Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix a burner that won't ignite or produce gas with this surface burner valve. Controls gas flow to individual burners on your gas range or cooktop.
10-32 machine screw secures panels, brackets, door hinges, and handles in ovens and ranges. Replace missing, stripped, or broken screws for tight fit.
All of the information on the web repair sites said "replace the hinges as the springs are worn out." Didn't fix the problem. The top of the door still wouldn't seal, and the. Leaning latch wouldn't catch the door unless you pressed on the door. The inside panel of the door was fatigued. Too many turkeys were set on the door over the years. The hinges are attached to that inside panel, so the stress points were bent over time. I replaced the inside steel panel. Took about an hour. Was able... Read more
Burner orifice spud regulates gas flow to the burner on your range or cooktop. Replace if missing, damaged, or when converting between LP and natural gas.
I bought a new orifice and installed it. Read more
Burner orifice spud for gas ranges. Controls gas flow to each burner. Replace if cracked, clogged, or when converting between LP and natural gas.
Myself Read more
Replacement drawer support bracket for your range's storage or broiler drawer. Installs on the drawer rail to prevent sagging, crooked alignment, or binding.
Fix stiff knobs or poor flame control on your gas range. This surface burner valve assembly regulates gas flow for smooth ignition and consistent heat.
I took picture before so that I would not connect the wiring wrong. Read more
LP gas orifice spud for converting gas range burners from natural gas to propane. Replace if missing, damaged, or switching fuel types on cooktop.
AppliancePartsPros identified problem and needed parts. Repairman installed new spuds. Read more
Oven door won't close properly or seal tight? This hinge receiver bracket anchors the door hinge arm to the frame, ensuring proper alignment and seal.
Range door won't stay closed or self-clean won't start? This door latch assembly engages the strike for secure closure and safe operation.
Protective overlay that covers your gas range control panel display and buttons. Replace if cracked, peeling, or worn to restore panel appearance.
Ordered new control panel. Almost ordered the wrong overlay but excellent chat support corrected my error. Removed top rear cover behind the display panel, removed three connectors, removed 1/4 screws holding bad control panel and removed it. Affixed new overlay to the new control panel (alignment tabs on right side and bottom of clear plastic display frame). Attached panel with 4 previously removed 1/4 screws plugged connectors to back of panel EXACTLY where they were positioned in the... Read more
Replacement power cord for gas ranges. Connects your unit to the wall outlet. Replace if cord is worn, cut, heat-damaged, or causing burning smells.
I purchased a new power cord and installed it myself. Read more
Carries gas from the pressure regulator to the burner valve manifold on your gas range. Replace if the tube is damaged, cracked, or leaking to restore safe fuel flow.
Replaced the manifold supply tube. I have to say the shipping is very, very fast!!!! Read more
Fixes burner that won't ignite or produces weak flame. This orifice holder routes gas from valve to burner head. Moderately easy DIY repair for most.
My only option to get the natural gas orifices was to buy the tubing with it. This was easy; I simply switched out the lp orifices with the natural gas using a socket. However, I still found one burner not lighting. I came to find out by looking underneath the top that the tubing was broken. So I lucked out on needing the tube holder for that burner. But I will mention, it would still be nice if I could have found the natural gas orifices sold separately. No one sells these separately from the... Read more
Safety bracket that anchors your range to the floor or wall, preventing tip-over. Replace if missing, damaged, or cracked to secure the appliance.
Replaced the water filter head. Read more
Replace your gas range oven orifice holder if burners won't light or you're converting between LP and natural gas. Simple socket wrench repair for most DIYers.
Center burner won't light or has weak flame? This orifice holder routes gas from the valve to the burner and keeps the orifice aligned for proper ignition.