Jgd8310ads Parts

This is a single spark ignition switch used on gas ranges and cooktops. It detects when a burner control knob is turned and sends a signal to the spark module to ignite the gas. Replace this switch if a burner will not spark when the knob is turned, or if the igniter clicks continuously even when the burner is not in use.

Fixes burner knob that won't turn, push down, or ignite. This gas valve controls flame height and regulates gas flow to one surface burner on your cooktop.

If your gas burner won't ignite or flame height is inconsistent, the burner valve likely needs replacement. Moderate DIY repair requiring panel removal.

This is a black cast iron double burner grate that spans two burners on a gas range cooktop, providing a stable surface for pots and pans. It supports cookware over the flames and allows for even heat distribution. Replace this grate if it is cracked, warped, rusted, or if its feet are worn down, causing cookware to sit unevenly.

Fix a burner that won't stay lit or has a weak yellow flame. This venturi tube mixes air with gas for proper combustion. Easy 15-minute repair.

If your gas burner won't spark or lights intermittently, the igniter switch may have failed. This direct-fit control restores reliable ignition.

This double valve switch assembly controls two valve circuits to manage water flow and valve operation in compatible appliances. It replaces a failed switch to restore proper valve control and appliance function. What it does:

• Acts as the electrical switching assembly for two valve solenoids or circuits
• Allows the appliance control board to open and close water valves as needed
• Commonly linked to symptoms like no fill, continuous fill, or intermittent valve operation
• Helps stop erratic or unresponsive valve behavior when the original switch fails

• One double valve switch assembly

• Disconnect power (and water, if applicable) before beginning any repair
• Verify power is off with a meter and document wire locations or take photos before disconnecting
• Handle connectors carefully; ensure proper seating and secure mounting during reassembly

Weak or uneven burner flame? This venturi tube channels the gas-air mixture from valve to burner for proper ignition. Straightforward replacement.

Mounting screw secures panels, brackets, and components inside your oven. Replace missing, stripped, or damaged screws to restore proper fit.

Replacement control knob for cooktop control shaft. Install a new knob if your original is cracked, stripped, broken, or missing to restore secure grip.

Secures burner assemblies and internal panels on gas cooktops. Replace if bracket is cracked, bent, or missing to restore stable mounting and alignment.

Replacement 6-32 x 3/8" screw secures panels, brackets, and trim pieces on appliances. Restores proper fastening when original screws are lost or stripped.

This locknut is a small threaded retaining nut used to secure rotating and stationary appliance components, helping keep assemblies tight and stable during operation. It prevents parts from loosening and reduces vibration-related issues. What it does:

• Secures shafts, pulleys, or fittings to prevent axial movement
• Keeps assemblies fastened under normal vibration and load
• Helps stop wobble, grinding, or part separation caused by a loose connection
• Works with the matching threaded stud, shaft, or fitting for a proper hold

• Disconnect power and follow appliance safety procedures before servicing
• Use the matching thread size and engage threads fully; hand-start before tightening
• Tighten securely without overtightening; use the correct driver or socket for the nut
• Inspect mating threads and replace if damaged

Fix a cooktop burner that won't light with this spark igniter switch. Solves clicking but no ignition issues. Moderate DIY repair, typically 30-45 minutes.

Color: Black.

Fix a cooktop with burners not heating or control panel malfunctions with this wire harness. Moderately easy repair that restores electrical connections.