Jvm1540mp1sa Parts

Guide roller (TT) supports the appliance drum and keeps it aligned for smooth rotation. Replacing a worn guide roller reduces noise, prevents rubbing, and helps restore proper drum tracking. What it does:

• Supports and guides the drum/tub so it spins smoothly and stays centered.
• Reduces metal-on-metal rubbing and squeaking caused by worn rollers or bearings.
• Helps prevent uneven wear on the drum, belt, and seals.
• Improves drum tracking and overall operation when worn or damaged.

• Disconnect electrical power (and turn off gas supply on gas models) before starting any repair.
• Access may require removing the dryer cabinet or drum.
• Inspect other rollers, shafts, bearings, and the drive belt; replace as needed to avoid repeat failures.
• Use appropriate hand tools and support the drum during removal to avoid damage or injury.

This mounting plate assembly is the rear wall bracket that supports and secures the microwave during installation. Replacing a bent or missing plate ensures a safe, level mount and stable operation without vibration or shifting.

• Acts as the rear-wall support the microwave hangs on and bolts to
• Maintains proper, level alignment of the unit and door
• Helps prevent vibration, rattling, or shifting during use
• Replace if the plate is bent, damaged, corroded, or missing

• Disconnect power and have a second person support the microwave before removal/installation
• Follow your model's installation template and manual for hole locations and hardware
• Fasten to wall studs or appropriate anchors; level the plate before tightening
• Verify clearances and door swing before fully tightening mounting hardware

This turntable coupler connects the microwave's turntable motor to the glass tray to drive smooth rotation during cooking. Replacing a worn coupler restores even heating and prevents the tray from slipping, stalling, or wobbling. What it does:

• Transfers rotation from the turntable motor to the glass tray
• Centers and supports the tray for stable, even spinning
• When worn or cracked, may cause the turntable not to turn, slip, wobble, or click/grind at the center hub
• Helps restore consistent heating by ensuring proper tray movement

• 1 turntable coupler

• Disconnect power by unplugging the microwave or switching off the breaker before service
• Remove the glass tray and roller ring; lift the old coupler straight up off the motor shaft
• Align the new coupler with the shaft and press firmly until fully seated

This activated charcoal filter serves the recirculating vent system. It adsorbs cooking odors when air isn't vented outdoors, restoring odor-reduction performance and helping the fan move air freely once the old filter becomes saturated. What it does:

• Adsorbs odors and smoke particles from air recirculated through the vent system
• Helps maintain effective ventilation when the original filter is saturated
• Common signs to replace: persistent odors, reduced airflow, or a dark/greasy/damaged filter
• For models configured for recirculating (non-vented) operation

• One charcoal filter

• Disconnect power to the appliance before servicing
• Remove the vent grille or filter cover to access the charcoal filter (location varies by model)
• Release and remove the old filter; install the new filter in the same orientation and seat fully
• Reinstall covers, restore power, and run the fan to verify airflow

This latch body is the door latch component that secures the appliance door during operation, restoring reliable closure so cycles can run normally. Use it to replace a worn or damaged latch that won't hold the door closed. What it does:

• Engages the door striker to hold the door closed and maintain a proper seal during operation
• Works with the door latch mechanism so the appliance can complete cycles that require a closed door
• Common symptom: door won't stay closed, is difficult to latch, or feels loose at the latch point
• Replacing a damaged latch body can prevent intermittent door-open errors and restore normal door operation

• Disconnect power (unplug or turn off circuit breaker) before starting any repair
• Remove the door or access panel as needed; keep track of fasteners and any trim pieces
• Handle door glass and trim carefully to avoid damage; test latch engagement before full reassembly

This holder nut assembly secures a component to the appliance frame, restoring proper mounting and reducing vibration or movement. Replace a damaged or missing holder nut to keep connected parts stable and functioning. What it does:

• Secures a component or assembly to the appliance frame or mounting bracket
• Prevents looseness, rattling, and misalignment caused by worn or missing mounting hardware
• Restores a safe, stable connection that helps maintain normal operation
• Matches OEM mounting geometry for a direct replacement when the original nut is damaged

• Disconnect power to the appliance before servicing to avoid shock or injury
• Access the mounting area by removing the appropriate panel or cover per your model's service instructions
• Start threads by hand to avoid cross-threading, then tighten with the correct tool; do not overtighten
• If any fasteners or nearby components are damaged, replace them as needed for a secure installation

This TCO cavity is a thermal cutoff assembly that helps prevent oven overheating by interrupting power if temperatures get too high. It replaces a failed cutoff to restore proper temperature safety control. What it does:

• Acts as a temperature safety device that opens the circuit when excessive heat is detected
• Helps prevent overheating-related damage or fire risk when operating the oven
• Common symptom: oven or burner stops heating or cycles off unexpectedly
• Common symptom: oven will not maintain set temperature or complete heating cycles

• Disconnect power to the appliance before servicing to avoid electrical shock
• Replace with the exact part number; follow OEM wiring and mounting orientation
• Inspect surrounding wiring and insulation for heat damage; replace if frayed

This magnetron assembly produces the microwave energy used to heat food and includes a built-in thermal cutoff for overheating protection. Replacing a failed magnetron restores heating performance and safe operation in microwave ovens. What it does:

• Generates high-frequency microwaves that cook and warm food.
• Thermal cutoff helps stop operation if the magnetron overheats.
• Commonly replaced when the oven stops heating, heats intermittently, or has weak heating.
• If the oven produces loud humming, arcing, or unusual burning smells.

• Disconnect power and unplug the appliance before service.
• High-voltage components (magnetron and capacitor) can retain lethal charge — discharge the capacitor and follow safety procedures.
• Handle the magnetron carefully; avoid touching terminals or the ceramic output window.

This Cover-Stirrer protects the microwave's stirrer assembly and helps direct microwave energy for more even cooking. It's a direct-replacement plastic cover that restores proper operation and prevents debris from reaching the stirrer. What it does:

• Shields the stirrer/fan area from food splatter and debris to prevent damage.
• Helps maintain proper microwave energy distribution so food heats more evenly.
• Prevents contact with moving stirrer components for safer operation.
• A cracked or missing cover can lead to uneven heating, noise, or arcing.

• One Cover-Stirrer

• Disconnect power to the appliance before servicing.
• Remove the microwave's inner components or cavity access panels to reach the stirrer area.
• Align and seat the cover securely over the stirrer assembly; do not force or overtighten.
• If the existing cover is damaged, replace it; inspect surrounding components for damage or wear.

This noise filter assembly is a direct-replacement line filter that helps reduce electrical interference and appliance noise for compatible GE appliances. It restores cleaner power to control boards and can help stop buzzing or interference-related behavior. What it does:

• Suppresses incoming electrical noise and RF interference on the power line
• Helps prevent control glitches and erratic behavior caused by voltage transients
• Can reduce humming, buzzing, or audio/EMI interference from the appliance
• Supports stable operation of electronic controls and sensors

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle wiring and connectors carefully; match wires/terminals exactly on reassembly
• Secure the filter in its mounting location and ensure wiring is routed clear of moving parts

This cover-damper is the replacement plastic cover that fits over the refrigerator air damper to help direct cold air between compartments for more consistent cooling. Replaces a cracked, broken or missing damper cover. What it does:

• Protects the damper assembly and helps channel airflow from the evaporator to the fresh-food and freezer compartments
• Restores proper air direction when a broken cover causes uneven temperatures or poor cooling
• Works with the damper to reduce drafts and improve compartment temperature balance
• Simple, passive part that mounts to the damper housing

• One cover-damper

• Disconnect power to the appliance before starting any repair
• Remove interior panels or shelves as needed to access the damper housing; handle plastic clips gently to avoid breakage
• Verify fit and orientation against the existing part before finalizing installation
• If the damper motor or actuator is damaged or the issue persists after installing this cover, inspect the full damper assembly

This washered screw secures panels and internal components where a combined screw-and-washer fastener is required, restoring proper fit and stopping movement or rattling. Simple replacement with the correct fastener keeps assemblies aligned and stable. What it does

• Secures panels, brackets or components where a washered screw is specified
• Replaces missing, stripped or corroded fasteners that allow vibration or gaps
• Helps stop rattling, loose panels or misaligned parts caused by a failed screw
• Provides a sealed bearing surface to distribute load and prevent pull-through

• One washered screw

• Disconnect power and/or water to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid cam-out and fastener damage
• Align parts before tightening and snug; avoid over-tightening which can strip threads or crack plastic

This replacement rack holder supports the removable wire rack inside your microwave, keeping it steady and level. Replace a cracked or missing holder to restore stable, reliable two-level cooking performance. What it does:

• Holds the interior wire rack securely against the cavity wall
• Maintains correct rack height and alignment for stable support
• Helps prevent rack wobbling, slipping, or rattling during use
• Common signs of failure: cracked/heat-damaged holder, rack tilts or falls, scorch/arcing marks near the support

• 1 rack holder

• Disconnect power by unplugging the microwave or switching off the circuit breaker
• Remove the wire rack and note the holder's orientation and location
• Remove the existing holder (release clip or remove screw) and transfer any original mounting hardware if needed
• Seat the new holder fully, reinstall the rack level, and test with a microwave-safe cup of water