Jmcdavittlaurelhillcom Parts

The Screw is an OEM part for Whirlpool appliances. This specific screw is used in various locations within Whirlpool appliances, securing components and ensuring the stability and proper alignment of parts. It is designed to fit precisely and maintain a firm hold, contributing to the overall functionality and safety of the appliance.

Over time, screws can become worn or stripped due to regular use, corrosion, or over-tightening. 

Causes of a bad screw include wear and tear, exposure to moisture leading to rust, and over-tightening which can strip the threads.

Symptoms of a bad screw include:

• Loose or wobbly components
• Misalignment of parts
• Noise due to vibrating or loose parts
• Difficulty in securing or removing the screw

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Turntable Motor is an OEM part for Whirlpool microwave ovens. It is responsible for rotating the turntable or carousel tray inside the microwave, ensuring even heating and cooking of food.

Causes of a bad Turntable Motor can include wear and tear over time, lack of proper lubrication, or issues with the motor's bearings or electrical connections.

Symptoms of a bad Turntable Motor may include:

• The turntable not rotating or spinning erratically
• Loud grinding or squeaking noises during operation
• Potential uneven heating or hot/cold spots in food

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Screw for side trim.

This door interlock microswitch detects when the microwave door is fully closed and allows the unit to run only under safe conditions. Replacing a worn switch restores reliable starting and consistent operation tied to the door latch.

• Monitors the door-latch position and completes the safety interlock circuit when the door is closed
• Helps prevent operation with the door open
• Common symptoms: microwave won't start or stops when the door is moved; requires pushing/jiggling the door to run
• Contributes to "runs but no heat" or light/fan behavior that changes as the door is opened/closed

• Unplug the microwave before service; internal high-voltage components can retain a dangerous charge
• Access the switch at the door-latch assembly; transfer wires one at a time to the new switch to maintain correct positions
• Ensure the actuator aligns with the door latch and that the switch clicks freely when opening/closing the door
• After reassembly, test with a microwave-safe cup of water to ensure proper operation

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

• Fastens panels, brackets, covers, or internal parts to the chassis or frame
• Helps maintain alignment and support, reducing rattle, vibration, or looseness
• Replaces missing or damaged screws that have backed out, broken, or stripped
• Restores secure mounting after service when original hardware is lost

• Disconnect power; shut off water or gas supplies before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Match length and thread to the original location; do not substitute with longer hardware
• Tighten snugly; do not overtighten into plastic or thin metal

This line fuse protects the appliance's incoming power circuit by opening if an overload or short occurs. Replacing a blown fuse can help restore power once the underlying issue is corrected, preventing further damage to sensitive components.

• Interrupts line voltage when excessive current or a short circuit is detected
• Typical symptoms: unit completely dead, no display or interior lights, won't start or run
• Fuse tests open/no continuity with a multimeter when blown
• A blown fuse often points to another fault that must be addressed

• Disconnect power at the breaker/unplug before servicing; microwaves contain high-voltage parts that can retain a dangerous charge even when unplugged
• Replace only with the same type and rating as the original fuse
• Ensure the fuse seats firmly in its holders; do not bypass or jumper a fuse

The Microwave Gas Sensor is a vital component for maintaining the safety and efficiency of your microwave. This genuine OEM part is specifically designed to work seamlessly with Samsung microwave models, ensuring a perfect fit and optimal performance. The sensor continuously monitors gas levels within the appliance, helping to detect any irregularities that could pose safety risks. By accurately identifying gas leaks or malfunctions, it plays a crucial role in preventing potential hazards in your kitchen. Installing the Microwave Gas Sensor is straightforward, making it an ideal choice for DIY repairs. Replacing a faulty sensor with this genuine OEM part restores your microwave's reliable operation, giving you peace of mind and extending the life of your appliance. Trust in the quality and compatibility of this gas sensor to enhance the functionality and safety of your Samsung microwave.

Bottle with brush. Color: Black. Size: 0.6 fl.oz.

This factory fastener secures appliance components so panels, brackets, and handles stay tight and aligned. Replace a missing or stripped screw to stop rattles and keep assemblies firmly in place.

• Fastens appliance parts such as panels, brackets, trim, or hardware
• Replaces a missing, loose, or stripped fastener
• Helps eliminate vibration noise and wobbly components
• Restores proper alignment and secure mounting

• Disconnect power; for water- or gas-connected appliances, shut off supply lines before service
• Match length/thread to the original location; start threads by hand to avoid cross-threading
• Use the correct driver bit to prevent stripping the head
• Tighten snugly; do not overtighten into plastic or thin sheet metal

This turntable support ring, also called a roller ring, sits under the microwave glass tray and lets it rotate smoothly for even heating. Replace when the tray stalls, wobbles, rides rough, or makes scraping noises. What it does:

• Supports and guides the glass turntable as it rotates
• Helps maintain smooth, level movement for consistent cooking
• Wear or damage can cause the tray not to turn, wobble, scrape, or slip off track
• Useful to inspect if turntable rotation is intermittent or noisy

• 1 turntable support ring

• Disconnect power before servicing; unplug or switch off the circuit breaker
• Remove the glass tray, lift out the old ring, and clear any debris from the oven floor
• Position the new ring correctly (rollers downward), reinstall the tray, and test rotation
• Do not operate the microwave without the ring and tray properly seated

This removable cooking rack is designed for use during convection or combination cycles in compatible microwave ovens. It elevates food for proper airflow and browning, restoring full cooking capacity when the original rack is missing or damaged.

• Provides a stable, elevated surface for cookware in convection and combo-cook modes
• Improves air circulation for more even baking/roasting during convection cycles
• Replaces a lost, bent, or pitted rack that can lead to arcing or uneven results
• Supports two-level cooking when permitted by your model's instructions

• Allow the oven to cool before handling; remove the old rack and clean the support areas
• Seat the rack on the designated guides/hooks and ensure it is level and not touching cavity walls
• Use only as directed in your owner's manual; improper placement or cycle selection can cause arcing/sparking

This release rod links the push-button to the latch mechanism so the microwave door opens when pressed. Replacing a bent or broken rod restores smooth, consistent door release and proper latch operation.

• Transfers motion from the door-open button to the latch levers to release the door catch
• Helps ensure the door opens promptly when the button is pressed
• Common symptoms: button does nothing or feels loose, door hard to open, intermittent opening
• Often fails due to wear, misalignment, or a dislodged linkage

• Disconnect power; microwaves contain a high-voltage capacitor that can retain a dangerous charge
• Remove the upper grille and control panel to access the latch/button linkage
• Note the rod's routing and any clips; transfer reusable hardware and match original orientation
• After reassembly, verify door switch alignment and test for smooth opening before use

This power supply board, sometimes referenced as the SMS module, provides regulated low-voltage power for the appliance's control system. Replacing a failing board restores power to the controls so the unit turns on and runs reliably.

• Converts AC line power into stable low-voltage DC for control electronics and the user interface
• Distributes power to critical control circuits and relays
• Helps protect sensitive components from voltage irregularities
• Common symptoms: no lights or display, unresponsive controls, won't start, intermittent power loss

• Disconnect power at the breaker and verify no voltage is present before servicing
• Handle the board by the edges and use ESD protection
• Photograph/label connectors; transfer wiring one at a time to avoid misrouting
• Ensure all connectors are fully seated and the board is secured before restoring power and testing

Replacement turn shaft that supports and transmits rotational motion in the appliance's turn mechanism, restoring smooth, aligned rotation for the driven assembly. Factory-style replacement designed for direct fit. What it does

• Provides a stable rotating axis for the appliance's turn/rotation assembly.
• Restores smooth, consistent rotation and helps reduce binding or rough movement.
• Replaces worn or damaged shafts that can cause noise, slipping, or failure to turn.
• Works with the original mounting points to maintain proper alignment of the driven component.

• Always disconnect power (and water, if applicable) before beginning any repair.
• Access may require removing panels or assemblies; follow the manufacturer's service manual for safe disassembly.
• Inspect nearby bearings, bushings, and clips and replace if worn to prevent premature failure.

The Cooking Tray for Microwave and Hood Combo is an essential component designed to enhance the performance of your microwave and hood combination. This genuine OEM part ensures a perfect fit and seamless integration with your appliance, maintaining the high standards you expect from Samsung. Crafted from durable materials, the tray provides reliable support during cooking, promoting even heat distribution and helping to prevent spills and messes. Its sturdy construction ensures long-lasting use, allowing you to cook with confidence and ease. The Cooking Tray for Microwave and Hood Combo is easy to install, making it a convenient replacement if your original tray is damaged or worn. This compatibility with a range of Samsung microwave and hood combo models ensures that you can quickly restore your appliance's functionality without any hassle. By choosing this genuine OEM part, you are investing in quality and performance, ensuring that your kitchen appliance continues to deliver excellent results every time you cook.

This replacement cookware piece is designed for use inside compatible appliances to provide the correct, heat-resistant cooking surface. Restore performance and safety when the original accessory is lost, warped, or damaged. What it does:

• Provides the proper cooking surface intended for your unit
• Supports even heating and consistent results when used as directed in the owner's manual
• Restores stability and fit if the original piece is bent or worn
• Common symptoms: missing accessory, uneven or inconsistent results, wobbling or poor fit

• 1 cookware piece

• Check your model's manual for approved uses, placement, and any preheating directions
• Use oven mitts and allow the cookware to cool before handling or cleaning
• Do not use if cracked, chipped, or warped; replace to avoid poor results or breakage
• Clean with non-abrasive methods recommended by the manufacturer; avoid thermal shock