Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

Jgp630 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Cooktop Burner Bowl Seal
Genuine Ge part
By: Ge
Part Number: WB32M8

Seals the burner bowl on gas cooktops to prevent gas leaks and improve efficiency. Replace when crumbling, worn, or after bowl removal. Confirm fit.

Do-It-Yourself Stories from Customers like You I needed to remove the drip pans in a gas cooktop in order to remove the cooktop surface in order to replace an igniter switch while at it i replaced two corroded drip pans   Betsy M. • Richmond , VA • June 05, 2016

I wrote this short article on my repair procedure. I hope that you'll be able to use it. Replacing Drip Pans in a Sealed-Burner Gas Cooktop or Range Sealed burner drips drip pans (burner bowls) are attached to aluminum burners with steel screws that can corrode and bond into the aluminum, thereby making it impossible to remove the screws with a screw driver. Years of boil-overs that leave liquid trapped in the hot, moist environment under the burner trim rings increase the rate of... Read more

More
Best Seller
Spark Switch Assembly
Genuine Ge part
By: Ge
Part Number: WB18T10338

The Spark Switch Assembly is an OEM replacement part for GE gas ranges. It helps ignite gas burners safely during cooking. Includes all five switches and harness 

Causes of a bad spark switch assembly can include electrical malfunctions, wear and tear from regular use, or damage from exposure to heat and moisture. Physical damage or corrosion can also impair its functionality.

Symptoms of a bad Spark Switch Assembly include:

  • Burners not igniting or taking longer to ignite
  • No clicking sound when turning the burner knob
  • Continuous clicking even after the burner is lit
  • Inconsistent sparking

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Faulty regulator leaky valve   Ron K. • N. Hartland , VT • March 09, 2015

Replaced regulator replaced gasket Read more

More
Range Lp Gas Burner Orifice Spud
Genuine Ge part
By: Ge
Part Number: WB28K10214

This small threaded component controls gas flow to LP gas burners and is located within the burner assembly. Replace when burners produce yellow flames, won't ignite properly, or have uneven flame patterns.

Do-It-Yourself Stories from Customers like You Improper flames and igniton   Kyle S. • Cecilton , MD • January 15, 2020

I actually fixed the issue by poking out the orifices and clearing the hole but the customer wanted to replace it anyway. Read more

More
Surface Burner Valve Switch (Spark Ignition)
Genuine Ge part
By: Ge
Part Number: WB24K5078

This surface burner valve switch mounts on the gas valve stem and signals the spark module when you turn the knob. Replacing a faulty switch restores consistent clicking and reliable ignition on the affected cooktop burner. What it does:

  • Mounts to the surface burner gas valve and closes the ignition circuit when the knob is turned to Lite
  • Sends power to the spark module to create the clicking needed to ignite the flame
  • Symptoms may include: burner won't spark, intermittent ignition, continuous clicking with knobs off, or a burner lights only when another knob is turned
What's included:
  • One valve switch
Install notes:
  • Disconnect electrical power and shut off gas supply; allow the cooktop/range to cool
  • Remove the knob and front panel or manifold cover to access the valve area
  • Note wire positions, transfer the wires to the new switch, and secure it on the valve stem in the same orientation
  • Reassemble, restore power and gas, then test burner ignition

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Clicking from ignitor mode would not stop after burner lit   Jeffrey Maclachlan V. • Nederland , CO • September 03, 2017

Turned out the little switches on the knob shaft had corroded and were staying on. There was constant continuity showing with an ohm meter. Replacing the switches was very easy (always disconnect power to the unit before servicing). Bought a new ignitor module as a backup as they do go out of production after 10 years or so- another cheap and easy fix if needed in the future. Read more

More
Cooktop Control Knob And Clip Assembly
Genuine Ge part
By: Ge
Part Number: WB03T10219

White control knob and clip assembly for cooktop burner controls. Replaces broken, cracked, or missing knobs that no longer grip the valve shaft securely.

More
Knob & Clip Assembly
Genuine Ge part
By: Ge
Part Number: WB03T10217

Color: black. Measures about 2 inches in diameter.

Do-It-Yourself Stories from Customers like You Missing knobs   Christine E. • Anderson , IN • December 29, 2014

I am so grateful I called because the numbers we had read on the bottom for the model number were inaccurate. She sent the right knobs and they work beautifully. Read more

More
Cooktop Gas Burner Valve
Genuine Ge part
By: Ge
Part Number: WB21X22040

Fix a jammed or broken burner that won't light or adjust properly. This gas valve controls flame height on your cooktop. Moderate difficulty repair.

More
Burner Bowl Bl
Genuine Ge part
By: Ge
Part Number: WB31M7

 

More
Knob & Clip Asm (Ge-B
Genuine Ge part
By: Ge
Part Number: WB03T10218

 

More
Seal Cntl (Bqt)
Genuine Ge part
By: Ge
Part Number: WB04T10041

 

More
Igniter
Genuine Ge part
By: Ge
Part Number: WB13K5051

 

Do-It-Yourself Stories from Customers like You Igniter did not work plus the bowls were cruddy and discolored from close to 20 years of use   John Y. • Rowland Heights , CA • April 16, 2017

Removed bowls and replaced with new ones. Appliance Parts Pros shipping was lightning fast. I was extremely happy with my replacing parts. Will definitely buy from them in the future. Read more

More
Top Burner Valve Screw
Genuine Ge part
By: Ge
Part Number: WB1X1121

 

More
Screw - Pkg 12
Genuine Ge part
By: Ge
Part Number: WB1X1420D

 

Do-It-Yourself Stories from Customers like You Constant sparking even when no burners turned on and when disconnect the valve switches   Michael S. • Cincinnati , OH • August 15, 2015

Had to replace the igniter module. Some key things I came to learn: 1. If you remove the bottom drawer, you can find an envelope there that is for the technician. It explains some things about how the igniter senses the flame, and some advice about diagnosis. 2. The igniter module on my model of slide-in range is located inside a box that is visible when you remove the bottom drawer. No need to slide the range out. 3. At each gas valve, there is a separate valve switch WB13ML or similar. It is... Read more

More
Washr - Pkg 12
Genuine Ge part
By: Ge
Part Number: WB1X1421D

 

Do-It-Yourself Stories from Customers like You Constant sparking even when no burners turned on and when disconnect the valve switches   Michael S. • Cincinnati , OH • August 15, 2015

Had to replace the igniter module. Some key things I came to learn: 1. If you remove the bottom drawer, you can find an envelope there that is for the technician. It explains some things about how the igniter senses the flame, and some advice about diagnosis. 2. The igniter module on my model of slide-in range is located inside a box that is visible when you remove the bottom drawer. No need to slide the range out. 3. At each gas valve, there is a separate valve switch WB13ML or similar. It is... Read more

More
Regulator
Genuine Ge part
By: Ge
Part Number: WB21X465

 

More
Burner Cap (Bsq)
Genuine Ge part
By: Ge
Part Number: WB29K10003

Small size. Color: Taupe, used for Bisque models. Measures about 2-1/2 inches in diameter.

Do-It-Yourself Stories from Customers like You Just wanted to stove to look more like brand new   James J. • Summerfield , FL • February 14, 2015

Physical appearance by replacing burner caps and burner grate. My wife is a cleaning machine. Only probelm is the grates and caps get slight burn marks on them that are hard to clean. I may try your ceramic cleaner to see if that works better than elbow grease. Read more

More
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store