Need Help?
Call
Fix F2 error codes and inaccurate oven temperatures by replacing a faulty temperature sensor. Simple 15-minute DIY repair with basic tools.
My mother's GE range was not coming up to full heat (very far from it), and I was hearing a lot of relay-clicking coming from the control board. The heating elements seemed good. I suspected the control board was faulty, but there was a chance that it might be the (*much* less expensive) temperature sensor, so I ordered both from AppliancePartsPros.com (which got the parts to me very fast) so I could try the T-sensor first. After removing the doors and the back panel of the oven, and taking out... Read more
Burner stopped working or won't heat properly? This dual radiant surface element restores full cooking function. DIY-friendly repair, typically 30 minutes.
Ordered part, reviewed several videos demonstrating replacement of burner. Read more
The Bake Element is an OEM part for GE wall ovens and ranges. It generates the necessary heat through a series of exposed coils to bake and brown food consistently. Symptoms of a failed bake element include:
Causes may be normal wear of the coil material over many use cycles in high heat. Without a functioning bake element, the oven cannot reliably or safely perform its baking function. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Replaced element. The new element was perfect. The shipping was perfect. Installation would have taken less than 10 minutes if the two range wires attaching to element had been 1 inch longer. Attached thin nosed vice grips to wires at spade terminals to facilitate attachment to element. The repair was simple enough but it would have been perfect if GE engineers had made wires 1 inch longer. Read more
Replace cracked, broken, or shattered oven door window glass. This assembly includes the glass pane and securing brackets that install inside your range door.
The glass on my GE oven shattered when my wife was broiling food. I looked up the repair and found that this was a known issue with these ovens. I googled replacement glass and found that AppliancPartsPros.com had the full replacement glass unit. I was able to verify that the part I was ordering was compatible with my oven. On the website they showed the part and also a tutorial on replacing the glass unit. The repair seemed easy so I ordered the part. The part came quickly and was in... Read more
This is a cooling fan sensor board that monitors and controls the operation of the cooling fan in a range or oven. It helps regulate internal temperatures by signaling the fan to run during and after cooking to protect electronic components from overheating. Replace this board if the cooling fan does not turn on, runs continuously, or if you receive error codes related to the cooling fan or oven temperature regulation.
You will need a Philips screwdriver, nut driver, and star drivers for this repair. Cordless drill recommended. TURN OFF THE CIRCUIT BREAKER BEFORE STARTING!!! You'll need to disassemble the cord cap before pulling the unit. Take a picture to remember which wires are connected to which terminals. Placed a blanket on the floor for protection and mobility. Removed cooking racks and both doors, then pulled the oven, which is the hardest part to do alone. It's a heavy unit. Once on the blanket I... Read more
Burner not heating? This 5.5" radiant element fits beneath glass cooktops. Common fix for non-working burners. Moderate DIY, 20-30 minutes to replace.
Raised ceramic top, removed old element, installed the new one. Read more
Oven rack for electric ranges. Slides into oven cavity to hold cookware during baking. Replace if cracked, bent, warped, or missing a second rack.
Rack were ordered and delivered in one day. great service. Read more
Clear glass lens that protects your oven light bulb. Replace if cracked, broken, or cloudy to safely view cooking progress. Confirm fit with model number.
Tested the power to the unit by turning on the cooktop portion and saw that I had power to all of the burners. Turned the selector knob to broil and saw that the top element would heat up. I then turned off the breaker to the unit. I then decided to take out the baking element to do a continuity test. When I touched it, a 1.5 inch section fell out. Since that concluded my continuity test, I assumed I needed a baking element. After receiving the parts the NEXT DAY (amazingly great service... Read more
Range won't heat or burners stopped working? A burnt or melted terminal block may be the cause. This wiring connection hub routes power to elements. DIY repair in 10-20 minutes.
Removed damage terminal block ordered new block on line. when I received new block installed it stove works fine easy to replace. If I had not been home at the time when this happen it may had cause a big house fire. Read more
The Rear Door Support is an OEM replacement part for GE ranges. Located at the base of the range, this bracket provides weight-bearing support for the lower oven drawer. It facilitates smooth extension and retraction of the drawer. Causes of faulty support can include cracks or fractures developing over extended use, worn joints unable to sustain drawer weight, or misalignment from repeated opening/closing stress. Symptoms of a bad support include:
This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore ranges.
So, in the process of a kitchen remodel my GC managed to lose *both* of the rear plastic supports for my GE stove! The drawer was totally unsupported without the brackets. I managed to find them on your site and see that they were a new and better design (rear mount with screw vs side mount and no firm mounting). The install was a snap and the brackets work excellent. I wish I knew that there was a new design years ago or I would have bought them much sooner! Thanks!! Read more
The Cooling Fan Assembly is an OEM part for GE ovens, essential for maintaining optimal temperature by circulating air. It activates at a set temperature to dissipate heat efficiently, safeguarding sensitive parts. With time, it may wear out due to debris, mechanical, or electrical issues, potentially causing overheating.
Causes of a faulty Cooling Fan Assembly can vary. Mechanical wear from prolonged use can reduce efficiency or cause failure. Electrical issues like faulty wiring can impact fan operation. Dust buildup can block fan blades, affecting performance.
Symptoms indicating the need for a replacement Cooling Fan Assembly include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I googled a GE stove 1 to 5 years old and up came the part # and the same flashing F350. Fortunately, my son was home for Christmas and he replaced the parts ordered. The stove is working perfectly. Read more
The Handle and End Cap Assembly is an OEM replacement part for GE ranges. It is a stainless steel colored handle with the mounting encaps already attached.
Causes of a bad handle and end cap assembly can include normal wear from frequent use over many years. Damage from accidental impacts is also possible.
Symptoms of a bad handle and end cap assembly include:
This OEM part is also compatible with some models produced by Hotpoint, Amana, and Sears Kenmore.
Replace the oven door handle. Read more
Replace your cracked or broken electric range cooktop glass assembly. This tempered glass surface installs as the main cooking top on your range.
Swapped the top out with a new one from AppliancePartsPros.com. Read more
Replace your range's light receptacle socket when the oven light flickers or won't turn on. Easy DIY fix restores proper bulb connection. Confirm fit by model.
Called Appliance Parts - service agent was extremely helpful. Tried to find an assembled piece was unable to do so. Send me the individual parts which were very easy to assemble. Was able to replace entire light assembly, reconnect wire with new terminal end. Light works find just now. Would definitely call again if I needed assistance. Read more
Broil element won't heat or heats unevenly? This electric range broil element assembly generates intense top heat for broiling. DIY-friendly, 15-minute fix.
Replaced with item from appliance parts pro. Direct fit. 15 min job. Read more
Clear protective lens for range indicator lights. Replace when cracked, discolored, or missing to restore visibility of cooktop status lights. Verify fit with your range model number.
The broiler element had continuity, but no voltage when turned on. Replaced Control Board & Overlay and now works. Take clear photos before removing wires from the old board. Need only T15 Torx driver tool. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.