling
• Inspect oven track rollers and guides for damage; replace those parts separately if needed
• Handle with care to avoid pinching; racks may have sharp edges

A replacement door hinge that restores proper door alignment and smooth opening and closing. Replaces worn or damaged hinges to help stop door sagging, binding, or poor sealing for safer, reliable operation. What it does:

• Provides the pivot and support that lets the appliance door open and close smoothly.
• Replaces a worn or broken hinge to correct door sag, binding, or uneven gaps.
• Restores proper door sealing and alignment to improve operation and reduce leaks or drafts.
• Matches the form and function of the original hinge.

• Unplug the appliance or disconnect power before starting any repair.
• Support the door while removing/installing the hinge to prevent dropping; have an assistant if needed.
• Use the appropriate hand tools; reuse original fasteners if replacement hardware is not provided.
• After installation, check alignment and operation; tighten fasteners securely but avoid over-torquing.

The Trim Vent is an OEM component specifically designed for Whirlpool ranges. Located at the rear of the unit above the oven cavity, the trim vent serves an important safety and ventilation purpose. 

Constructed of heat-resistant sheet metal with a powder-coated finish, the trim vent features an internal baffle system and a rear-mounted exhaust fan. This facilitates the proper drawing of hot oven air and fumes up and out of the kitchen area. 

This exhaust vent meets all codes regarding flame barrier rating and venting performance. It attaches securely to the framework at the top and back edges. 

Symptoms of a bad trim-vent include:

• Excessive heat and smoke escaping during use  
• Grease or residue buildup inside the vent pathway
• Misaligned vent body not flush or securely seated 

This OEM part fits KitchenAid, Jenn-Air, Amana and select GE range models.

The Grate-Kit is an OEM component specifically designed for Whirlpool electric ranges. It includes the cooking grates and necessary mounting hardware to outfit one or more oven racks. 

Symptoms of worn or damaged grates include: 

• Uneven cooking from hot and cold spots on the grates  
• Foods sticking or burning more easily due to surface deterioration
• Warping, cracking, or breakage of grate wires from high-heat use
• Loose or missing fasteners cause unsafe support of cookware

Causes can be accumulated years of cooking on the grates. Exposure to high temperatures, grease splatters, and occasional mishandling also contribute to normal wear over time.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This stainless-steel trim assembly restores the finished look and protective edge of the appliance fascia. It replaces a damaged, dented, or missing trim piece to help seal and finish the control/vent opening. What it does

• Replaces worn, dented, or scratched trim to restore appliance appearance
• Covers and protects the edge of the fascia or opening from dirt and damage
• Helps keep the control/vent area sealed and neat-looking
• Stops rattles or gaps caused by a loose or missing trim piece

• One stainless-steel trim assembly

• Disconnect power to the appliance before starting any work
• Basic hand tools typically required; remove adjacent panels or fasteners to access the trim
• Handle stainless trim carefully to avoid scratches; use a soft cloth when positioning

This electronic control board manages the oven or range's front-panel functions and oven operation, restoring control of temperature, timers, displays, and cooking cycles when the original module fails. Replace a faulty board to regain normal control functionality. What it does:

• Receives user inputs from the touchpad or knobs and sends commands to heating elements, igniters, and sensors
• Controls oven temperature regulation, bake/broil cycles, timers, and clock functions
• Can stop or prevent the oven from starting if the board is damaged or displaying errors
• Common symptoms: blank or erratic display, unresponsive controls, incorrect oven cycles, or oven not heating as expected

• One electronic control board (W11297274)

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle the board by edges and avoid static discharge; use ESD precautions if available
• Verify wiring harness connections match original locations before reassembly
• If symptoms persist after replacement, check associated components (touchpad, sensors, power supply)