Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Took it off the wall and took it into my work shop. Took it all apart found 1/2" of caked on grease all over everything including the fan. This is the only fan over my stove. Scraped and cleaned it all using degreaser in a spray can for electronics. Removed the ventilation motor and replaced the interior light, Once unit was clean and dry reassembled and reinstalled. All works fine. Read more
I have one of those combo units with the microwave on top and the oven on the bottom. The thermometer switch located on the upper right side mounted on top of the magnetron read open on a continuity test. Replaced the thermal fuse. Everything works fine now. Note: The thermal switch on the left side read closed, the fan switch on the lower right side read open. I just watched some youtube videos on what and how to test the components. The 20A fuse was good. So I tested the thermal... Read more
Changed out the Power control main-module. Read more
Color: silver. Measures about 11-1/8" x 6-1/4". For matching aluminum filter, use: WB6X486.
The charcoal filter in the GE Microwave Oven was falling apart. Despite the directions, it is difficult to pull out but eventually worked it around the outer flange. Putting the new one in is a simple slide in. Then replace the grill and put the two screws back in. Read more
Ordered new film, cut to size with a T square and an exacto knife, use old film as a template. Round corners with a nail clipper. Apply to inside of door, good as new in 15 minutes! Great service, speedy too. Read more
This is the complete door assembly for your over-the-range microwave, including the outer panel, window, and handle. It provides access to the cooking chamber while containing microwave energy safely during operation. Replace this part if the door doesn't close properly, the handle is broken, or if the door window is cracked or damaged.
It broke at about 2pm. I got on e-how to see howto fix the door. I disassembled the door and found the problem. I then called the parts store identified the part and ordered the part. I received confirmation of shipment at 5:56 pm. The next morning the part was delivered. I opened the package to be certain I got the right- YES. Then I looked at the clock it said 8:54am. Less than 15 hours after it was shipped. The door was reassembled and working within 24 hours after it broke. Read more
This decorative outer frame surrounds the microwave door and provides a finished appearance in almond color. It covers the door mechanism and integrates with your kitchen's aesthetic while protecting internal components. Replace this part if the frame is cracked, discolored, or damaged from normal wear and tear.
Ordered, received and replaced each damages item. Watched a YouTube video on how to do it. Only problem with the video is that it doesn't explain that the front glass is attached to the door cover. I was lucky the glass didn't fall out and it was a bit tricky figuring out how to slide and snap the glass into the cover. Read more
This is the outer door frame found on microwave ovens. It is an authentic OEM part sourced directly from the manufacturer. The door frame is made of heavy-duty plastic but could crack or warp over time with heavy use. If the door frame breaks, it should be replaced. This door frame does not include the handles. If the handles are broken, those will need to be purchased separately.To start, disconnect the power from the microwave. A screwdriver is required to install the outer door frame. Remove the door handles from the frame. The handles are screwed in from the inside of the door. Remove the interior door panel and unscrew the handles. Set the handles and screws to the side. Unsnap the front panel from the door and discard it. Line the new panel up and push it in place until it snaps. Reinstall the door handles and interior door panel. Connect the power and make sure the door opens and closes correctly.This door frame is made of black plastic and is sold individually. It is designed for use on microwave ovens manufactured by General Electric and Hotpoint.
With the help of you tube clip. AppliancepartsPro technician on you tube video helped me understand different components of the microwave door and how I could purchase the genuine parts from them and easily install it myself. That is what I did and now I have a brand new looking microwave. Read more
Taking all the pieces apart is quite difficult. You have to bend the plastic pieces in just the right way, all while avoiding damaging anything permanently. It was stressful. Still, in the end, and after multiple attempts I did get everything attached correctly and now I have a working door/microwave. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.