Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The F9 error code is supposed to indicate that the door lock mechanism has failed. My oven would give the F9 code and turn off during normal baking at 400 F after about 30-40 minutes. It turns out that GE must have programmed the error codes incorrectly in my model, because the real problem was that my control board cooling fan was no longer functional, and one of the two thermal switches was shutting off the unit when the control board area got too hot. AppliancePartsPros.com is one of the... Read more
Tenants in rental unit explained problem, I ordered replacement hinges for both the left and right. After replacing both, it was determined that a cleaning person removed and didn't reinstall the bottom heat plate of oven back into position, which was the reason the door wasn't closing. Read more
After googling this problem and realizing a built in microwave/oven would be at least 1500 dollars to repair, I decided to try to replace the wave guide cover. This is where the sparks seemed to be coming from. Taking the old one out was easy, it just popped out using a knife. Within seconds of putting the new one in, I was able to verify this was the problem with the sparking. So an easy fix with a $6 part! Read more
GE JKP90DP1BB over oven microwave would not power up after overcooking by a tenant. Removed control panel with 2 screws to access and check the main power ceramic fuse, thermal fuse, and top primary Interlock Switch, middle Monitor switch, bottom Secondary interlock relay. All done with difficulty without removing the microwave. No problem found. Removed microwave from above oven mounting and found addition thermal fuse cook senor on left near vented interior cavity open (fuse cooked), with... Read more
I have one of those combo units with the microwave on top and the oven on the bottom. The thermometer switch located on the upper right side mounted on top of the magnetron read open on a continuity test. Replaced the thermal fuse. Everything works fine now. Note: The thermal switch on the left side read closed, the fan switch on the lower right side read open. I just watched some youtube videos on what and how to test the components. The 20A fuse was good. So I tested the thermal... Read more
10-32 F HXW 3/4 S
1) By using google to find videos on why the door wouldn't close, I found out I needed new cams, those same videos also showed how to remove and replace the door. 2) Then by googling the fridge model number and the word 'cam', I was able to find the parts. 3) Taking the door off was simple, I needed a phillips head screwdriver to remove the hinge cover, however the screws in the hinge plate were so tight, I needed a side handle socket wrench to loosen them. 4) The door itself is not hard to... Read more
Ordered the oven control and put it on. Read more
Replaced the latch device which contains the motor and two limit switches Read more