Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix oven ignition issues or gas smell problems with this valve control assembly. Controls gas flow to burners for precise flame regulation.
Gas valve and ignitor Read more
10-32 machine screw secures panels, brackets, door hinges, and handles in ovens and ranges. Replace missing, stripped, or broken screws for tight fit.
All of the information on the web repair sites said "replace the hinges as the springs are worn out." Didn't fix the problem. The top of the door still wouldn't seal, and the. Leaning latch wouldn't catch the door unless you pressed on the door. The inside panel of the door was fatigued. Too many turkeys were set on the door over the years. The hinges are attached to that inside panel, so the stress points were bent over time. I replaced the inside steel panel. Took about an hour. Was able... Read more
Fix a burner that won't ignite or produce gas with this surface burner valve. Controls gas flow to individual burners on your gas range or cooktop.
Burner orifice spud regulates gas flow to the burner on your range or cooktop. Replace if missing, damaged, or when converting between LP and natural gas.
I bought a new orifice and installed it. Read more
Burner orifice spud for gas ranges. Controls gas flow to each burner. Replace if cracked, clogged, or when converting between LP and natural gas.
Myself Read more
Replacement drawer support bracket for your range's storage or broiler drawer. Installs on the drawer rail to prevent sagging, crooked alignment, or binding.
Oven door won't close properly or seal tight? This hinge receiver bracket anchors the door hinge arm to the frame, ensuring proper alignment and seal.
Fix stiff knobs or poor flame control on your gas range. This surface burner valve assembly regulates gas flow for smooth ignition and consistent heat.
I took picture before so that I would not connect the wiring wrong. Read more
LP gas orifice spud for converting gas range burners from natural gas to propane. Replace if missing, damaged, or switching fuel types on cooktop.
AppliancePartsPros identified problem and needed parts. Repairman installed new spuds. Read more
Range door won't stay closed or self-clean won't start? This door latch assembly engages the strike for secure closure and safe operation.
This is a genuine OEM replacement nut that is used on convection oven fans. This nut holds the fan onto the spindle. If the nut becomes lost during repairs to the fan, it will need to be replaced before the fan will work. This nut locks the fan to the spindle to turn and move the air around inside the oven. The fan helps the food to cook more evenly and reduces areas in the oven that are not cool enough or hot enough. If the fan is not working, the convection oven will not cook correctly.Convection ovens are different from regular ovens, and the fan is part of the reason. Convection ovens use the fan and an exhaust system to move the heat around inside the oven to cook food more evenly and faster. Many convection ovens have a setting that allows the oven to be used as a regular oven. If the nut is missing and the fan is inoperable, the oven can be used for regular cooking if it has this feature. Otherwise, the convection oven should not be used until the nut is replaced.This nut is a silver metal replacement part that is sold individually. It is designed for use in convection ovens made by GE and Kenmore.
I took the cover off and the fan had separated from the bushing. Ordered a new fan and nut and it took all of 5 minutes to replace. Probably saved $159.99 service call repair and that is with a coupon. Any one can do this repair, just make sure the oven is cold as you will come in contact with metal parts. Read more
Fix oven display errors (F4, F5 codes), failure to heat, or random shutdowns. This control board operates all heating and cooking modes. Moderate DIY.
Watching YouTube videos Read more
Carries gas from the pressure regulator to the burner valve manifold on your gas range. Replace if the tube is damaged, cracked, or leaking to restore safe fuel flow.
Replaced the manifold supply tube. I have to say the shipping is very, very fast!!!! Read more
Safety bracket that anchors your range to the floor or wall, preventing tip-over. Replace if missing, damaged, or cracked to secure the appliance.
Ok, it took 30 minutes to get done. Read more
Fixes burner that won't ignite or produces weak flame. This orifice holder routes gas from valve to burner head. Moderately easy DIY repair for most.
My only option to get the natural gas orifices was to buy the tubing with it. This was easy; I simply switched out the lp orifices with the natural gas using a socket. However, I still found one burner not lighting. I came to find out by looking underneath the top that the tubing was broken. So I lucked out on needing the tube holder for that burner. But I will mention, it would still be nice if I could have found the natural gas orifices sold separately. No one sells these separately from the... Read more
Replace your gas range oven orifice holder if burners won't light or you're converting between LP and natural gas. Simple socket wrench repair for most DIYers.