Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
First, the reader should know that the oven is a GE wall oven, model JKS05P1 and it was 22 years old when I made the repair. I bought the door seal from Appliance Parts Pros so used the directions in the Q&A for this part. I loosened the screws as directed, but the old seal wouldn't budge. I searched online for other directions and discovered the screws needed to come out and the inner-liner needed to be pulled forward just a bit. This relieved pressure on the old seal and it was then easy... Read more
We purchased the new Broil Element - were told they would ship the same day - they did - with super fast shipping- well pleased with their service. Read more
Had to remove old glass shards, and reflector tape. Would recommend pliers. I used a utility knife and gloves. Then removed the screws on the top section of outer glass trim. This allowed me to install the metal handle brackets inside and partially behind the trim piece, before securing to new glass. During this time, I did settle the new piece of glass in the bottom track of the outer trim. I also the installed the new heat. reflector tape to the top inside edge of the door. Had to leave some... Read more
Removed oven door, slid entire oven out of cabinet about 4 inches, removed 2 screws attaching hinge, replaced hinge. Very straight forward. Read more
Right hand side. For left hand use WB14K5007
Lower back
The fan was straightforward unscrew and disconnect wires then reinstall. The gaskets required the door to be disassembled contrary to the video that was provided when purchasing the gasket for the door. Disassembly was not hard just take a lot of pictures so you get everything back into the correct place. Also, a good time to clean door frame and wash the glass. Read more
Wiring may not be the same as original clock, may require installation by a appliance service person.
I finally ordered the control board after I had resorted to banging the blank space next to the display with my fist. The oven had been shutting off after reaching temperature, sometimes after a few minutes and sometimes almost immediately. I had tried shutting the circuit breaker off and then back on but this didn't seem to really help. The control board arrived just a couple days after I ordered it and had installation instructions enclosed in the box. I first turned off the circuit... Read more