Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix burners that won't light or have intermittent ignition with this range burner igniter switch. Restores reliable spark function to gas cooktop burners.
This is a black cast iron double burner grate that spans two burners on a gas range cooktop, providing a stable surface for pots and pans. It supports cookware over the flames and allows for even heat distribution. Replace this grate if it is cracked, warped, rusted, or if its feet are worn down, causing cookware to sit unevenly.
Fix a burner that won't stay lit or has a weak yellow flame. This venturi tube mixes air with gas for proper combustion. Easy 15-minute repair.
Burner won't light or flame is uneven? The orifice holder secures the gas orifice for proper alignment and reliable ignition. Easy DIY repair in under 30 minutes.
I am a plumber by trade so I was guessing my way through this. It took me a while to figure out that I had to drill out the screws that held the burners in place. The screws were so rusted that I couldn't tell that they were philips. Then I found that I needed to pull the stove out about 5" and put 2x4s under the feet so I could get the screws that hold the top down. I ruined the orfice holders trying to drill out the old screws. I think my entire problem was caused by rust on the pan that the... Read more
Burner won't ignite or flame is weak? This top burner valve controls gas flow to individual burners. Common repair for ignition and flame issues.
If your gas burner won't spark or lights intermittently, the igniter switch may have failed. This direct-fit control restores reliable ignition.
I changed out the white burners for black ones which will be easier to clean. This is a simple matter of removing two screws on each burner. The one igniter switch turned out to be okay, but was not fully seated on the valve shaft. As to lighting off issues, the new burners helped, but the most improvement came from removing the burners and cleaning the orifices that supply gas to the burner tubes with a bit of fine wire. Read more
Black snap nut secures glass panels to oven door frame. Replace if cracked, broken, or worn during door disassembly. Essential for secure door assembly.
Replaced it with the new parts. Read more
Weak or uneven burner flame? This venturi tube channels the gas-air mixture from valve to burner for proper ignition. Straightforward replacement.
Color: White. Size: 13 oz. Spray paint primer. can.
Mounting screw secures panels, brackets, and components inside your oven. Replace missing, stripped, or damaged screws to restore proper fit.
This is an electronic control board with an integrated touchpad overlay for a range oven. It manages oven functions including temperature regulation, cooking modes, and timer settings. Replace this part if the oven does not respond to button presses, displays error codes, or fails to maintain the correct temperature.
Spacer that maintains proper spacing between range components to prevent rubbing and misalignment. Replace if cracked, broken, or missing during repairs.
Replacement 6-32 x 3/8" screw secures panels, brackets, and trim pieces on appliances. Restores proper fastening when original screws are lost or stripped.
Fix burners that won't spark or cross-spark when other knobs turn. This 4-spark ignition module restores reliable gas ignition on cooktops and ranges.
Color: White
I ordered a new door glass from appliancepartspro.com it came within two days, but I forgot to order the 8 pieces of foam tape, assuming it would also be included in with the order, it wasn't, so after waiting for that to arrive, it was fairly easy, job after watching the video. However, the video doesn't tell you the painted side goes on the inside, or that the single sided foam tape goes on the top, and the double sided foam tape goes on the sides, I figured that out from the diagram on my... Read more
This is a small seal that fits around the surface burner control switch on a range, preventing moisture and debris from entering the switch housing. It helps protect the electrical switch components behind the control panel. Replace this seal if it is cracked, deteriorated, or missing, which can allow spills or cleaning liquids to reach the switch and cause erratic burner operation or short circuits.
After disassembling the cooktop and removing the back cover replacement was simple. The replacement switch assembly from Appliance Appliance Parts Pros fit perfectly. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.