Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Control Oven TO9 is an OEM component specifically designed for GE gas ranges. This control board oversees critical oven functions including temperature selection, timers, and safety features. Causes of a bad control board include component failures or degradation over time due to heat exposure during normal oven operations. Physical damage from drops or impacts can also affect board integrity. Symptoms of an incompatible control board include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered new control panel. Almost ordered the wrong overlay but excellent chat support corrected my error. Removed top rear cover behind the display panel, removed three connectors, removed 1/4 screws holding bad control panel and removed it. Affixed new overlay to the new control panel (alignment tabs on right side and bottom of clear plastic display frame). Attached panel with 4 previously removed 1/4 screws plugged connectors to back of panel EXACTLY where they were positioned in the... Read more
Replacement small surface burner for gas ranges and cooktops. Restores proper flame control when original burner is damaged, cracked, or corroded.
Remove and replace Read more
Replace your oven door gasket when frayed, hardened, or heat leaks around the door. Forms an airtight seal to maintain cooking temperatures. Verify fit by model.
The video shown was completely incorrect for the gasket needed on my range. I had to remove the door, disassemble the inside panel, and remove the old gasket. I suggest you have assistance when doing this. Putting on the new gasket was challenging but not impossible for a do it your selfer. You should make a video for this gasket so people don't think it is as easy as pulling a few pins around the window!! Read more
Replace your range's light receptacle socket when the oven light flickers or won't turn on. Easy DIY fix restores proper bulb connection. Confirm fit by model.
Called Appliance Parts - service agent was extremely helpful. Tried to find an assembled piece was unable to do so. Send me the individual parts which were very easy to assemble. Was able to replace entire light assembly, reconnect wire with new terminal end. Light works find just now. Would definitely call again if I needed assistance. Read more
Replaces cracked, broken, or damaged glass oven door assembly on your range. Includes outer glass panel and frame. Essential for safe oven operation.
Surface burners not lighting or clicking continuously? This spark module controls ignition for all burners. Moderate DIY repair with basic tools.
The Burner, Large V2 is an OEM part for GE gas ranges. It is designed to provide a consistent and even flame for cooking, ensuring efficient heat distribution for large pots and pans.
Causes of a bad burner can include clogging from food spills, wear and tear from frequent use, or damage from cleaning processes. A malfunctioning burner can lead to uneven cooking and reduced heating efficiency.
Symptoms of a bad burner include:
Outer glass panel for range oven doors. Replace if cracked, broken, or shattered. Allows viewing food while cooking without opening door.
I do all repairs on my equipment at my house. Read more
Replace your range door handle assembly when end caps detach or seals lose integrity from daily use and cooking vapors. Confirm fit with your model number.
Replacement leveling leg for ranges. Installs at base corners to stabilize and level your range on uneven floors. Needed when leg is broken or missing.
Called GE parts, they said it will take 7-10 days for delivery. Called Appliance parts Pros.com and got them over night. Bought 4 just in case. Read more
Unpredictable or incomplete oven heating? This high voltage electrode and harness assembly transmits electricity to ignition components in your gas range.
The Valve Knob is an OEM part for GE ranges. It is used to control the gas flow to the burners, allowing for precise adjustment of the flame and ensuring proper cooking temperatures.
You should replace the valve knob if it becomes damaged or worn out. Common issues include the knob becoming loose, cracking, or breaking, which can make it difficult to control the gas flow accurately.
Symptoms of a bad valve knob include:
10-32 machine screw secures panels, brackets, door hinges, and handles in ovens and ranges. Replace missing, stripped, or broken screws for tight fit.
All of the information on the web repair sites said "replace the hinges as the springs are worn out." Didn't fix the problem. The top of the door still wouldn't seal, and the. Leaning latch wouldn't catch the door unless you pressed on the door. The inside panel of the door was fatigued. Too many turkeys were set on the door over the years. The hinges are attached to that inside panel, so the stress points were bent over time. I replaced the inside steel panel. Took about an hour. Was able... Read more
The Front Orifice Holder is an OEM component specifically designed for GE range burners. Located under the cooktop, it serves as the mounting bracket that secures the front orifice at the base of each burner head.
Symptoms of a bad front orifice holder include:
Over time and repeated heating cycles, the metal holder can warp or distort from heat exposure. Motion from burner head adjustment may also cause bracket weakness. This genuine GE replacement part installs with ease and ensures precise positioning of flame origination points. Proper orifice placement afforded by the front holder optimizes burner combustion and safety. Compatible GE, Kenmore, and select electric range brands include Monogram, GE Café, and Profile models.
Replacement tube, box wrench and rachet and socket. very carefully the tubing can pinch and break. Read more
Replace a cracked, stripped, or missing surface burner control knob on your gas range. Mounts on the valve stem to control flame level and settings.
Ordered a new burner knob from you. Read more
Black trim piece that installs at the bottom edge of your range oven door. Replace if cracked, rusted, broken, or missing to restore appearance.
I lifted up the door and removed it. Next, I laid out newspaper on the floor. I placed the door on the newspaper upside down. With my socket driver, I removed the bottom door trim. I then used a pocket knife to remove the remaining glass in the top groove. I then slid in the new glass and reinstalled the trim. It took 30 minutes to replace the glass and clean up the glass fragments from the previous door glass. I looked up a video on how to replace it Utube. Personal safety equipment - Safety... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.