Js645el2rs Parts

This control panel gasket seals the cooktop/console area to keep moisture, grease and crumbs out of the range control cavity for cleaner operation and improved component protection. Replaces a worn or missing console seal to reduce debris buildup and possible shorting. What it does:

• Forms a tight seal between the control panel and console to block grease, spills and food particles.
• Helps prevent moisture and debris from reaching electronic controls and switches.
• Reduces rattling or movement by cushioning the control panel.
• Commonly replaced when torn, flattened, missing, or allowing visible gaps at the control area.

• Disconnect power to the appliance before starting any work.
• Removal typically requires lifting or removing the control surface—follow the range/oven service instructions.
• Clean mating surfaces of old adhesive, grease and debris before installing the new gasket.
• Align gasket carefully and press firmly; replace any fasteners or adhesive strips used by the manufacturer.

This door insulation replaces the inner thermal pad that helps block heat transfer through the oven door, improving temperature stability and reducing exterior door heat. Fits behind the inner door panel to restore proper insulation. What it does

• Replaces the oven door's internal insulation to help maintain oven temperature and improve heating efficiency.
• Reduces exterior door surface heat for safer operation and lower cabinet heat exposure.
• Helps prevent heat loss that can cause longer preheat times or uneven baking.
• Fits behind the inner door panel and works with the door's liners and glass to insulate the cooking cavity.

• One oven door insulation piece as shown.

• Always disconnect power at the breaker and allow the oven to cool completely before servicing.
• Remove the oven door and inner door panel per the manufacturer's instructions to access the insulation.
• Handle insulation with gloves and avoid compressing or tearing the material; position it flat against the inner panel.
• If any mounting clips, screws, or inner door glass were removed, keep parts organized and reassemble.

This drawer body assembly is the main plastic bin that holds produce and other refrigerated items, restoring proper storage and organization in the refrigerator. It replaces a cracked, warped, or missing crisper bin to help contain spills and maintain usability. What it does:

• Provides the primary storage bin for fresh food and produce in the refrigerator
• Replaces cracked, broken, or warped drawer bodies that no longer slide or seal correctly
• Helps contain spills and prevents items from falling onto lower shelves
• Restores alignment so the drawer opens and closes smoothly

• Remove food and existing drawer; lift out old assembly and slide the new drawer into place
• No tools typically required for drop-in replacements, but keep track of any rail clips or fasteners
• Clean interior surfaces before installing to ensure proper seating and sealing
• Disconnect power only if required by your refrigerator's service instructions; follow OEM safety guidelines

The Insert Plug is an OEM part for GE electric ranges and cooktops. It serves to seal any unused gas orifices to prevent leaks, drafts, and infiltration of foreign materials.

Symptoms of a faulty or missing plug include: 

• Gas leaks discernible by smell around unlit burner ports
• Drafts affecting oven or broiler performance  
• Contaminants obstructing gas flow or pilot ignition

Causes are typically loose or lost plugs from normal use and cleaning over time. Replacing with this genuine GE part restores safety and maximum efficiency. Compatible models include Hotpoint, RCA, and select Kenmore lines as well - securing all openings protects both you and your appliance. Avoid future issues and keep cooking functions running optimally.

This door frame side is a replacement side trim piece for refrigerator doors that restores the door's edge finish and helps maintain a proper fit. It updates worn, cracked or damaged trim for a cleaner-looking door. What it does

• Replaces a damaged or cracked door frame side to restore proper door alignment and appearance
• Helps close gaps between the door and cabinet that can cause cold air leakage when trim is broken
• Covers and protects the door edge and mounting points from further wear
• Useful when the existing side trim is dented, split, or cosmetically damaged

• One door frame side piece

• Unplug the appliance or disconnect power before starting any repair
• Remove the door or inner liner per the service manual to access fasteners, if required
• Use appropriate hand tools; avoid over-tightening fasteners to prevent cracking the trim

This metal mounting bracket secures a radiant heating element to the cooktop so the element stays aligned and stable during use. It restores proper fit and reduces movement that can cause intermittent contact or uneven heating. What it does:

• Holds the radiant heating element in place to prevent movement or sagging
• Keeps electrical contacts aligned to reduce arcing, flicker, or intermittent heating
• Helps maintain even heat distribution by stabilizing element position
• Replaces a bent, broken, or missing bracket that allows the element to shift

• Disconnect power at the breaker before servicing the cooktop to avoid shock
• Handle the glass cooktop and element carefully to avoid cracking or injury
• Verify correct bracket orientation and mounting location before tightening hardware
• Use basic hand tools; if the element or wiring is damaged, replace those parts.

This control bracket secures the appliance control/module in place, keeping the control board stable and aligned for reliable operation. It replaces a worn or broken mounting bracket to restore proper support for the control assembly. What it does:

• Provides a secure mounting point for the control board or control module
• Keeps electrical connections aligned to prevent stress and intermittent contacts
• Helps reduce vibration and movement-related symptoms like loose/control panel wobble
• Supports correct placement during panel reassembly after repairs

• Install with power disconnected; turn off circuit breaker or unplug the appliance before starting
• Handle the control board and connectors with care to avoid damage from static or force
• Use existing fasteners or OEM-recommended screws; confirm bracket orientation before tightening

This front trim frame restores the finished edge and appearance of the appliance door or control opening, providing a clean, factory-look replacement that covers gaps and worn trim on compatible units. What it does:

• Replaces damaged, scratched or missing front trim to improve the appliance's appearance.
• Covers gaps where original trim has warped, peeled, or broken.
• Helps maintain a consistent seal line and edge protection around the door or control opening.
• Matches the original black finish to blend with the surrounding cabinet or door surface.

• One black front trim frame.

• High-level replacement; remove power and open door or panel before starting.
• Handle trim carefully to avoid scratching the finish during installation.
• Retain and reuse any original clips or screws when possible; replace only if supplied or specified.

The Oven Control Panel Trim Kit is an OEM part compatible with GE ranges and wall ovens. It houses and frames the control panel interface, touch controls, display screen, and related electronic components of the appliance. The trim panel serves to protect these sensitive interior systems.

Causes of a bad control panel trim kit can include cracks, peeling, discoloration, or other signs of wear and damage due to repeated heat exposure during baking and roasting. The trim surrounds oven controls that endure temperature fluctuations each time the door is opened.

Symptoms of a bad oven control panel trim kit include: 

• Glitches or faulty responses from touch controls
• Water leaks behind or around the control panel 
• Visible cracking, peeling, or broken plastic sections
• Sensitivity issues or unresponsive buttons

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore wall oven models.

This left-hand door handle bracket secures the refrigerator door handle to the door, restoring a stable grip and proper handle alignment. Durable replacement part helps stop a loose or wobbly handle and keeps the door operating smoothly. What it does:

• Mounts the door handle to the left side of the refrigerator door
• Provides a secure anchor to prevent handle movement or sagging
• Restores proper handle alignment for comfortable opening and closing
• Helps eliminate rattling or looseness when the door is used

• One left-hand door handle bracket

• Designed for direct replacement; inspect mounting screws and handle for wear before installing
• Use basic hand tools; avoid overtightening fasteners to prevent cracking the bracket
• Disconnect power only when working near electrical components; follow appliance safety guidance
• If screws or handle hardware are missing or damaged, replace those parts as well

This right-side door trim bracket secures the exterior trim to the appliance door, restoring a flush, finished appearance and preventing the trim from coming loose. Designed to replace a damaged or missing right-hand bracket. What it does:

• Holds the door trim in place on the right side to maintain alignment and appearance
• Prevents trim gaps, vibration noise, and rattling caused by a loose or broken bracket
• Restores proper trim attachment after collision, wear, or failed fasteners
• Works with the factory trim assembly to ensure a straight, secure fit

• One right-side door trim bracket

• Use basic hand tools; retain any reusable screws or clips unless damaged
• Power off and unplug the appliance before starting work for safety
• Align the bracket and trim before tightening fasteners to avoid cracking the trim
• Replace missing or damaged clips or screws with OEM-specified fasteners