Jvm1540 Parts

This control panel assembly restores the microwave's user interface—the area you press to select cook options and view the display. Replace a cracked, loose, or unresponsive panel to bring normal controls and appearance back.

• Forms the front user-interface area for selecting functions and viewing time/status
• Provides the fascia and mounting structure for the control components behind the panel
• Helps resolve non-responsive keys, stuck buttons, or damaged/broken panel trim
• Restores proper alignment and a finished look of the control area

• Disconnect power at the breaker before servicing; microwaves contain high-voltage components
• Remove mounting screws, lift off the panel, and label/disconnect wiring harnesses
• Transfer any reusable components (control board, display, brackets/clips) from the old panel as required by your model
• Reinstall, secure fasteners, restore power, and test all keypad functions.

This replacement rack holder supports the removable wire rack inside your microwave, keeping it steady and level. Replace a cracked or missing holder to restore stable, reliable two-level cooking performance. What it does:

• Holds the interior wire rack securely against the cavity wall
• Maintains correct rack height and alignment for stable support
• Helps prevent rack wobbling, slipping, or rattling during use
• Common signs of failure: cracked/heat-damaged holder, rack tilts or falls, scorch/arcing marks near the support

• 1 rack holder

• Disconnect power by unplugging the microwave or switching off the circuit breaker
• Remove the wire rack and note the holder's orientation and location
• Remove the existing holder (release clip or remove screw) and transfer any original mounting hardware if needed
• Seat the new holder fully, reinstall the rack level, and test with a microwave-safe cup of water

This microwave high-voltage transformer steps household AC up to the high voltage required by the magnetron to generate microwave energy. Replacing a failed transformer restores heat when the oven runs but food remains cold.

• Steps up line voltage to supply the magnetron during cooking
• Common symptom of failure: microwave runs but does not heat
• May also cause loud humming, a burning odor, or tripped breaker/fuse when energized
• Visual signs can include scorching or discoloration on the windings or terminals

• Disconnect power; the high-voltage capacitor can retain a dangerous charge—discharge it before servicing
• High-voltage microwave repairs are hazardous
• Note wire positions and mounting orientation before removal; transfer any brackets or insulators as configured
• Secure with original hardware and verify all connections are tight and routed clear of heat or moving parts

Grille assembly replaces the front vent and control-area trim on your range or oven, restoring a clean appearance and directing exhaust airflow. Ideal when the original grille is cracked, bent, loose, or missing. What it does:

• Covers the front vent/control area for a finished, factory look.
• Replaces cracked, dented, loose, or missing grille pieces that cause visible damage or rattling.
• Helps direct exhaust airflow out of the vent opening and keeps the area tidy.
• Uses the appliance's original mounting points for a direct replacement.

• Always disconnect power to the appliance before beginning any repairs.
• Installation typically requires removing the lower access panel or control trim to reach mounting screws/clips.
• Use common hand tools; handle the grille gently to avoid scratching the finish.

This control panel is the user console that houses the oven/range buttons and display, restoring normal operation and allowing program selection and status feedback. It replaces a cracked, unresponsive, or damaged front console. What it does:

• Provides the front keypad and display interface for programming temperatures, timers, and oven functions
• Restores responsive button input and clear status readouts when the original panel is cracked, worn, or non-functional
• Helps resolve issues where controls do not register presses or the display is obscured
• Works as the main user-access point for starting and stopping cycles and setting options

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Handle the panel carefully to avoid bending or damaging the display and connectors
• Some installations require removing the oven console trim and disconnecting wiring harnesses; keep screws and small parts organized

This run capacitor helps the appliance motor start and run smoothly by storing and releasing electrical energy. Replacing a worn capacitor can restore reliable motor operation and reduce abnormal motor noise or cycling. What it does:

• Provides the brief power boost motors need to start and maintain RPM
• Helps stabilize motor voltage and improve run efficiency under load
• Commonly linked to symptoms such as motors that hum but won't start, slow or intermittent motor operation, or unusual motor noise
• Reduces stress on motor windings that can lead to premature failure when functioning properly

• One motor capacitor

• Always disconnect power at the breaker or unplug the appliance before servicing
• Capacitors can hold a charge; discharge safely
• Observe proper polarity and mounting location during installation; secure wiring and connectors

A replacement control panel sub-assembly that restores the appliance's front console interface so the control board, touchpad or display connections sit securely and function correctly. Use when the console housing is cracked, loose, or failing to hold controls. What it does:

• Provides the mounting and connection point for the oven/range control board, touchpad and display components.
• Helps ensure reliable electrical connections between the user controls and main control electronics.
• Commonly replaces a damaged, cracked, or warped console that causes unresponsive buttons, intermittent display issues, or loose controls.
• Supports normal operation of front-panel features once the underlying electronic components are secure.

• One control panel sub-assembly.

• Always disconnect power to the appliance before starting any repair to avoid shock or injury.
• Handle the panel carefully to avoid scratching painted surfaces or damaging clips; some disassembly of the console and removal of knobs or trim may be required.
• Verify connector seating and routing during reassembly to prevent pinched wires or loose connections.
• If control buttons or the display still don't work after installation, the issue may be the touchpad or main control board—test those components separately.

This stirrer assembly circulates microwave energy inside the cavity so food heats more evenly and prevents cold spots. It replaces a damaged or noisy stirrer that can cause uneven cooking or unusual microwave noise. What it does:

• Spins the microwave stirrer to help distribute microwave energy for more even heating
• Reduces hotspots and cold spots during cooking
• Stops or reduces rattling, grinding, or squealing noises when the original stirrer is worn
• Helps prevent arcing or sparking caused by a cracked or broken stirrer cover

• Disconnect power at the breaker or unplug the appliance before servicing to avoid electrical shock.
• Access may require removing the microwave's outer cabinet or control panel; follow OEM service manual steps.
• Handle the stirrer and cover carefully—plastic parts can crack if forced.

This control panel is the user interface assembly that houses the touchpads/buttons and display used to operate the range/oven. Replacing a damaged or unresponsive panel restores normal control and visible cycle feedback. What it does:

• Provides the buttons/touchpads and display needed to select bake, broil, timers, and other oven functions
• Relays user commands to the oven's main control so cycles start and stop as expected
• Restores visible status/error indicators when the original panel is cracked, faded, or nonresponsive
• Helps resolve common symptoms like unresponsive buttons, missing display segments, or erratic control behavior

• One control panel (user interface assembly)

• Disconnect power at the breaker before beginning any work to avoid shock or injury
• Handle the panel and any attached ribbon/cable with care to avoid damaging fragile connectors or the display
• Basic hand tools are typically needed to remove trim and fasteners; reattach connectors securely before restoring power