Jvm149dbh02 Parts

The top screw is easy to get at after the door yoke is removed. The lower is behind the plate that holds the glass and door together. I removed the door very simple just lift up in the full open position .lay the door on a towel and drill a 1/4 inch hole over the head of the screw and you now can remove the screw with out disassembling the door. Something the factory should have done! Also if your door is sagging it will put stress on the handle. use a adjustable wrench and twist the hinges to... Read more

I replaced the parts with the help of a video provided by Appliance Parts Pros! There was enough detail that I was able to figure out what to do for my model of Advantium and the replacement went very well! It's like having a new appliance! Read more

Removed door from hinge best to use putty knife to push on clips to remove inner seal but broke clips anyway. Remove screws and pry clips to remove metal inner frame to access screws for handle. Read more

Watching some helpful do-it-yourself hints on Vidoes. Had to disasemble the door, because the screws for fastening the handle where hidden behind the inner part of the door. Videos did not show the step of unscrewing 6 tiny gold colored screws that held the door assembly together. Then used a screwdriver to pop off the plastic door cover with the window. The handle was easily and securely fastened into the plastic door cover. Just as a precaution, I disconnected the electric cord. ... Read more

My husband was able to take the door apart and install the handle once we received it. Read more

Spoke to a very helpful lady technician and we decided the fan was due to be replaced. I promptly received the fan assembly and with the help of my wife we started our dissambly. We found out quickly that the had built a microwave around the fan! With the unit spread all over the kitchen and dining room! Went fairly smooth and the diagnosis was spot on, the fan fixed my wife's convection /microwave with the help of your tech! We celebrated this morning with blueberry muffins baked in the... Read more

14 year old GE Profile microwave wouldn't heat, but had power. Read reviews here. Ordered triumvirate of magnetron, capacitor, & diode. Was hoping not to need the capacitor as this was an expensive part; and if not needed to return to AppliancePartsPros, which has been SOP. After watching a couple YouTube videos of microwave capacitors being shorted, I made a capacitor discharge tool ordering 24W 100K Ohm resistor and high voltage test wires w/ alligator clips from amazon. At the same time,... Read more

Called appliancepartspros for some help.They suggested the noise filter was bad I also checked the thermostats found one of them bad.Replaced both items did bring unit back to life but still would not heat,it appears there are problems with the megatron also found some burnt wires on the transformer took it to the repair shop.Would not have got that far if it had not been for the appliancepartspros giving me some help. Read more